NJ 2.5" ss exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rlm316 · 01-29-2013, 05:41 PM

SS exhaust lightly polished by me. Exits behind the rear wheel. No mufflers, but i will include a new wpiece of pipe that I just bought from Summit. I'd like $225 plus shipping. I'd prefer pick up, but I'll ship if necessary. Thanks, Lane

Street Smart · 01-29-2013, 07:20 PM

Looks like Magnaflow, is it used?

rlm316 · 01-29-2013, 09:16 PM

Yes and yes. It wasn't over heated or warped. I cleaned it all up and it slides together very nice. I was going to use it on my build but I want to have the pipes exit the rear.

LEX · 01-29-2013, 09:39 PM

Would probably be killer, but what do you think shipping would be to a commercial addy in TX 77040?

Billett · 01-29-2013, 10:11 PM

This for a shortbed or long? Wish you had put it up a few months ago... I just got mine done out the back and I kind of wish I had done it out the sides behind the wheel.

**paul mora** · 01-29-2013, 10:41 PM

I am interested in buying if it is for a long bed. You can ship to a commercial address in California 92648
Posted via Mobile Device

rlm316 · 01-29-2013, 11:36 PM

Lex- not sure, I need to pack it and weigh it.

Billet & Paul Mora- I was fitting it under my long bed. Looked right to me.

I'll throw in a set of collectors & flanges also. Not sure if they are SS.

LEX · 01-29-2013, 11:51 PM

Thanks. Let me know.
Posted via Mobile Device

**WIDESIDE72** · 01-30-2013, 12:52 AM

Interested pending shipping to leander tx 78641...BTW, was this fabbed to go through a modified crossmember or under a stock one?
Posted via Mobile Device

**paul mora** · 01-30-2013, 11:04 AM

I guess I am in line behind Lex and Billet. I will take pending the shipping cost
Posted via Mobile Device

Billett · 01-30-2013, 11:12 AM

Just to clarify, I'm not in line. Just bumping for a local

rlm316 · 01-31-2013, 02:06 PM

I've got too many irons in the fire to box this and weigh it for a pass, so I'm going to say $25 shipping and any difference, I'll eat. So that would be $250 shipped. First " I'll take it" gets it. Lane

**WIDESIDE72** · 01-31-2013, 02:49 PM

Was this fabbed to go through a modified crossmember or under a stock one?
Posted via Mobile Device

f.monroe · 01-31-2013, 03:24 PM

If it gets to me I will take it. PM me if it gets that far. I do not want to jump anyone in line bit I am in if they all pass.
Frank

rlm316 · 01-31-2013, 03:32 PM

Under the Stock.
Posted via Mobile Device

LEX · 01-31-2013, 03:41 PM

I need a through x-member. I'll pass this awesome deal to the next person.

**paul mora** · 01-31-2013, 04:36 PM

I will take it
Posted via Mobile Device

rlm316 · 01-31-2013, 04:51 PM

Sold to Paul Mora pending payment. I'll pm with payment info. Thanks, Lane

**paul mora** · 01-31-2013, 05:18 PM

I will go to the bank to get cashiers check then get you yhe address . Should done in one hour and in today's mail
Posted via Mobile Device

Just dropped it in the mail sent pm for milling address

01-29-2013, 05:41 PM	#1
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	2.5" ss exhaust SS exhaust lightly polished by me. Exits behind the rear wheel. No mufflers, but i will include a new wpiece of pipe that I just bought from Summit. I'd like $225 plus shipping. I'd prefer pick up, but I'll ship if necessary. Thanks, Lane

01-29-2013, 07:20 PM	#2
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: 2.5" ss exhaust Looks like Magnaflow, is it used? __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

01-29-2013, 09:16 PM	#3
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 2.5" ss exhaust Yes and yes. It wasn't over heated or warped. I cleaned it all up and it slides together very nice. I was going to use it on my build but I want to have the pipes exit the rear.

01-29-2013, 09:39 PM	#4
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: 2.5" ss exhaust Would probably be killer, but what do you think shipping would be to a commercial addy in TX 77040?

01-29-2013, 10:11 PM	#5
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: 2.5" ss exhaust This for a shortbed or long? Wish you had put it up a few months ago... I just got mine done out the back and I kind of wish I had done it out the sides behind the wheel. __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

01-29-2013, 10:41 PM	#6
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: 2.5" ss exhaust I am interested in buying if it is for a long bed. You can ship to a commercial address in California 92648 Posted via Mobile Device __________________ Pulatoy

01-29-2013, 11:36 PM	#7
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 2.5" ss exhaust Lex- not sure, I need to pack it and weigh it. Billet & Paul Mora- I was fitting it under my long bed. Looked right to me. I'll throw in a set of collectors & flanges also. Not sure if they are SS.

01-29-2013, 11:51 PM	#8
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: 2.5" ss exhaust Thanks. Let me know. Posted via Mobile Device

01-30-2013, 12:52 AM	#9
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 2.5" ss exhaust Interested pending shipping to leander tx 78641...BTW, was this fabbed to go through a modified crossmember or under a stock one? Posted via Mobile Device

01-30-2013, 11:04 AM	#10
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: 2.5" ss exhaust I guess I am in line behind Lex and Billet. I will take pending the shipping cost Posted via Mobile Device __________________ Pulatoy

01-30-2013, 11:12 AM	#11
Billett Registered User Join Date: Jun 2012 Location: Pittsgrove, NJ Posts: 1,502	Re: 2.5" ss exhaust Just to clarify, I'm not in line. Just bumping for a local __________________ Will 1968 C10 - Project Texa Go 6.0/4L80e 2003 Mitsubishi Lancer Evolution 2002 Ford Excursion 7.3L 2024 Toyota Sienna

01-31-2013, 02:06 PM	#12
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 2.5" ss exhaust I've got too many irons in the fire to box this and weigh it for a pass, so I'm going to say $25 shipping and any difference, I'll eat. So that would be $250 shipped. First " I'll take it" gets it. Lane

01-31-2013, 02:49 PM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 2.5" ss exhaust Was this fabbed to go through a modified crossmember or under a stock one? Posted via Mobile Device

01-31-2013, 03:24 PM	#14
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 2.5" ss exhaust If it gets to me I will take it. PM me if it gets that far. I do not want to jump anyone in line bit I am in if they all pass. Frank __________________ Born and proudly residing in a Red State !

01-31-2013, 03:32 PM	#15
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 2.5" ss exhaust Under the Stock. Posted via Mobile Device



Register or Log In To remove these advertisements.

01-31-2013, 03:41 PM	#16
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: 2.5" ss exhaust I need a through x-member. I'll pass this awesome deal to the next person.

01-31-2013, 04:36 PM	#17
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: 2.5" ss exhaust I will take it Posted via Mobile Device __________________ Pulatoy

01-31-2013, 04:51 PM	#18
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 2.5" ss exhaust Sold to Paul Mora pending payment. I'll pm with payment info. Thanks, Lane

01-31-2013, 05:18 PM	#19
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: 2.5" ss exhaust I will go to the bank to get cashiers check then get you yhe address . Should done in one hour and in today's mail Posted via Mobile Device Just dropped it in the mail sent pm for milling address __________________ Pulatoy Last edited by paul mora; 01-31-2013 at 07:16 PM.

Register or Log In To remove these advertisements.