Clear Valve Covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andy4639 · 02-05-2013, 10:32 PM

Well I have the clear diff cover may as well buy a set of these to go along with it! What do you think? $250.00 a set, anybody have a better price on them. Does anybody have them on a working engine by chance to give some feed back? If I buy them I will have to take the rockers all off and paint everything to make it pretty inside the covers.

http://clearvueconcepts.com/products.htm

69GWC · 02-05-2013, 10:37 PM

Just get some nice roller rockers that are anodized Red..

ole dollor · 02-05-2013, 10:37 PM

Quote:

Originally Posted by Andy4639

Well I have the clear diff cover may as well buy a set of these to go along with it! What do you think? $250.00 a set, anybody have a better price on them. Does anybody have them on a working engine by chance to give some feed back? If I buy them I will have to take the rockers all off and paint everything to make it pretty inside the covers.

http://clearvueconcepts.com/products.htm

Andy...i would say that as soon as you start the motor your clear valve covers would not be clear any more....lol

fatgump · 02-05-2013, 10:40 PM

Hope they are non-stick.

Andy4639 · 02-05-2013, 10:41 PM

Quote:

Originally Posted by ole dollor

Andy...i would say that as soon as you start the motor your clear valve covers would not be clear any more....lol

Yea just like the gear cover but it says it will drip right off after you cut the engine off.

Quote:

At idle, oil gurgles above rockers showing complete valve train movement.
Oil sheets off valve cover after high rpm engine operation in about 30 seconds.

**jocko** · 02-05-2013, 10:47 PM

did you build "The Visible V8" model in your formative years?

Have never seen anywhere other than that... So, no lower price found. But if your diff is clear, might as well go all out.

Andy4639 · 02-05-2013, 10:53 PM

Quote:

69GWC,
Just get some nice roller rockers that are anodized Red..

Thought about that to!

Quote:

jocko,
did you build "The Visible V8" model in your formative years? Have never seen anywhere other than that... So, no lower price found. But if your diff is clear, might as well go all out.

Nope never did, I always wanted one though!
I'm going to call about them tomorrow and see what the best price they will give me. I like to have them but not for $250.00!

**Stocker** · 02-05-2013, 11:26 PM

Quote:

Originally Posted by jocko

did you build "The Visible V8" model in your formative years?

Yes I did..... then I disassembled it, put a light coat of vaseline on all the moving parts and reassembled it leaving the bellhousing off. Then I chucked the rear of the crankshaft into a drill motor......

c10monkey · 02-06-2013, 12:20 AM

Hmmm

You could put LEDs in them?

Andy4639 · 02-06-2013, 12:29 AM

Quote:

Originally Posted by c10monkey

Hmmm

You could put LEDs in them?

That's what everyone said about the clear diff cover too!

CParnell · 02-06-2013, 12:48 AM

Do it!

http://youtu.be/svjytSjd6g0

JayDubBlazer · 02-06-2013, 01:09 AM

Quote:

Originally Posted by CParnell

Do it!

http://youtu.be/svjytSjd6g0

Cool
Posted via Mobile Device

Andy4639 · 02-06-2013, 01:40 AM

Quote:

Originally Posted by CParnell

Do it!

http://youtu.be/svjytSjd6g0

That's pretty cool!

**special-K** · 02-06-2013, 07:54 AM

Do they make a clear air cleaner? That would be cool to watch the air going in the motor

BrutonLS1 · 02-06-2013, 08:40 AM

My buddy got these for a ford 351, he's got bright orange roller rockers, looks super cool. He hasn't started it yet though. Hopefully they don't just get covered in oil and fog....
Posted via Mobile Device

midniteblues · 02-06-2013, 08:51 AM

Quote:

Originally Posted by special-K

Do they make a clear air cleaner? That would be cool to watch the air going in the motor

I was thinking a clear intake now that would be cool

maybe somebody should make the clear oil pan also

Sequoyah · 02-06-2013, 09:45 AM

Quote:

Originally Posted by special-K

Do they make a clear air cleaner? That would be cool to watch the air going in the motor

lol

Andy4639 · 02-06-2013, 04:35 PM

Well as I stated in another post. I wished they made Lexan body parts like model cars. Then you could paint it from the inside and it wouldn't get scratched up like metal does.

Something like this.

02-05-2013, 10:32 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Clear Valve Covers Well I have the clear diff cover may as well buy a set of these to go along with it! What do you think? $250.00 a set, anybody have a better price on them. Does anybody have them on a working engine by chance to give some feed back? If I buy them I will have to take the rockers all off and paint everything to make it pretty inside the covers. http://clearvueconcepts.com/products.htm __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-05-2013, 10:37 PM	#2
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: Clear Valve Covers Just get some nice roller rockers that are anodized Red..

02-05-2013, 10:40 PM	#4
fatgump Registered User Join Date: Apr 2011 Location: Arizona Posts: 249	Re: Clear Valve Covers Hope they are non-stick.

02-05-2013, 10:47 PM	#6
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Clear Valve Covers did you build "The Visible V8" model in your formative years? Have never seen anywhere other than that... So, no lower price found. But if your diff is clear, might as well go all out. Attached Images

02-06-2013, 12:20 AM	#9
c10monkey Registered User Join Date: Oct 2012 Location: Lebanon Ohio Posts: 187	Re: Clear Valve Covers Hmmm You could put LEDs in them? __________________ 1971 Chevrolet C10 Inflation Fighter 1994 C3500 Crew Cab Dually 454

02-06-2013, 12:48 AM	#11
CParnell Registered User Join Date: Feb 2009 Location: Calgary, AB, Canada Posts: 156	Re: Clear Valve Covers Do it! http://youtu.be/svjytSjd6g0 __________________ 1968 GMC 910 Project Tommy 1974 Olds Cutlass

02-06-2013, 07:54 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Clear Valve Covers Do they make a clear air cleaner? That would be cool to watch the air going in the motor __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-06-2013, 08:40 AM	#15
BrutonLS1 Registered User Join Date: Oct 2012 Location: Weatherford, Tx Posts: 142	Re: Clear Valve Covers My buddy got these for a ford 351, he's got bright orange roller rockers, looks super cool. He hasn't started it yet though. Hopefully they don't just get covered in oil and fog.... Posted via Mobile Device __________________ -Bruton 1968 GMC long bed 5.7/700R4 --I'd rather push a Chevy, than drive a Ford.--

02-06-2013, 04:35 PM	#18
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Clear Valve Covers Well as I stated in another post. I wished they made Lexan body parts like model cars. Then you could paint it from the inside and it wouldn't get scratched up like metal does. Something like this. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.