FL PorterBuilt ECE 2 1/2" dropped spindles - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 01-20-2013, 10:32 AM

I will include new left and right 63-70 upper and lower ball joints, plus nice dust shields for $315 shipped.

**Hart_Rod** · 01-23-2013, 09:17 AM

bump

oldblue1968chevy · 01-23-2013, 01:07 PM

So these wont work with stock tie rod ends? Im abit confused here...

Would they fit a 69 crossmember with OEM componenets?

**Hart_Rod** · 01-23-2013, 01:29 PM

Quote:

Originally Posted by oldblue1968chevy

So these wont work with stock tie rod ends? Im abit confused here...

Would they fit a 69 crossmember with OEM componenets?

No, they were drilled out to 5/8th non tapered hole so you can bolt the heym joints to them.

oldblue1968chevy · 01-23-2013, 04:02 PM

Ah, rats

**Hart_Rod** · 01-26-2013, 09:30 AM

Quote:

Originally Posted by oldblue1968chevy

Ah, rats

, Saturday bump
Posted via Mobile Device

STOCKISH · 01-26-2013, 11:51 AM

You can buy heim joints and adjusters and use these on any truck, even without a rack and pinion steering setup. The pic is from this post.
http://67-72chevytrucks.com/vboard/s...d.php?t=335328

**lolife99** · 01-26-2013, 12:11 PM

Quote:

Originally Posted by 1972SuperCheyenne

You can buy heim joints and adjusters and use these on any truck, even without a rack and pinion steering setup. The pic is from this post.
http://67-72chevytrucks.com/vboard/s...d.php?t=335328

Correct.
But you would want the heim on top of the spindle tie rod location,... with a stock crossmember.

STOCKISH · 01-26-2013, 04:25 PM

^^True^^ I was just trying to show people so they wouldnt be afraid to purchase these. I would love to have them if I had the cash.

**Hart_Rod** · 01-29-2013, 10:08 AM

Thanks for the info guys. Any offers?

Tshort1 · 01-29-2013, 11:42 AM

Ok With the info above about the Heim Joints I am intrested again. I would like the Spindles and ball joints but dont need the dust sheilds. How about 275 Shipped for the ball joints and drop spindles?

**Hart_Rod** · 01-29-2013, 11:53 AM

Quote:

Originally Posted by Tshort1

Ok With the info above about the Heim Joints I am intrested again. I would like the Spindles and ball joints but dont need the dust sheilds. How about 275 Shipped for the ball joints and drop spindles?

Sounds good. PM information.

R/

**lolife99** · 02-02-2013, 12:39 PM

ttt
for a good deal,...

**Hart_Rod** · 02-02-2013, 12:42 PM

Quote:

Originally Posted by lolife99

ttt
for a good deal,...

Keith - TSHORT1 bought them, but thanks for all the information and the assist on the sale!!!

STOCKISH · 02-02-2013, 12:46 PM

Glad they sold, I was thinking about them really hard! LOL

**lolife99** · 02-02-2013, 12:48 PM

Quote:

Originally Posted by Hart_Rod

Keith - TSHORT1 bought them, but thanks for all the information and the assist on the sale!!!

Good deal.
Sorry about all the "cluttered up comments", in your thread.
I tried to get that stuff eliminated as soon as possible.

Tshort1 · 02-06-2013, 06:06 PM

Got the Spindles and ball joints today. Thanks and you did a great job packing them.

01-20-2013, 10:32 AM	#26
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: PorterBuilt ECE 2 1/2" dropped spindles I will include new left and right 63-70 upper and lower ball joints, plus nice dust shields for $315 shipped. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-23-2013 at 09:17 AM.

01-23-2013, 09:17 AM	#27
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: PorterBuilt ECE 2 1/2" dropped spindles bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-23-2013, 01:07 PM	#28
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: PorterBuilt ECE 2 1/2" dropped spindles So these wont work with stock tie rod ends? Im abit confused here... Would they fit a 69 crossmember with OEM componenets? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-23-2013, 04:02 PM	#30
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: PorterBuilt ECE 2 1/2" dropped spindles Ah, rats __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-26-2013, 11:51 AM	#32
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PorterBuilt ECE 2 1/2" dropped spindles You can buy heim joints and adjusters and use these on any truck, even without a rack and pinion steering setup. The pic is from this post. http://67-72chevytrucks.com/vboard/s...d.php?t=335328 Attached Images __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-26-2013, 04:25 PM	#34
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PorterBuilt ECE 2 1/2" dropped spindles ^^True^^ I was just trying to show people so they wouldnt be afraid to purchase these. I would love to have them if I had the cash. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

01-29-2013, 10:08 AM	#35
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: PorterBuilt ECE 2 1/2" dropped spindles Thanks for the info guys. Any offers? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-29-2013, 11:42 AM	#36
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: PorterBuilt ECE 2 1/2" dropped spindles Ok With the info above about the Heim Joints I am intrested again. I would like the Spindles and ball joints but dont need the dust sheilds. How about 275 Shipped for the ball joints and drop spindles?

02-02-2013, 12:39 PM	#38
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: PorterBuilt ECE 2 1/2" dropped spindles ttt for a good deal,... __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-02-2013, 12:46 PM	#40
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: PorterBuilt ECE 2 1/2" dropped spindles Glad they sold, I was thinking about them really hard! LOL __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

02-06-2013, 06:06 PM	#42
Tshort1 Registered User Join Date: Feb 2012 Location: Pikeville, NC Posts: 144	Re: PorterBuilt ECE 2 1/2" dropped spindles Got the Spindles and ball joints today. Thanks and you did a great job packing them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.