The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-23-2012, 04:12 PM   #1
LDO
Registered User
 
LDO's Avatar
 
Join Date: Feb 2011
Location: Senatobia, MS
Posts: 1,297
Saginaw speedo Gear

So I did all the calculatin' and figured out what driven gear i'll need matched to my tire size and gear ratio.

Really looking forward to fixing my speedo since it plays hell on my OCD.

Get the gear in and try to install....

The old gear 'bullet' is longer than the regular ones I'm used to so the gear I ordered won't work. Never even knew there were different bullet lengths..

Need a new bullet!

back to the old drawing board....
LDO is offline   Reply With Quote
Old 02-12-2013, 02:14 AM   #2
monterx7
Registered User
 
Join Date: Jan 2013
Location: lakeland, GA
Posts: 28
Re: Saginaw speedo Gear

interesting.....i am also trying to fix my speedo and when fingering my transmission it seemed the gear inside the trans is closer than where the "bullet" puts the speedometer gear(hope that makes sense).......hhhmmmm

please post your findings
monterx7 is offline   Reply With Quote
Old 02-12-2013, 08:44 AM   #3
LDO
Registered User
 
LDO's Avatar
 
Join Date: Feb 2011
Location: Senatobia, MS
Posts: 1,297
Re: Saginaw speedo Gear

Quote:
Originally Posted by monterx7 View Post
interesting.....i am also trying to fix my speedo and when fingering my transmission it seemed the gear inside the trans is closer than where the "bullet" puts the speedometer gear(hope that makes sense).......hhhmmmm

please post your findings
Good News: I had a buddy give me a gear bullet he had in his shop which fit perfectly and worked with the gear I had ordered.


Bad News: Speedo is still off from my GPS reading so it appears I would need to change the 'drive' gear which is the one on the shaft.

In your case, your drive gear may have come off the shaft and slid down. There should be a retaining ring to prevent that but you know how that goes. Are you working with a saginaw trans as well?
LDO is offline   Reply With Quote
Old 02-12-2013, 11:07 AM   #4
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
Re: Saginaw speedo Gear

Easier ways to get it right. Ratio adaptors!!
http://www.transmissioncenter.net/sp...____va.htm#350
geezer#99 is online now   Reply With Quote
Old 02-12-2013, 11:14 AM   #5
monterx7
Registered User
 
Join Date: Jan 2013
Location: lakeland, GA
Posts: 28
Re: Saginaw speedo Gear

Quote:
Originally Posted by LDO View Post
Good News: I had a buddy give me a gear bullet he had in his shop which fit perfectly and worked with the gear I had ordered.


Bad News: Speedo is still off from my GPS reading so it appears I would need to change the 'drive' gear which is the one on the shaft.

In your case, your drive gear may have come off the shaft and slid down. There should be a retaining ring to prevent that but you know how that goes. Are you working with a saginaw trans as well?
TBH i dont know....i do have 3 on the tree though
monterx7 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com