|
02-12-2013, 07:30 PM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: Where am I?
Posts: 45
|
How low to go?
Hello everyone,
I have a 72 c10 short bed and wanted to know how much of a drop I can do front and back without a c-notch etc.  I want it to feel a bit sportier and handle better than say a newer car. 
|
|
|
|
02-12-2013, 07:36 PM
|
#2 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: How low to go?
2.5/4 would be the best but will also require a rear shock relocator setup and adjustable panhard bar
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
02-12-2013, 09:52 PM
|
#3 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: How low to go?
You'll also want to add a later model 3/4 ton sway bar.You'll have to grind off the rivets holding the brackets to get them off the donor truck but everything can be bolted back on.You're probably not going to get "handle better than a newer car" but you will notice a difference.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
