started a new c30 build ( your going to love this one ) - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

farmall · 10-11-2012, 11:14 PM

I did post a pic when I first cleaned it up. I will see where it is.

farmall · 10-11-2012, 11:31 PM

http://67-72chevytrucks.com/vboard/s...=291544&page=6

Page 6 along with others throughout the thread.

http://67-72chevytrucks.com/vboard/s...=480810&page=7

Page 7

mr mike · 10-22-2012, 09:00 AM

Brakes
are not done yet but I will provide all information as we complete it.

But We did install 3 inch drop spindles.

Posted via Mobile Device

MrBeast · 10-22-2012, 10:32 AM

Sweet!

**steelhorse** · 10-22-2012, 01:18 PM

Love it.

Bert W · 10-22-2012, 02:15 PM

Love it!

OrangeCrush1970 · 11-06-2012, 02:29 PM

Mike did you do anything as far as a drop on the front? Im also looking into a c-knotch on my c30...have you found a kit or are you going to fab one up? How many leaf's did you remove from the rear on your axle flip?

Lots of questions for you, I like the project!

mr mike · 11-07-2012, 06:37 AM

We put in a 3 inch drop spindle for the front and the rear we just removed the overload spring and then move the axle On top of leaf springs and re-welded the perches on the actual itself.
My brother got a 4link kit for the truck but it wasn't very heavy duty so I think were are going to use it as a template and builder are own
Posted via Mobile Device

**67cheby** · 11-07-2012, 11:05 AM

dig the super singles !

Rusbuilt · 11-26-2012, 10:57 AM

Can I get some info on the drop spindles? Who makes them and where did you buy them? Thanks!

DUTCHMAN · 12-29-2012, 02:25 PM

any updates or pics?????

duallyjams · 12-29-2012, 09:35 PM

sweet

1972RedNeck · 12-29-2012, 10:20 PM

Quote:

Originally Posted by mr mike

Whattttttt 12v Cummings diesel

Where did you find a Cummings? They are quite a rare motor. Come to think of it, I have never even seen a Cummings.

BornTooLate · 01-22-2013, 07:07 PM

X2 on who makes one ton drop spindles?

mr mike · 02-12-2013, 06:27 AM

My bad

68Cummins · 02-12-2013, 08:32 AM

Subscribed!

Are you using the getrag 360 trans?
1pc or 2 pc drive shaft?
Have you gotten the inner cooler plumbed up or are you not running one? I an running a 2nd gen dodge IC on the outside of the core support (I hope, we will find out this weekend)

Bishops Trucks · 02-12-2013, 08:40 AM

Gotta keep an eye on this build.

mr mike · 02-13-2013, 09:49 PM

Teaser shot

Posted via Mobile Device

mr mike · 02-14-2013, 03:22 AM

Posted via Mobile Device

10-11-2012, 11:14 PM	#51
farmall Registered User Join Date: Jun 2011 Location: Central OR Posts: 732	Re: started a new c30 build ( your going to love this one ) I did post a pic when I first cleaned it up. I will see where it is. __________________ 1955 GMC 250 8 Flatbed 1971 C30 157" 350 4spd 10' Flatbed 81 GMC K30 CnC 9' Flatbed 454 T400 89 GMC Jimmy Stock https://67-72chevytrucks.com/vboard/...d.php?t=810958 71 LT1 Convertible, 72 Coupe 69 CJ5, 75 CJ6, 67 M715, 72 M35A2 Bobbed, 95 XLC2

10-11-2012, 11:31 PM	#52
farmall Registered User Join Date: Jun 2011 Location: Central OR Posts: 732	Re: started a new c30 build ( your going to love this one ) http://67-72chevytrucks.com/vboard/s...=291544&page=6 Page 6 along with others throughout the thread. http://67-72chevytrucks.com/vboard/s...=480810&page=7 Page 7 __________________ 1955 GMC 250 8 Flatbed 1971 C30 157" 350 4spd 10' Flatbed 81 GMC K30 CnC 9' Flatbed 454 T400 89 GMC Jimmy Stock https://67-72chevytrucks.com/vboard/...d.php?t=810958 71 LT1 Convertible, 72 Coupe 69 CJ5, 75 CJ6, 67 M715, 72 M35A2 Bobbed, 95 XLC2

10-22-2012, 09:00 AM	#53
mr mike Registered User Join Date: Sep 2004 Location: pa Posts: 352	Re: started a new c30 build ( your going to love this one ) Brakes are not done yet but I will provide all information as we complete it. But We did install 3 inch drop spindles. Posted via Mobile Device __________________ the truck click the link.. http://67-72chevytrucks.com/vboard/s...d.php?t=361168

10-22-2012, 10:32 AM	#54
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: started a new c30 build ( your going to love this one ) Sweet! __________________ "He used to be a pretty nice feller, now he's a welder!"

10-22-2012, 01:18 PM	#55
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: started a new c30 build ( your going to love this one ) Love it.

10-22-2012, 02:15 PM	#56
Bert W Registered User Join Date: Dec 2008 Location: Jackson, MS Posts: 373	Re: started a new c30 build ( your going to love this one ) Love it! __________________ 1968 Chevy C/10 LWB V8 1983 K5 Blazer 1989 C1500 Stepside Reg. Cab V8

11-06-2012, 02:29 PM	#57
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Re: started a new c30 build ( your going to love this one ) Mike did you do anything as far as a drop on the front? Im also looking into a c-knotch on my c30...have you found a kit or are you going to fab one up? How many leaf's did you remove from the rear on your axle flip? Lots of questions for you, I like the project! __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun

11-07-2012, 06:37 AM	#58
mr mike Registered User Join Date: Sep 2004 Location: pa Posts: 352	Re: started a new c30 build ( your going to love this one ) We put in a 3 inch drop spindle for the front and the rear we just removed the overload spring and then move the axle On top of leaf springs and re-welded the perches on the actual itself. My brother got a 4link kit for the truck but it wasn't very heavy duty so I think were are going to use it as a template and builder are own Posted via Mobile Device __________________ the truck click the link.. http://67-72chevytrucks.com/vboard/s...d.php?t=361168

11-07-2012, 11:05 AM	#59
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: started a new c30 build ( your going to love this one ) dig the super singles ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-26-2012, 10:57 AM	#60
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: started a new c30 build ( your going to love this one ) Can I get some info on the drop spindles? Who makes them and where did you buy them? Thanks! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

12-29-2012, 02:25 PM	#61
DUTCHMAN Registered User Join Date: Dec 1999 Location: the Netherlands Posts: 363	Re: started a new c30 build ( your going to love this one ) any updates or pics????? __________________ 06 BMW 330d aut touring full option 83 Jeep CJ7 360 aut sold 71 GMC Suburban 67 Chevrolet C10 stepside 54 Ford F100 sold 49 Chevrolet coe 48 Ford f6 coe Strijen the Netherlands "NO MISTAKES NO PROGRESS"

12-29-2012, 09:35 PM	#62
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: started a new c30 build ( your going to love this one ) sweet __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-22-2013, 07:07 PM	#64
BornTooLate Registered User Join Date: Jan 2013 Location: bantam ct Posts: 14	Re: started a new c30 build ( your going to love this one ) X2 on who makes one ton drop spindles? __________________ '78 El Camino SS (awaiting re-restoration after a front end collision) '87 S10 Blazer 350/th350 2" drop '74 k20 wrecker 454 SM465/205 D60 14BFF 4 wheel disc brakes 38.5 Boggers 6" lift '69 C30 292 SM465 HO72 8X8 Dump Flatbed Dually

02-12-2013, 06:27 AM	#65
mr mike Registered User Join Date: Sep 2004 Location: pa Posts: 352	Re: started a new c30 build ( your going to love this one ) My bad __________________ the truck click the link.. http://67-72chevytrucks.com/vboard/s...d.php?t=361168 Last edited by mr mike; 02-12-2013 at 06:47 AM.

02-12-2013, 08:32 AM	#66
68Cummins Registered User Join Date: Feb 2013 Location: New Whiteland Posts: 62	Re: started a new c30 build ( your going to love this one ) Subscribed! Are you using the getrag 360 trans? 1pc or 2 pc drive shaft? Have you gotten the inner cooler plumbed up or are you not running one? I an running a 2nd gen dodge IC on the outside of the core support (I hope, we will find out this weekend)



Register or Log In To remove these advertisements.

02-12-2013, 08:40 AM	#67
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,730	Re: started a new c30 build ( your going to love this one ) Gotta keep an eye on this build. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

02-13-2013, 09:49 PM	#68
mr mike Registered User Join Date: Sep 2004 Location: pa Posts: 352	Re: started a new c30 build ( your going to love this one ) Teaser shot Posted via Mobile Device __________________ the truck click the link.. http://67-72chevytrucks.com/vboard/s...d.php?t=361168

02-14-2013, 03:22 AM	#69
mr mike Registered User Join Date: Sep 2004 Location: pa Posts: 352	Re: started a new c30 build ( your going to love this one ) Posted via Mobile Device __________________ the truck click the link.. http://67-72chevytrucks.com/vboard/s...d.php?t=361168

Register or Log In To remove these advertisements.