Rear Wheel Disc Brake Brackets? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod C/10 · 12-20-2012, 08:50 PM

Who has used these?

http://www.ebay.com/itm/350462675849...84.m1439.l2649

shawno72 · 12-20-2012, 09:11 PM

Looks as though they say to use a 6 lug rotor?

Fldawg · 12-20-2012, 09:18 PM

I have used these and they worked great so far

HotRod C/10 · 12-21-2012, 08:33 PM

Quote:

Originally Posted by shawno72

Looks as though they say to use a 6 lug rotor?

They work on both Shawn. I have a set just trying to figure out the rotor as the one he suggested didnt work. I am shipping your mirror out tommorrow, been working out of town to cover a guy who left on paternal leave.

finally let me fly back on wednesday.

Quote:

Originally Posted by Fldawg

I have used these and they worked great so far

What rotor did you use, 5 lug?

shawno72 · 12-21-2012, 08:56 PM

Quote:

Originally Posted by hotrod c/10

they work on both shawn. I have a set just trying to figure out the rotor as the one he suggested didnt work. I am shipping your mirror out tommorrow, been working out of town to cover a guy who left on paternal leave.

Finally let me fly back on wednesday.

Thanks again for the mirror

What rotor did you use, 5 lug?

x2

Fldawg · 12-21-2012, 09:11 PM

Quote:

Originally Posted by HotRod C/10

They work on both Shawn. I have a set just trying to figure out the rotor as the one he suggested didnt work. I am shipping your mirror out tommorrow, been working out of town to cover a guy who left on paternal leave.

finally let me fly back on wednesday.

What rotor did you use, 5 lug?

used a 78-82 six lug 4x4 rotor, i have the number but it's in my shop some where, if you need the caliper number i have that too, one thing about using that rotor, you will either have to enlarge the hole in the rotor or turn the end of the axle down so the rotor will slide on, i turned the axle down because you change more rotors that you do axles. but i did my rear brakes for $225. not bad for piecing it together and they work great

Leftlane · 12-22-2012, 10:38 AM

If you follow that link, look under sellers other items.
He also complete kits in both 5 and 6 lug.
Brackets, calipers, rotors, hoses, pads, e-brake extensions, bolts, etc. all as a package.
I looked at this for my 2wd shortbed, and didn't think the kit prices were out of line at all.
However, putting it together for under $300 was darned good.
Posted via Mobile Device

Leftlane · 12-22-2012, 10:41 AM

If you follow that link, look under sellers other items.
He also complete kits in both 5 and 6 lug.
Brackets, calipers, rotors, hoses, pads, e-brake extensions, bolts, etc. all as a package.
I looked at this for my 2wd shortbed, and didn't think the kit prices were out of line at all.
However, putting it together for under $300 was darned good.
Posted via Mobile Device

71 super · 12-23-2012, 10:41 AM

I have his complete setup on my 68, it came with dilled and slotted rotors, calipers, hoses, intermediate cables etc. It was a very good kit, all i had to add was a diff. cover gasket, and wheel seals. It went on super easy( my 5 year old daughter helped me) and works great! I would buy it again and may for the 70.

shawno72 · 12-23-2012, 11:24 AM

Quote:

Originally Posted by Fldawg

used a 78-82 six lug 4x4 rotor, i have the number but it's in my shop some where, if you need the caliper number i have that too, one thing about using that rotor, you will either have to enlarge the hole in the rotor or turn the end of the axle down so the rotor will slide on, i turned the axle down because you change more rotors that you do axles. but i did my rear brakes for $225. not bad for piecing it together and they work great

That would be great if you could get the caliper number and rotor number as well. Thank you.
Posted via Mobile Device

Fldawg · 12-23-2012, 12:08 PM

Quote:

Originally Posted by shawno72

That would be great if you could get the caliper number and rotor number as well. Thank you.
Posted via Mobile Device

i'll get out to my shop to day and get those numbers, i know the caliper is a metric one from i think a s-10

Fldawg · 12-23-2012, 12:19 PM

Shawn, here are the rotor and caliper numbers
calipers are A-1 Cardone 18-4072 and 18-4071
raybesto's rotors SB 5977
PADS ARE RAYBESTOS PGD 154 C
raybesto brake hoses BH 36847
Hope this will help

shawno72 · 12-23-2012, 12:45 PM

That is a big help. Thank you!!
Posted via Mobile Device

**leddzepp** · 12-23-2012, 12:53 PM

Quote:

Originally Posted by 71 super

I have his complete setup on my 68, it came with dilled and slotted rotors, calipers, hoses, intermediate cables etc. It was a very good kit, all i had to add was a diff. cover gasket, and wheel seals. It went on super easy( my 5 year old daughter helped me) and works great! I would buy it again and may for the 70.

Harold- Did you have to use a disc/disc prop valve or change your master cylinder? Are you running stock (or rallye) 15" wheels with this kit? E-brake connects with no problems? Thanks for your input, I am about to pull the trigger on this setup and just wanted to ask you a couple questions.

Fldawg · 12-23-2012, 12:59 PM

Quote:

Originally Posted by shawno72

That is a big help. Thank you!!
Posted via Mobile Device

1 item i forgot to tell you those calpiers have no emergency brake

HotRod C/10 · 12-23-2012, 02:00 PM

Quote:

Originally Posted by Fldawg

Shawn, here are the rotor and caliper numbers
calipers are A-1 Cardone 18-4072 and 18-4071
raybesto's rotors SB 5977
PADS ARE RAYBESTOS PGD 154 C
raybesto brake hoses BH 36847
Hope this will help

Thats a 6 lug setup though right? Shawn arent you going to 5 lug axles?...... I bought these calipers

http://www.ebay.com/itm/330606302101...84.m1439.l2649

shawno72 · 12-23-2012, 02:19 PM

Yeah I will be doin the 5 lug rotors. May just have to buy this kit http://bit.ly/12yoIIZ

HotRod C/10 · 12-23-2012, 02:27 PM

those r the rotors I may have to order, and just ditch the search......he supplied my brackets and calipers.

HotRod C/10 · 02-14-2013, 08:34 PM

they work great!

shawno72 · 02-14-2013, 09:10 PM

good deal!!

12-20-2012, 08:50 PM	#1
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Rear Wheel Disc Brake Brackets? Who has used these? http://www.ebay.com/itm/350462675849...84.m1439.l2649 __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

12-20-2012, 09:11 PM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Rear Wheel Disc Brake Brackets? Looks as though they say to use a 6 lug rotor? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-20-2012, 09:18 PM	#3
Fldawg Registered User Join Date: Jan 2011 Location: Lynn Haven Florida Posts: 1,019	Re: Rear Wheel Disc Brake Brackets? I have used these and they worked great so far

12-22-2012, 10:38 AM	#7
Leftlane Registered User Join Date: Dec 2002 Location: St. Louis, MO Posts: 118	Re: Rear Wheel Disc Brake Brackets? If you follow that link, look under sellers other items. He also complete kits in both 5 and 6 lug. Brackets, calipers, rotors, hoses, pads, e-brake extensions, bolts, etc. all as a package. I looked at this for my 2wd shortbed, and didn't think the kit prices were out of line at all. However, putting it together for under $300 was darned good. Posted via Mobile Device __________________ 1971 C10 SWB 350/350 A/C PS PDB

12-22-2012, 10:41 AM	#8
Leftlane Registered User Join Date: Dec 2002 Location: St. Louis, MO Posts: 118	Re: Rear Wheel Disc Brake Brackets? If you follow that link, look under sellers other items. He also complete kits in both 5 and 6 lug. Brackets, calipers, rotors, hoses, pads, e-brake extensions, bolts, etc. all as a package. I looked at this for my 2wd shortbed, and didn't think the kit prices were out of line at all. However, putting it together for under $300 was darned good. Posted via Mobile Device __________________ 1971 C10 SWB 350/350 A/C PS PDB

12-23-2012, 10:41 AM	#9
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Rear Wheel Disc Brake Brackets? I have his complete setup on my 68, it came with dilled and slotted rotors, calipers, hoses, intermediate cables etc. It was a very good kit, all i had to add was a diff. cover gasket, and wheel seals. It went on super easy( my 5 year old daughter helped me) and works great! I would buy it again and may for the 70. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

12-23-2012, 12:19 PM	#12
Fldawg Registered User Join Date: Jan 2011 Location: Lynn Haven Florida Posts: 1,019	Re: Rear Wheel Disc Brake Brackets? Shawn, here are the rotor and caliper numbers calipers are A-1 Cardone 18-4072 and 18-4071 raybesto's rotors SB 5977 PADS ARE RAYBESTOS PGD 154 C raybesto brake hoses BH 36847 Hope this will help

12-23-2012, 12:45 PM	#13
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Rear Wheel Disc Brake Brackets? That is a big help. Thank you!! Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-23-2012, 02:19 PM	#17
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Rear Wheel Disc Brake Brackets? Yeah I will be doin the 5 lug rotors. May just have to buy this kit http://bit.ly/12yoIIZ __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

12-23-2012, 02:27 PM	#18
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Rear Wheel Disc Brake Brackets? those r the rotors I may have to order, and just ditch the search......he supplied my brackets and calipers. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

02-14-2013, 08:34 PM	#19
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Rear Wheel Disc Brake Brackets? they work great! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

02-14-2013, 09:10 PM	#20
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Rear Wheel Disc Brake Brackets? good deal!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.