How much do you think? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JOJABOY · 02-18-2013, 02:17 PM

No photos. But, my friend down the street has a 1972 short bed Chevy. It has a sbc 350 and 3ott. Fleetside with wood bed. The truck is completely disassembled. He has the rolling frame in his garage with the bed sitting on it. The bed sides are in need of some body work. He has an A/C cab with an uncut dash sitting on the floor. Two good doors. A bench seat and a set of buckets (both need recovering). The engine block is on an engine stand and completely disassembled.

There is absolutley no rust anywhere. None! He got the truck on a trade about 5 years back and had planned on building it out for his wife but never did. He has too many other projects. He said he would sell it to me but told me I had to make an offer.

How much does everyone think it would be worth in its condition?

**yote1234** · 02-18-2013, 03:39 PM

sorry. need pics to give my estimate. sounds nice!

67ChevyRedneck · 02-18-2013, 03:49 PM

Couple grand. Its essentially a pile of parts no matter how nice it is. You could need thousands in small missing stuff.
Posted via Mobile Device

Tinkermc · 02-18-2013, 03:51 PM

I agree with both above post no pic's pittiful, putting it together could lead to bankruptcy,just a small walk down that path. Be careful be VERY careful.

JOJABOY · 02-18-2013, 04:00 PM

I think he wants about $500. I'm not sure I am ready for a full build just yet. I'm sure it will need all the small parts and pieces. They're probably there but I would want new.

**leddzepp** · 02-18-2013, 04:02 PM

$500 is a deal.

Longhorn 70 · 02-18-2013, 04:13 PM

is the cab titled? That could make the difference between a buildable truck or pile parts.

IF you were considering this to sell on eBay or something it would definately be a deal.

67ChevyRedneck · 02-18-2013, 04:23 PM

Quote:

Originally Posted by leddzepp

$500 is a deal.

Agreed!!!
Posted via Mobile Device

Lattimer · 02-18-2013, 06:25 PM

$500 with a clean title.....go for it.

CG · 02-18-2013, 07:58 PM

If it really is the truck you describe, exactly. I think if someone paid to have it shipped to them and it was under a grand to do they would be getting a pretty decent deal still.

JOJABOY · 02-18-2013, 08:34 PM

It's just as described. Everything is there (in multiples). Just no new parts. No rust at all. He doesn't have title on cab. However, Georgia only requires a bill of sale on those years. So I can get it registered without a problem.

My only draw back is that I only have a two car garage. If I could paint the chassis and shoot the underside of cab in a flat black I could get the cab and bed on frame and start putting motor and trans in pretty quick like. Could probably get it down to one side of my garage and just put two of my cars on the street.

buckskins4ever · 02-18-2013, 10:07 PM

$500 would be a steal if it has a title. If your 2 car garage is attached please go buy about a dozen cheap filters for your furnace (I am a Master HVAC Contractor). Sanding, priming, and painting dust will suck into your furnace and clog up in just one days time.
That being said: If you have the time and will to build the truck.....DO IT!! It will give the love of these toys that someone who simply buys one off the lot cant understand.

JOJABOY · 02-18-2013, 10:11 PM

I'd want to build 454 with 5-speed short and wide. Already has wood slat fleet side. It's my dream truck. Just don't know how long I would be dedicating my garage to the build.
Posted via Mobile Device

02-18-2013, 02:17 PM	#1
JOJABOY Registered User Join Date: Sep 2012 Location: Factory Posts: 681	How much do you think? No photos. But, my friend down the street has a 1972 short bed Chevy. It has a sbc 350 and 3ott. Fleetside with wood bed. The truck is completely disassembled. He has the rolling frame in his garage with the bed sitting on it. The bed sides are in need of some body work. He has an A/C cab with an uncut dash sitting on the floor. Two good doors. A bench seat and a set of buckets (both need recovering). The engine block is on an engine stand and completely disassembled. There is absolutley no rust anywhere. None! He got the truck on a trade about 5 years back and had planned on building it out for his wife but never did. He has too many other projects. He said he would sell it to me but told me I had to make an offer. How much does everyone think it would be worth in its condition?

02-18-2013, 03:39 PM	#2
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	Re: How much do you think? sorry. need pics to give my estimate. sounds nice! __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

02-18-2013, 03:49 PM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: How much do you think? Couple grand. Its essentially a pile of parts no matter how nice it is. You could need thousands in small missing stuff. Posted via Mobile Device __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-18-2013, 03:51 PM	#4
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: How much do you think? I agree with both above post no pic's pittiful, putting it together could lead to bankruptcy,just a small walk down that path. Be careful be VERY careful.

02-18-2013, 04:00 PM	#5
JOJABOY Registered User Join Date: Sep 2012 Location: Factory Posts: 681	Re: How much do you think? I think he wants about $500. I'm not sure I am ready for a full build just yet. I'm sure it will need all the small parts and pieces. They're probably there but I would want new.

02-18-2013, 04:02 PM	#6
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,031	Re: How much do you think? $500 is a deal. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

02-18-2013, 04:13 PM	#7
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: How much do you think? is the cab titled? That could make the difference between a buildable truck or pile parts. IF you were considering this to sell on eBay or something it would definately be a deal. __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9

02-18-2013, 06:25 PM	#9
Lattimer Registered User Join Date: Jan 2013 Location: Mickleton, NJ Posts: 1,776	Re: How much do you think? $500 with a clean title.....go for it. __________________ Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881

02-18-2013, 07:58 PM	#10
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: How much do you think? If it really is the truck you describe, *exactly. I think if someone paid to have it shipped to them and it was under a grand to do they would be getting a pretty decent deal still. __________________ … … … … … … … … ... … … … … … … … … … … …*

02-18-2013, 08:34 PM	#11
JOJABOY Registered User Join Date: Sep 2012 Location: Factory Posts: 681	Re: How much do you think? It's just as described. Everything is there (in multiples). Just no new parts. No rust at all. He doesn't have title on cab. However, Georgia only requires a bill of sale on those years. So I can get it registered without a problem. My only draw back is that I only have a two car garage. If I could paint the chassis and shoot the underside of cab in a flat black I could get the cab and bed on frame and start putting motor and trans in pretty quick like. Could probably get it down to one side of my garage and just put two of my cars on the street.

02-18-2013, 10:07 PM	#12
buckskins4ever Registered User Join Date: Dec 2012 Location: Altoona Iowa Posts: 481	Re: How much do you think? $500 would be a steal if it has a title. If your 2 car garage is attached please go buy about a dozen cheap filters for your furnace (I am a Master HVAC Contractor). Sanding, priming, and painting dust will suck into your furnace and clog up in just one days time. That being said: If you have the time and will to build the truck.....DO IT!! It will give the love of these toys that someone who simply buys one off the lot cant understand.

02-18-2013, 10:11 PM	#13
JOJABOY Registered User Join Date: Sep 2012 Location: Factory Posts: 681	Re: How much do you think? I'd want to build 454 with 5-speed short and wide. Already has wood slat fleet side. It's my dream truck. Just don't know how long I would be dedicating my garage to the build. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.