|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-20-2013, 06:13 PM
|
#1 |
|
Registered User
Join Date: Jun 2009
Location: Columbus IN
Posts: 91
|
Re: 1970 GMC 5.3/4l60e swap
The pcm is shipped off to Wait4meperformance to get tuned, my racing innovation stainless headers are bought but on back order, and I have a high pressure inline fuel pump on the way. Hopefully I can get it plumbed in this weekend when I am home (going to college and can come home a few times a month to work on it).
|
|
|
|
02-20-2013, 06:15 PM
|
#2 |
|
Registered User
Join Date: Jun 2009
Location: Columbus IN
Posts: 91
|
Re: 1970 GMC 5.3/4l60e swap
I am modifying my harness myself, and I am going to move the battery to the drivers side because that is where the harness wants it and I can use the existing intake tube, plan on just adding a cone filter.
|
|
|
|
|
02-20-2013, 06:26 PM
|
#3 |
|
Registered User
Join Date: Jun 2009
Location: Columbus IN
Posts: 91
|
Re: 1970 GMC 5.3/4l60e swap
I should't have to much more to buy, other than trying to hunt down a power brake setup at a reasonable price. Attached is a spreadsheet of my cost thus far. Well I guess I can't upload spreadsheets.
engine and trans 900 Motormount bolts 5 motormounts 15 starter 35 Power steering box 50 0bd2 connector 2 intake gaskets 36 exhaust manifold bolts 3 torque converter bolt 6 headers 207 fuel pump 95 pcm tune 88 1442 |
|
|
|
|
03-17-2013, 11:46 AM
|
#4 |
|
Registered User
Join Date: Jun 2009
Location: Columbus IN
Posts: 91
|
Re: 1970 GMC 5.3/4l60e swap
I have got a lot of work done lately, I got the transmission cross member modified and got the engine wired and plumed. Brake booster in (thanks drew67) and power steering lines in. Headers in and I fired it up.
|
|
|
|
|
03-17-2013, 11:28 PM
|
#5 |
|
Registered User
Join Date: Mar 2010
Location: Red Bud, IL (Home) Newton, IL (Shop)
Posts: 301
|
Re: 1970 GMC 5.3/4l60e swap
Looking nice! Where did you get those headers? that is a GREAT price!
|
|
|
|
|
03-18-2013, 06:46 AM
|
#6 |
|
Registered User
Join Date: Jun 2009
Location: Columbus IN
Posts: 91
|
Re: 1970 GMC 5.3/4l60e swap
I got the headers from racing innovations. They are excellent quality but did not come with collectors so I have to find some 2 1/2 that are not reduced to tie in with my exhaust.
Posted via Mobile Device |
|
|
|
|
04-14-2013, 10:15 PM
|
#7 |
|
Registered User
Join Date: Jun 2009
Location: Columbus IN
Posts: 91
|
Re: 1970 GMC 5.3/4l60e swap
Got the exhaust tied in today and drove it about 125 miles with no problems. Great power and 18 mpg! I love it so far.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
