TX WTB: Bumper Bolts | 69-70 grill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Satin69 · 06-26-2012, 11:08 PM

Looking for bumper bolts for front and rear sport bumpers. Also needing a straight grill.

Thank you!
Joey

2002yanks · 06-26-2012, 11:51 PM

i have a really nice 69-70 grille.1 small dent next to pass headlight. just needs a good polish to bring it back. I am looking for $130 plus shipping for it(usually about $100 or so) just sent one to texas not to long ago.

70LonghornCST · 06-27-2012, 12:00 AM

I have a new set of front & rear bumper bolts. $20 shipped.

Satin69 · 06-27-2012, 08:56 AM

I think I am going to pass on the grill for now but I will take the bolts. Are those the bigger style that fit the holes to the frame horn?

**WIDESIDE72** · 06-27-2012, 11:48 AM

Are you needing the grill and insert or just the insert? I have a retry nice insert for sale...
Posted via Mobile Device

Satin69 · 06-27-2012, 02:02 PM

I need what is posted above. Hopefully with most/all paint on it.

Satin69 · 06-27-2012, 02:03 PM

Also Wide- Thursday is fine on the the bezels.

70LonghornCST · 06-27-2012, 06:30 PM

Quote:

Originally Posted by Satin69

I think I am going to pass on the grill for now but I will take the bolts. Are those the bigger style that fit the holes to the frame horn?

The bolts measure 1 & 1/2 inches from end to cap. It seems that that they are the smaller ones. I just compared them to my NOS set and the NOS set are 2 inches long from end to cap.

Satin69 · 06-28-2012, 12:23 PM

Are they the same diameter? Would the 1.5 inch work? Thank you.

Wideside- Do you have pictures of the insert?

70LonghornCST · 06-28-2012, 02:25 PM

Quote:

Originally Posted by Satin69

Are they the same diameter? Would the 1.5 inch work? Thank you.

Wideside- Do you have pictures of the insert?

Are you installing an aftermarket or OEM set of bumpers? I will double check how they install. I will install my bumper with them without tightening them down.

Satin69 · 06-28-2012, 04:48 PM

I am using GoodMark repop bumpers. If they snug down I will take them.

**WIDESIDE72** · 06-28-2012, 10:46 PM

I have a whole bucket of bolts from trucks I have parted out, but they are all front bumper bolts. They are used and you would have to tell me how many you need and length, size, etc. I could give you a price at that time. They are all oem but would need polishing.

70LonghornCST · 06-30-2012, 08:11 PM

Quote:

Originally Posted by Satin69

I am using GoodMark repop bumpers. If they snug down I will take them.

I just checked, they snug down fine. The OEM bolts have a thead diameter of 8/16" (1/2"), and the afftermarket ones have a have a thead size of 7/16. I had no problem installing the bumper. Let me know if you are still interested.

**PICKMUP** · 06-30-2012, 09:05 PM

This WAS a NEW GM grill, installed & run in my truck for a year. There are no dents, but there is light scratches from use. The inner is new repop & the HL bezels & bowtie are nice used...$600 + shipping.
I would want to put it in a big box with a lot of padding.

HeavyMetalChevy · 07-10-2012, 11:31 PM

Quote:

Originally Posted by PICKMUP

This WAS a NEW GM grill, installed & run in my truck for a year. There are no dents, but there is light scratches from use. The inner is new repop & the HL bezels & bowtie are nice used...$600 + shipping.
I would want to put it in a big box with a lot of padding.

Good deal IMO. !

HeavyMetalChevy · 07-19-2012, 02:10 PM

Has anyone heard from this guy. I sent out a restored console against my better judgment with only the deposit payed. I went ahead and shipped in good faith and empathetic to the fact that it did take a while to get it done. I have not heard back via email or site wise either.

tdkosta · 02-21-2013, 03:18 PM

Quote:

Originally Posted by WIDESIDE72

I have a whole bucket of bolts from trucks I have parted out, but they are all front bumper bolts. They are used and you would have to tell me how many you need and length, size, etc. I could give you a price at that time. They are all oem but would need polishing.

I bent a bumper bolt getting my old bumper off. I am also missing the the hardware to bolt up one of the sport bumper brackets to the frame. Do you still have some bolts from trucks you've parted?

**WIDESIDE72** · 02-21-2013, 09:19 PM

Sorry, no. I was actually scrounging for the carriage head stainless aloes bolts for my latest buil this afternoon. I went to Tractor Supply and bought the 1/2" bracket to frame bolts washers and nuts. Grade 8 gold irradiated were less than $10 for front and rear.
Posted via Mobile Device

**WIDESIDE72** · 02-22-2013, 09:11 AM

Quote:

Originally Posted by HeavyMetalChevy

Has anyone heard from this guy. I sent out a restored console against my better judgment with only the deposit payed. I went ahead and shipped in good faith and empathetic to the fact that it did take a while to get it done. I have not heard back via email or site wise either.

Ironic that heavymetal was looking for someone as he left a few people here out to dry himself!
Posted via Mobile Device

06-26-2012, 11:08 PM	#1
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	WTB: Bumper Bolts \| 69-70 grill Looking for bumper bolts for front and rear sport bumpers. Also needing a straight grill. Thank you! Joey __________________ 1956 GMC undergoing LS Swap

06-26-2012, 11:51 PM	#2
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: WTB: Bumper Bolts \| 69-70 grill i have a really nice 69-70 grille.1 small dent next to pass headlight. just needs a good polish to bring it back. I am looking for $130 plus shipping for it(usually about $100 or so) just sent one to texas not to long ago. __________________ My build thread!! http://67-72chevytrucks.com/vboard/s...d.php?t=474018

06-27-2012, 12:00 AM	#3
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: WTB: Bumper Bolts \| 69-70 grill I have a new set of front & rear bumper bolts. $20 shipped. Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

06-27-2012, 08:56 AM	#4
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: WTB: Bumper Bolts \| 69-70 grill I think I am going to pass on the grill for now but I will take the bolts. Are those the bigger style that fit the holes to the frame horn? __________________ 1956 GMC undergoing LS Swap

06-27-2012, 11:48 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB: Bumper Bolts \| 69-70 grill Are you needing the grill and insert or just the insert? I have a retry nice insert for sale... Posted via Mobile Device

06-27-2012, 02:02 PM	#6
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: WTB: Bumper Bolts \| 69-70 grill I need what is posted above. Hopefully with most/all paint on it. __________________ 1956 GMC undergoing LS Swap

06-27-2012, 02:03 PM	#7
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: WTB: Bumper Bolts \| 69-70 grill Also Wide- Thursday is fine on the the bezels. __________________ 1956 GMC undergoing LS Swap

06-28-2012, 12:23 PM	#9
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: WTB: Bumper Bolts \| 69-70 grill Are they the same diameter? Would the 1.5 inch work? Thank you. Wideside- Do you have pictures of the insert? __________________ 1956 GMC undergoing LS Swap

06-28-2012, 04:48 PM	#11
Satin69 Registered User Join Date: Mar 2012 Location: Gunter, TX Posts: 169	Re: WTB: Bumper Bolts \| 69-70 grill I am using GoodMark repop bumpers. If they snug down I will take them. __________________ 1956 GMC undergoing LS Swap

06-28-2012, 10:46 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB: Bumper Bolts \| 69-70 grill I have a whole bucket of bolts from trucks I have parted out, but they are all front bumper bolts. They are used and you would have to tell me how many you need and length, size, etc. I could give you a price at that time. They are all oem but would need polishing.

06-30-2012, 09:05 PM	#14
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,123	Re: WTB: Bumper Bolts \| 69-70 grill This WAS a NEW GM grill, installed & run in my truck for a year. There are no dents, but there is light scratches from use. The inner is new repop & the HL bezels & bowtie are nice used...$600 + shipping. I would want to put it in a big box with a lot of padding. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-19-2012, 02:10 PM	#16
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB: Bumper Bolts \| 69-70 grill Has anyone heard from this guy. I sent out a restored console against my better judgment with only the deposit payed. I went ahead and shipped in good faith and empathetic to the fact that it did take a while to get it done. I have not heard back via email or site wise either. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

02-21-2013, 09:19 PM	#18
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: WTB: Bumper Bolts \| 69-70 grill Sorry, no. I was actually scrounging for the carriage head stainless aloes bolts for my latest buil this afternoon. I went to Tractor Supply and bought the 1/2" bracket to frame bolts washers and nuts. Grade 8 gold irradiated were less than $10 for front and rear. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.