59 Apache power Brakes vacuum on 235

[Krimics]

I am thinking of installing power brakes to my 59 Apache and was wondering if the vacuum take off from the carb inlet manifold (used to go to the wipers I presume now blocked off) will be sufficient. I have the original 235 engine still and see no other vacuum port to connect to. Any advice would be appreciated. Thanks in advance.

[NEWFISHER]

I installed a CPP power disc kit on my 55 with a 235 and worked great!

[Krimics]

Great news but to where did you connect the vacuum?

[Gator Alum]

Welcome to the forum Krimics. I bought a new fitting for the carb and used that vacuum source for the brakes. Right now I don't have wipers as no vacuum attached. RainX works wonders and my vacuum wipers have issues anyways. Probably eventually go to power wipers. That or just put a T in the vacuum line for the wipers.
Posted via Mobile Device

[NEWFISHER]

Originally Posted by Krimics

Great news but to where did you connect the vacuum?

at the base of the intake just under the carb on the left panel there was a large plug that I unscrewed and adapted a brass nipple to supply vacuum.

[G&R's57GMC]

The square nut (pipe plug) on the side of the manifold is where you install your vac. port.

Remove the plug and replace with fitting and connect your P/B hose line.

Put a upside down U in the line at the firewall that extends at least as high as the top of the carb. This will help separate gas vapor from collecting in the P/B booster.

[Krimics]

Many thanks to you all for replying and pointing out the process I will follow.... Will take pictures when I eventually get to install then post.

Thanks again for taking the time.