Anyone recognize these wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joeydirt · 02-27-2013, 10:36 PM

Im trying to find a center cap that works with them and clears the c20 rear hub, they have no stamp on them Im thinking they were oem options
thanks

Hx16457 · 02-27-2013, 10:40 PM

You might get the tire removed and check the wheel. They have model numbers on them!
Or you could measure the inside diameter and order some that will match that dimension!
Good luck!
Posted via Mobile Device

**slepysal** · 02-28-2013, 01:16 AM

looks like a pacer 162M aluminum mod. I'm pretty sure a push through cap will work. Were are you located?

gixxer711 · 02-28-2013, 01:46 AM

def not a factory wheel. most aftermarket wheels do not have the manufacturer's name or part number on the back of the wheel and just about every wheel manufacturer has made a style similar to that over the years. looks like it should take a push thru cap like mentioned. the wheel is likely a 130mm gore which is pretty typical for 8 lug wheels. wheel stores hate screwing with center caps, so your best bet is to call around to your local wheel shops and ask for an 8 lug push thru short cap in stock, then take a wheel off your truck up there and slide the cap thru to see if it fits. i mention the short cap because you do not have a long hub that sticks thru the wheel and a long cap would look crappy.
Posted via Mobile Device

joeydirt · 02-28-2013, 07:28 AM

Well I wanted to run them on my 66c20 so there is a big ass hub in the rear

tincan1966 · 02-28-2013, 07:45 AM

there's too many lug nut holes for a C-10

joeydirt · 02-28-2013, 07:47 AM

Quote:

Originally Posted by tincan1966

there's too many lug nut holes for a C-10

There sure is I made a typo its a c20

vpersh · 02-28-2013, 11:11 AM

They look like the Outlaw II wheels I have on my truck - or a variation thereof....

I bought mine locally.

**slepysal** · 02-28-2013, 11:26 AM

Just go to your local tire/ wheel store and ask for 8 lug tall push thru caps

5.11" diameter and 6.33" tall.
I asked were you were located to see if I could recomemd a shop..... let me know

PAPA KENT · 02-28-2013, 12:06 PM

there a outlaw II design.any aftermarket cap will fit them.

02-27-2013, 10:36 PM	#1
joeydirt Registered User Join Date: Oct 2012 Location: North Virginia Posts: 149	Anyone recognize these wheels Im trying to find a center cap that works with them and clears the c20 rear hub, they have no stamp on them Im thinking they were oem options thanks Attached Images

02-27-2013, 10:40 PM	#2
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: Anyone recognize these wheels You might get the tire removed and check the wheel. They have model numbers on them! Or you could measure the inside diameter and order some that will match that dimension! Good luck! Posted via Mobile Device __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16

02-28-2013, 01:16 AM	#3
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Anyone recognize these wheels looks like a pacer 162M aluminum mod. I'm pretty sure a push through cap will work. Were are you located? __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

02-28-2013, 01:46 AM	#4
gixxer711 Registered User Join Date: May 2012 Location: Cypress, TX Posts: 163	Re: Anyone recognize these wheels def not a factory wheel. most aftermarket wheels do not have the manufacturer's name or part number on the back of the wheel and just about every wheel manufacturer has made a style similar to that over the years. looks like it should take a push thru cap like mentioned. the wheel is likely a 130mm gore which is pretty typical for 8 lug wheels. wheel stores hate screwing with center caps, so your best bet is to call around to your local wheel shops and ask for an 8 lug push thru short cap in stock, then take a wheel off your truck up there and slide the cap thru to see if it fits. i mention the short cap because you do not have a long hub that sticks thru the wheel and a long cap would look crappy. Posted via Mobile Device

02-28-2013, 07:28 AM	#5
joeydirt Registered User Join Date: Oct 2012 Location: North Virginia Posts: 149	Re: Anyone recognize these wheels Well I wanted to run them on my 66c20 so there is a big ass hub in the rear Last edited by joeydirt; 02-28-2013 at 07:47 AM. Reason: typo I own a c20

02-28-2013, 07:45 AM	#6
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: Anyone recognize these wheels there's too many lug nut holes for a C-10

02-28-2013, 11:11 AM	#8
vpersh Registered User Join Date: Mar 2001 Location: Tucson, Arizona Posts: 26	Re: Anyone recognize these wheels They look like the Outlaw II wheels I have on my truck - or a variation thereof.... I bought mine locally. __________________ Van Pershing Tucson, Arizona Idea Page

02-28-2013, 11:26 AM	#9
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Anyone recognize these wheels Just go to your local tire/ wheel store and ask for 8 lug tall push thru caps 5.11" diameter and 6.33" tall. I asked were you were located to see if I could recomemd a shop..... let me know __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

02-28-2013, 12:06 PM	#10
PAPA KENT Registered User Join Date: Nov 2010 Location: Lolo montana Posts: 361	Re: Anyone recognize these wheels there a outlaw II design.any aftermarket cap will fit them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.