The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-10-2003, 12:18 PM   #1
stan79chevy
Registered User
 
stan79chevy's Avatar
 
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
started out good then went bad

we put a new front clip on my little brothers 87 2wd this weekend. hes cheap so he bought "international harvester" red tractor paint $25 for a gallon.
to make a long terrible story short we painted it in the dark, with paint brushes, with paint that was spilled on the dirty garage floor<hes clumsy and spilled the gallon of paint 2 times>
in the morning when he bought it outside it has runs on the runs there are bare spots and spots where the paint is 1/4 in thick

hes going to come down this weekend so we can try to fix it
i'll try to get some pictures then
__________________
79 chevy k20 350/350/205/D44/14bFF
4.56 gears rock
LWB pimer black

01 S-10 ZR2 extended cab
4.3/4L60E/233
3.73 gear 31" DICK CEPEK CRUSHERS
stan79chevy is offline   Reply With Quote
Old 11-10-2003, 06:55 PM   #2
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
LOL ive had days like that but lol we had like two cases of beer at that point lol
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 11-10-2003, 07:32 PM   #3
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
Your kidding ....aren't you? I have seen trucks that I swore were painted with a dirty mop. I never knew someone that actually did it though....:p
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 11-10-2003, 08:20 PM   #4
74Pumpkin
Insert witty comment here
 
74Pumpkin's Avatar
 
Join Date: Nov 2003
Location: Lakeville Minnesota
Posts: 388
You have to post some pictures of that. I'd love to see it!
__________________
So many trucks, So little time!
74Pumpkin is offline   Reply With Quote
Old 11-10-2003, 09:28 PM   #5
phantom dually
Project92 SWB stepside
 
phantom dually's Avatar
 
Join Date: Feb 2003
Location: Louisville KY
Posts: 4,792
Nice!!!!!
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448
phantom dually is offline   Reply With Quote
Old 11-10-2003, 09:43 PM   #6
stan79chevy
Registered User
 
stan79chevy's Avatar
 
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
im not kidding i'll get proof this weekend

he lives about 100 miles away and dosent have anyone to help him up there and he has no money. were going to sand the runs down this weekend then try to repaint it in my garage where i have lights and stuff. anyone have any good painting tips or suggestions other than not to use a brush. will a wagner power sprayer work good?
__________________
79 chevy k20 350/350/205/D44/14bFF
4.56 gears rock
LWB pimer black

01 S-10 ZR2 extended cab
4.3/4L60E/233
3.73 gear 31" DICK CEPEK CRUSHERS
stan79chevy is offline   Reply With Quote
Old 11-10-2003, 09:57 PM   #7
swervin ervin
You get what you pay for
 
swervin ervin's Avatar
 
Join Date: Dec 1999
Location: Cherryville, NC
Posts: 4,798
I don't think I would have told anyone about doing something like that. Some things are better kept to yourself, you know? This might be one of them.
__________________
Mike

1985 Chevy C-10
swervin ervin is offline   Reply With Quote
Old 11-11-2003, 01:15 AM   #8
soleeagle
Registered User
 
soleeagle's Avatar
 
Join Date: Sep 2003
Location: Shelbyville, Indiana
Posts: 614
Quote:
Originally posted by swervin ervin
I don't think I would have told anyone about doing something like that. Some things are better kept to yourself, you know? This might be one of them.

I would have to agree.
__________________
Chuck

'85 Chevy Silverado 4X4
'91 Chevy 4X4 Suburban



http://www.cardomain.com/memberpage/545941
soleeagle is offline   Reply With Quote
Old 11-11-2003, 01:43 AM   #9
1FaastC10
Account Suspended
 
1FaastC10's Avatar
 
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
yes, a wagner will work. i have painted more than one car like that. and yes, quite a few of them were with house paint. derby cars dont need expensive auto paint. the wagner does give pretty good results.
1FaastC10 is offline   Reply With Quote
Old 11-11-2003, 03:02 AM   #10
loweredd
www.loweredd.com
 
loweredd's Avatar
 
Join Date: Aug 2002
Location: Struble IA
Posts: 808
oh my gosh this thread is FUNNY! My dad used a rattle can on a hood, fender, and door. 3 years later it still looks good though. The new owner finished the truck that way.
loweredd is offline   Reply With Quote
Old 11-11-2003, 02:19 PM   #11
Kenneth
Registered User
 
Join Date: Jul 2003
Location: Austin, Texas
Posts: 53
yeah, go with the Wagner. The rattle can works okay, but the spray nozel isn't so good a getting a wide even coat. If you're going to sand down to the metal I'd recommend a primer, but it sounds like you're just trying to get a covering. Also, when you spray in your garage you might want to cover or remove anything in the garage you don't want red. Spray paints tend to drift in the air, and get some masks.
good luck
Kenneth is offline   Reply With Quote
Old 11-11-2003, 04:27 PM   #12
stan79chevy
Registered User
 
stan79chevy's Avatar
 
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
hes just trying to get the truck all one color

in the spring he can go through and patch rust spots and everything.
__________________
79 chevy k20 350/350/205/D44/14bFF
4.56 gears rock
LWB pimer black

01 S-10 ZR2 extended cab
4.3/4L60E/233
3.73 gear 31" DICK CEPEK CRUSHERS
stan79chevy is offline   Reply With Quote
Old 11-11-2003, 04:31 PM   #13
stan79chevy
Registered User
 
stan79chevy's Avatar
 
Join Date: Sep 2003
Location: COVINGTON GEORGIA
Posts: 477
Quote:
Originally posted by swervin ervin
I don't think I would have told anyone about doing something like that. Some things are better kept to yourself, you know? This might be one of them.
its not my truck
__________________
79 chevy k20 350/350/205/D44/14bFF
4.56 gears rock
LWB pimer black

01 S-10 ZR2 extended cab
4.3/4L60E/233
3.73 gear 31" DICK CEPEK CRUSHERS
stan79chevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com