68-71 bbc motor mounts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alyslo · 03-03-2013, 06:20 PM

Does anyone know why these are so expensive? $200. Can i just install some small block mounts on it? $16.00
Thanks.

Tx Firefighter · 03-03-2013, 07:24 PM

Yes you can install small block rubbers on the bbc frame stands. Just use a significant washer to cover the larger hole. I used a couple of harmonic balancer washers since they're nice and thick.

I have no idea of where it is now, but somewhere in the FAQ section, I did an article on this very same issue about 8 years ago. If you have a bit of patience, it's here to read. There should be pictures in it too to clarify.
Posted via Mobile Device

Shyguy · 03-03-2013, 07:42 PM

I am using the motor mounts and towers that came with the '74 454, they worked out great with the manual transmission and headers. We did have to drill holes in the frame and cradle.

**LockDoc** · 03-03-2013, 09:31 PM

Quote:

Originally Posted by Tx Firefighter

Yes you can install small block rubbers on the bbc frame stands. Just use a significant washer to cover the larger hole. I used a couple of harmonic balancer washers since they're nice and thick.

I have no idea of where it is now, but somewhere in the FAQ section, I did an article on this very same issue about 8 years ago. If you have a bit of patience, it's here to read. There should be pictures in it too to clarify.
Posted via Mobile Device

Here is Kevins thread on the subject...

http://67-72chevytrucks.com/vboard/s...d.php?t=122645

LockDoc

**LockDoc** · 03-03-2013, 09:35 PM

-
Here is another one...

http://67-72chevytrucks.com/vboard/s...d.php?t=128765

LockDoc

alyslo · 03-04-2013, 09:46 PM

Thanks for the info and pics. I forgot to mension that mine is a 4x4. Will this concept still work?

Tx Firefighter · 03-05-2013, 08:34 AM

I can't help you on that issue. 4x4s never came with big blocks so you are going down a completely different avenue than what we were referring to.

There are a good number of guys on here who have done with big block 4x4 thing though so the answers are certainly here if you look for them.
Posted via Mobile Device

**LockDoc** · 03-05-2013, 12:51 PM

-
I can't help on that one either. That's why it is important to give all the info you can on the vehicle in the first post...

This isn't necessarily just directed toward you, this actually happens a lot.

LockDoc

Tx Firefighter · 03-05-2013, 12:55 PM

Leon, any chance we will get to see you at Pate again this year ?
Posted via Mobile Device

**LockDoc** · 03-05-2013, 02:26 PM

Quote:

Originally Posted by Tx Firefighter

Leon, any chance we will get to see you at Pate again this year ?
Posted via Mobile Device

Kevin,

I just checked with the wife and she says we have a family reunion that weekend... Bummer..

LockDoc

merlin3 · 03-05-2013, 08:20 PM

i think tx firefighter just solved a huge mystery for me.I think the p.o installed a big block on small block frame stands on my truck.I think that would explain the oil pan hitting the front crossmember and not finding headers to fit.I noticed his oil pan is way far away from the crossmember.

alyslo · 03-05-2013, 10:11 PM

I'll get the info correct next time. Thanks for your help.

03-03-2013, 06:20 PM	#1
alyslo Registered User Join Date: Aug 2012 Location: Troutdale Oregon Posts: 13	68-71 bbc motor mounts. Does anyone know why these are so expensive? $200. Can i just install some small block mounts on it? $16.00 Thanks.

03-03-2013, 07:24 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 68-71 bbc motor mounts. Yes you can install small block rubbers on the bbc frame stands. Just use a significant washer to cover the larger hole. I used a couple of harmonic balancer washers since they're nice and thick. I have no idea of where it is now, but somewhere in the FAQ section, I did an article on this very same issue about 8 years ago. If you have a bit of patience, it's here to read. There should be pictures in it too to clarify. Posted via Mobile Device

03-03-2013, 07:42 PM	#3
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: 68-71 bbc motor mounts. I am using the motor mounts and towers that came with the '74 454, they worked out great with the manual transmission and headers. We did have to drill holes in the frame and cradle. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

03-03-2013, 09:35 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: 68-71 bbc motor mounts. - Here is another one... http://67-72chevytrucks.com/vboard/s...d.php?t=128765 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-04-2013, 09:46 PM	#6
alyslo Registered User Join Date: Aug 2012 Location: Troutdale Oregon Posts: 13	Re: 68-71 bbc motor mounts. Thanks for the info and pics. I forgot to mension that mine is a 4x4. Will this concept still work?

03-05-2013, 08:34 AM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 68-71 bbc motor mounts. I can't help you on that issue. 4x4s never came with big blocks so you are going down a completely different avenue than what we were referring to. There are a good number of guys on here who have done with big block 4x4 thing though so the answers are certainly here if you look for them. Posted via Mobile Device

03-05-2013, 12:51 PM	#8
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: 68-71 bbc motor mounts. - I can't help on that one either. That's why it is important to give all the info you can on the vehicle in the first post... This isn't necessarily just directed toward you, this actually happens a lot. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

03-05-2013, 12:55 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 68-71 bbc motor mounts. Leon, any chance we will get to see you at Pate again this year ? Posted via Mobile Device

03-05-2013, 08:20 PM	#11
merlin3 Registered User Join Date: Aug 2012 Location: nantucket,ma Posts: 230	Re: 68-71 bbc motor mounts. i think tx firefighter just solved a huge mystery for me.I think the p.o installed a big block on small block frame stands on my truck.I think that would explain the oil pan hitting the front crossmember and not finding headers to fit.I noticed his oil pan is way far away from the crossmember.

03-05-2013, 10:11 PM	#12
alyslo Registered User Join Date: Aug 2012 Location: Troutdale Oregon Posts: 13	Re: 68-71 bbc motor mounts. I'll get the info correct next time. Thanks for your help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.