Need pics and help dropping the suspension on my truck. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bearcamp · 03-06-2013, 08:15 PM

I have a 63 and already has 1 1/2 coild cut from the front springs. This weekend I plan on installing 2 1/2 inch drop spindles and would like to see some with the coils and spindles done so I can see if it's too much. Also 2 inch blocks in the rear. Or if you have yours done like this and no pics let me know how you made out with the drop.

**Clyde65** · 03-06-2013, 08:39 PM

I think that 1.5 coils cut with 2 1/2" drop spindles might be too much, I was thinking cut springs at 1.5" was around 3" drop
Posted via Mobile Device

61_FL_Apache · 03-06-2013, 08:56 PM

Cut coils are about the roughest ride you can get.. I would consider stock springs and drop spindles.. It will probably keep you where you are, but the ride will be better.

I cut coils on my 65 stepper and it rode terribble. I ended up baggin it instead then it rode like a Caddy.. No drop spindles on that truck.

03-06-2013, 08:15 PM	#1
Bearcamp Registered User Join Date: Nov 2012 Location: Catawissa ,PA Posts: 103	Need pics and help dropping the suspension on my truck. I have a 63 and already has 1 1/2 coild cut from the front springs. This weekend I plan on installing 2 1/2 inch drop spindles and would like to see some with the coils and spindles done so I can see if it's too much. Also 2 inch blocks in the rear. Or if you have yours done like this and no pics let me know how you made out with the drop.

03-06-2013, 08:39 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,540	Re: Need pics and help dropping the suspension on my truck. I think that 1.5 coils cut with 2 1/2" drop spindles might be too much, I was thinking cut springs at 1.5" was around 3" drop Posted via Mobile Device __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

03-06-2013, 08:56 PM	#3
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Need pics and help dropping the suspension on my truck. Cut coils are about the roughest ride you can get.. I would consider stock springs and drop spindles.. It will probably keep you where you are, but the ride will be better. I cut coils on my 65 stepper and it rode terribble. I ended up baggin it instead then it rode like a Caddy.. No drop spindles on that truck. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.