Pics Request For Cowl Hoods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*low&slow* · 03-03-2013, 02:08 AM

Getting ready to buy a induction scoop to put on my hood. Not sure what height I want it to be.

If anyone has a cowl induction hood between 2 inches tall and 6 inches tall or taller, please post your pictures and please state how tall it is.

Thanks all.

PS: The truck I am building is going to be Pro-Street/Drag Race. The body is going to be built to have a very aggressive pro-street look to it. The chassis, suspension, and powertrain/engine is going to be built for racing.

This is going to be a custom one off build. When I start ordering parts and actually building the truck, I will comment on this thread to let you all know when I will start a build thread.

Anyways, pictures of your cowl hoods would be great. Thanks again and good day to all.

Jarwood · 03-03-2013, 02:50 AM

Here is mine.

Fldawg · 03-03-2013, 09:25 AM

here's mine it's 2"

**Cash3481** · 03-03-2013, 09:56 AM

Low&slow:
Member hillijob did a cowl hood from a standard hood a while back, if you want some ideas. It turned out nice!
http://67-72chevytrucks.com/vboard/s...hlight=Hilljob

Mike
Posted via Mobile Device

Rastis · 03-03-2013, 09:59 AM

Here are come pics of when we pulled it off the trailer after paint last fall. Paint is HOK Lilac Pearl over black and the cowl is done with HOK marblizer over black. Cowl is a 2".

mixermike · 03-03-2013, 10:43 AM

Posted via Mobile Device
Posted via Mobile Device

Tinkermc · 03-03-2013, 01:09 PM

With the shape of the dash these trucks will support a 4" cowl with out sacrificing the view.

Hotrob72 · 03-03-2013, 03:00 PM

Here is a steel goodmark, fits great.

Shyguy · 03-03-2013, 04:14 PM

Here are pictures of a 2" cowl hood on my '67 I got from LMC.

*low&slow* · 03-04-2013, 12:26 AM

Quote:

Originally Posted by Rastis

Here are come pics of when we pulled it off the trailer after paint last fall. Paint is HOK Lilac Pearl over black and the cowl is done with HOK marblizer over black. Cowl is a 2".

That's a sweet truck. If you don't mind me asking, What are the specs on that chop?

And thanks all for the pictures. All of your trucks look great. Seems like a lot of people go with a 2 inch more than any other sizes available. I've decided that a 2" isn't the look I'm going for. So I will be getting one a bit taller OR I may just make my own.

Rastis · 03-04-2013, 07:58 AM

We did a 4" chop and 4" channel. I can get more detailed pictures if you're interested. Some of the other details are a fuel injected 283, T5 5 speed, trussed ford 9 inch. The step side bed should be going on in a couple of weeks.
Posted via Mobile Device

BADPURPLE70CHEVY · 03-04-2013, 08:22 AM

here you go

*low&slow* · 03-05-2013, 01:39 AM

Quote:

Originally Posted by Rastis

We did a 4" chop and 4" channel. I can get more detailed pictures if you're interested. Some of the other details are a fuel injected 283, T5 5 speed, trussed ford 9 inch. The step side bed should be going on in a couple of weeks.
Posted via Mobile Device

I'm defiantly interested in more detailed pictures. I plan on doing a chop in the near future as well and trying to figure out how much I want to cut out.

Also for everyone else, if you have pictures of any cowl hoods on these years of trucks with taller than a 2 inch cowl, please post some pictures.

Thanks and good day to all.

xman · 03-05-2013, 09:34 AM

My wifes 72 has a Harwood fiberglass hood I think it is a 6" cowl but I could be wrong

50mercfan · 03-05-2013, 02:56 PM

i looked at everything you could buy, i didn't like any of them. so, i made this one. i put the factory ridge down the middle and onto the front of then hood like factory. i added 70 chevelle cowl induction emblems to the side. what i tried to do is make it so that it would looks like chevrolet did it.

*low&slow* · 03-09-2013, 07:52 PM

xman - Can you some how confirm that is a 6 inch cowl? It looks more like a 2-2 1/2 inch. Good looking truck though.

50mercfan - That's a great looking cowl you got. Do you have any pics of how you made it?

Sideways · 03-09-2013, 08:07 PM

Quote:

Originally Posted by Rastis

Here are come pics of when we pulled it off the trailer after paint last fall. Paint is HOK Lilac Pearl over black and the cowl is done with HOK marblizer over black. Cowl is a 2".

Cool truck,I'm diggin the color.

xman · 03-11-2013, 08:22 AM

low&slow
I measured the hood this weedend and my mistake it is a 4" fiberglass cowl hood as it is taller then the the 2" steel cowl hood on my 72 burb sorry didnt get any picks of me measuring it

03-03-2013, 02:08 AM	#1
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Pics Request For Cowl Hoods Getting ready to buy a induction scoop to put on my hood. Not sure what height I want it to be. If anyone has a cowl induction hood between 2 inches tall and 6 inches tall or taller, please post your pictures and please state how tall it is. Thanks all. PS: The truck I am building is going to be Pro-Street/Drag Race. The body is going to be built to have a very aggressive pro-street look to it. The chassis, suspension, and powertrain/engine is going to be built for racing. This is going to be a custom one off build. When I start ordering parts and actually building the truck, I will comment on this thread to let you all know when I will start a build thread. Anyways, pictures of your cowl hoods would be great. Thanks again and good day to all.

03-03-2013, 02:50 AM	#2
Jarwood Registered User Join Date: Oct 2011 Location: Jefferson, Georgia Posts: 248	Re: Pics Request For Cowl Hoods Here is mine. Attached Images

03-03-2013, 09:25 AM	#3
Fldawg Registered User Join Date: Jan 2011 Location: Lynn Haven Florida Posts: 1,019	Re: Pics Request For Cowl Hoods here's mine it's 2" Attached Images

03-03-2013, 09:56 AM	#4
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Pics Request For Cowl Hoods Low&slow: Member hillijob did a cowl hood from a standard hood a while back, if you want some ideas. It turned out nice! http://67-72chevytrucks.com/vboard/s...hlight=Hilljob Mike Posted via Mobile Device Last edited by Cash3481; 03-03-2013 at 08:08 PM.

03-03-2013, 09:59 AM	#5
Rastis Registered User Join Date: Jan 2013 Location: MA Posts: 12	Re: Pics Request For Cowl Hoods Here are come pics of when we pulled it off the trailer after paint last fall. Paint is HOK Lilac Pearl over black and the cowl is done with HOK marblizer over black. Cowl is a 2". Attached Images

03-03-2013, 10:43 AM	#6
mixermike Registered User Join Date: Jan 2008 Location: Post Falls, Idaho Posts: 606	Re: Pics Request For Cowl Hoods Posted via Mobile Device Posted via Mobile Device

03-03-2013, 01:09 PM	#7
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Pics Request For Cowl Hoods With the shape of the dash these trucks will support a 4" cowl with out sacrificing the view.

03-03-2013, 03:00 PM	#8
Hotrob72 Registered User Join Date: Feb 2012 Location: Bend Oregon Posts: 188	Re: Pics Request For Cowl Hoods Here is a steel goodmark, fits great. Attached Images __________________ 1971 chevy c10 ECE 4.5/6 dropped 1970 suburban ECE 4/6 Dropped 45K original miles so far 1948 Ford Sedan 1941 Dodge COE 1932 ford roadster the rest are normal drivers

03-03-2013, 04:14 PM	#9
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: Pics Request For Cowl Hoods Here are pictures of a 2" cowl hood on my '67 I got from LMC. Attached Images __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

03-04-2013, 07:58 AM	#11
Rastis Registered User Join Date: Jan 2013 Location: MA Posts: 12	Re: Pics Request For Cowl Hoods We did a 4" chop and 4" channel. I can get more detailed pictures if you're interested. Some of the other details are a fuel injected 283, T5 5 speed, trussed ford 9 inch. The step side bed should be going on in a couple of weeks. Posted via Mobile Device

03-04-2013, 08:22 AM	#12
BADPURPLE70CHEVY 406 Powered Join Date: Aug 2009 Location: waynesville,n.c. Posts: 877	Re: Pics Request For Cowl Hoods here you go Attached Images __________________ 70 GMC 68 c10 2002 silverado 72 4x4

03-05-2013, 09:34 AM	#14
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Pics Request For Cowl Hoods My wifes 72 has a Harwood fiberglass hood I think it is a 6" cowl but I could be wrong Attached Images

03-05-2013, 02:56 PM	#15
50mercfan Registered User Join Date: Feb 2006 Location: henderson ky Posts: 196	Re: Pics Request For Cowl Hoods i looked at everything you could buy, i didn't like any of them. so, i made this one. i put the factory ridge down the middle and onto the front of then hood like factory. i added 70 chevelle cowl induction emblems to the side. what i tried to do is make it so that it would looks like chevrolet did it. Attached Images

03-09-2013, 07:52 PM	#16
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: Pics Request For Cowl Hoods xman - Can you some how confirm that is a 6 inch cowl? It looks more like a 2-2 1/2 inch. Good looking truck though. 50mercfan - That's a great looking cowl you got. Do you have any pics of how you made it?

03-11-2013, 08:22 AM	#18
xman Registered User Join Date: Mar 2009 Location: Channahon, IL Posts: 198	Re: Pics Request For Cowl Hoods low&slow I measured the hood this weedend and my mistake it is a 4" fiberglass cowl hood as it is taller then the the 2" steel cowl hood on my 72 burb sorry didnt get any picks of me measuring it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.