|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-09-2003, 05:03 PM
|
#1 |
|
creator of kong
Join Date: Mar 2001
Location: Kentucky
Posts: 538
|
Hey guys, what might my trck be worth?
It is an 86 Chevy 1/2 ton...........I'm 2nd owner and have done the following:
369 small block Chevy-4 bolt main with steel billet main caps-Eagle 4340 3.625 stroke crank-Eagle 6.125 I beam rods-JE forged flat top pistons with 1/16-1/16-3/16 speed pro rings-Melling high volume oil pump-all Clevite bearings-ARP bolts throughout-Dart Iron Eagle 180cc heads w/SS 2.02/1.60 valves-guide plates and screw in studs-Comp Cams 270 Xtreme 4x4 cam and lifters-1.6/1.5 full roller rocker arms-Edelbrock Air Gap intake and 750 CFM Holley vac. secondary carb.-GM HEI distributor-Heddman coated headers-TCI mini starter-assembly is fully balanced. TCI 700R4 transmission with Saturday Night Special stall convertor and TCI cooler behind grille with stainless braided lines. SkyJacker 2 inch suspension lift and Rancho shocks General 33x12.50x15 tires and Weld Super Single wheels (5 of them) Interior is nice with new GM dash pad and door panels, although they have been dyed, since they only come in gray around here. Have Autometer tach and gauges on and under dash. Grant steering wheel-stock AM-FM stereo with Alpine and Kicker speakers. Body is pretty nice considering the year-inside of bed is just about perfect-has some rust on inner fenders and cab corners.Other than that, not bad at all. Have new windshield weatherstripping and chrome for it, but not installed. I know I am forgetting something, because I have invested over $11,000 in this thing..........just turned 100,000 miles on the body, but the engine, tarnny, wheels and tires only have about 1,000 miles on them.......Thanks for looking, Brad |
|
|
|
11-09-2003, 05:04 PM
|
#2 |
|
creator of kong
Join Date: Mar 2001
Location: Kentucky
Posts: 538
|
..
|
|
|
|
|
11-09-2003, 05:06 PM
|
#3 |
|
creator of kong
Join Date: Mar 2001
Location: Kentucky
Posts: 538
|
...
|
|
|
|
|
11-09-2003, 05:07 PM
|
#4 |
|
creator of kong
Join Date: Mar 2001
Location: Kentucky
Posts: 538
|
....
|
|
|
|
|
11-09-2003, 05:23 PM
|
#5 |
|
creator of kong
Join Date: Mar 2001
Location: Kentucky
Posts: 538
|
...
|
|
|
|
|
11-09-2003, 06:39 PM
|
#6 |
|
Registered User
Join Date: Nov 2003
Location: Pillager,MN
Posts: 181
|
you did very good job on your pickup it very nice truck..
nada valve showed 2,700 to 3,800 but.. your truck total everything new like brand new i would say 12,000 for truck... beacuse lots people buy 1988 to 1993 used with high mile in my area for 10.000 to 14,000 but your is 86 and totally everything new.. would go 12,000 i am sure people would love to buy if it sell in my area.. beacuse it very hard to find rustfree pickup with 4 wheel in my area... that why price will go up.. Andy.. |
|
|
|
|
11-13-2003, 12:43 AM
|
#7 |
|
Registered User
Join Date: Sep 2003
Posts: 105
|
I think around our(northeast) area that truck would bring 5500-7500 as long as there is no rust what so ever. 95 4x4 2500s are only 3500-6000 with 100,000 + miles. Nice looking truck. What wheels? You might think about pullin the motor and replacing it with a good stocker. You wont get much more for it with all the goodies you did so may as well keep the expensive part. Just my .02 cents worth buying these a lot . Good luck
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
