AL WANTED: 402 BB pullys and AC / PS parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GMCNUT** · 03-16-2013, 07:00 PM

Hey guys - hope someone can assist me here - just bought my first 69-72 truck and its a 1970 CST w/ 402 engine, but someone robbed all the important stuff off the motor - I need to locate the following

1) Rt hand exhaust manifold

2) A/C compressor brackets

3) A/C engine pullys - water pump and crank

4) power steering pump and brackets

All for short water pump. They took the water pump too

Please email me at oldtrucks@charter.net any pictures and prices - I appreciate it!!

teeitup · 03-16-2013, 07:41 PM

I have a complete Power steeringp set up and a partial set of AC brackets I will look for other stuff tonight
Posted via Mobile Device

**GMCNUT** · 03-17-2013, 01:08 AM

Cool - sent you a PM on the PS stuff for sure....will probably want the A/C brackets too

**Cash3481** · 03-17-2013, 09:03 AM

I have a manifold but need to check the year (I think it's a smog manifold).
I have 2 sets of wp/crank pulleys but I need to check the part numbers to ensure they are the correct year as well.
Mike
Posted via Mobile Device

teeitup · 03-17-2013, 11:13 AM

All I have are complete PS setup and 3 of the AC brackets. I will get pics later today, sorry for delay I have a guy coming over to help me build my garage today so I will be out there most the day. Thanks Randy

KrazyRay · 03-17-2013, 01:33 PM

I have a complete set of ac brackets for $200 shipped if Randy can't help you with them.
Thanks,
Ray

teeitup · 03-17-2013, 08:03 PM

Here is the PS setup $135 shipped it. If I were you thats a great deal Ray is giving you, I'd buy his brackets. Thanks Randy

teeitup · 03-17-2013, 08:04 PM

Here are the only 4 BB AC brackets I have

teeitup · 03-20-2013, 10:13 PM

ttt

03-16-2013, 07:00 PM	#1
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	WANTED: 402 BB pullys and AC / PS parts Hey guys - hope someone can assist me here - just bought my first 69-72 truck and its a 1970 CST w/ 402 engine, but someone robbed all the important stuff off the motor - I need to locate the following 1) Rt hand exhaust manifold 2) A/C compressor brackets 3) A/C engine pullys - water pump and crank 4) power steering pump and brackets All for short water pump. They took the water pump too Please email me at oldtrucks@charter.net any pictures and prices - I appreciate it!!

03-16-2013, 07:41 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: WANTED: 402 BB pullys and AC / PS parts I have a complete Power steeringp set up and a partial set of AC brackets I will look for other stuff tonight Posted via Mobile Device __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-17-2013, 01:08 AM	#3
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: WANTED: 402 BB pullys and AC / PS parts Cool - sent you a PM on the PS stuff for sure....will probably want the A/C brackets too

03-17-2013, 09:03 AM	#4
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: WANTED: 402 BB pullys and AC / PS parts I have a manifold but need to check the year (I think it's a smog manifold). I have 2 sets of wp/crank pulleys but I need to check the part numbers to ensure they are the correct year as well. Mike Posted via Mobile Device

03-17-2013, 11:13 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: WANTED: 402 BB pullys and AC / PS parts All I have are complete PS setup and 3 of the AC brackets. I will get pics later today, sorry for delay I have a guy coming over to help me build my garage today so I will be out there most the day. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-17-2013, 01:33 PM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WANTED: 402 BB pullys and AC / PS parts I have a complete set of ac brackets for $200 shipped if Randy can't help you with them. Thanks, Ray

03-17-2013, 08:03 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: WANTED: 402 BB pullys and AC / PS parts Here is the PS setup $135 shipped it. If I were you thats a great deal Ray is giving you, I'd buy his brackets. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-17-2013, 08:04 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: WANTED: 402 BB pullys and AC / PS parts Here are the only 4 BB AC brackets I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-20-2013, 10:13 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: WANTED: 402 BB pullys and AC / PS parts ttt __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.