Any way to get the rear of my truck down 1-2" more?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe69C10 · 03-22-2013, 10:48 AM

I just did 2.5" drop spindles & 2" lowering springs up front and shes sitting nice and low now.

The rear was already lowered a little when I got it by removing a leaf from the springs. That was definitely not enough, so I just installed 2" drop lowering shackles. Still not low enough, looks good and i like having a little rake to the stance. But another 1"-2" would be perfect. Any suggestions? I would rather not replace the springs and do a flip kit.

Are there lowering blocks?

f.monroe · 03-22-2013, 11:01 AM

Drop hangers for the front of the rear leaf springs will drop it another 2".
Frank

Joe69C10 · 03-22-2013, 11:13 AM

Excellent! That should be perfect. If it ends up being too low I can adjust my shackes to the 1 inch bolt to bring it up a little. For some reason I didnt think about hangers..Thanks.

riz · 03-22-2013, 11:59 AM

drop hangers are by far the easiest way for you.

RIZ

INSIDIOUS '86 · 03-22-2013, 01:46 PM

So your 4.5 up front and about three in back I assume?
Posted via Mobile Device

03-22-2013, 10:48 AM	#1
Joe69C10 Registered User Join Date: Jul 2012 Location: Ocala,FL Posts: 128	Any way to get the rear of my truck down 1-2" more?? I just did 2.5" drop spindles & 2" lowering springs up front and shes sitting nice and low now. The rear was already lowered a little when I got it by removing a leaf from the springs. That was definitely not enough, so I just installed 2" drop lowering shackles. Still not low enough, looks good and i like having a little rake to the stance. But another 1"-2" would be perfect. Any suggestions? I would rather not replace the springs and do a flip kit. Are there lowering blocks?

03-22-2013, 11:01 AM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Any way to get the rear of my truck down 1-2" more?? Drop hangers for the front of the rear leaf springs will drop it another 2". Frank __________________ Born and proudly residing in a Red State !

03-22-2013, 11:13 AM	#3
Joe69C10 Registered User Join Date: Jul 2012 Location: Ocala,FL Posts: 128	Re: Any way to get the rear of my truck down 1-2" more?? Excellent! That should be perfect. If it ends up being too low I can adjust my shackes to the 1 inch bolt to bring it up a little. For some reason I didnt think about hangers..Thanks.

03-22-2013, 11:59 AM	#4
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: Any way to get the rear of my truck down 1-2" more?? drop hangers are by far the easiest way for you. RIZ

03-22-2013, 01:46 PM	#5
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Any way to get the rear of my truck down 1-2" more?? So your 4.5 up front and about three in back I assume? Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.