TX SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Carb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 03-09-2013, 02:29 AM

Milodon windage tray and ARP main studs for 2 bolt main block $60
Gear reduction mini starter, nearly new, spun the motor over fast and was a lot easier to fit with headers $75
Edelbrock Performer RPM Air Gap intake manifold. Looks new, no cracks or stripped holes, very clean sold locally
Carter 625 cfm carburetor with electric choke $100

$300 for all of it.

All prices include shipping to the lower 48 states. Please reply in the thread only, no PM's. I accept money orders and Paypal. If paying with Paypal, please send as a gift or otherwise cover the Paypal fees. I ship every Friday, so please be patient.

**tll74** · 03-09-2013, 03:05 AM

Pics of the windage tray and stud kit? New or Used?

**WIDESIDE72** · 03-09-2013, 03:20 AM

Quote:

Originally Posted by tll74

Pics of the windage tray and stud kit? New or Used?

Both are used low mileage. Photos in the am
Posted via Mobile Device

HotRod C/10 · 03-09-2013, 11:05 AM

Whats the model # on the starter?
Posted via Mobile Device

**WIDESIDE72** · 03-09-2013, 12:47 PM

Quote:

Originally Posted by HotRod C/10

Whats the model # on the starter?
Posted via Mobile Device

No markings on starter. I misplaced the paperwork. It is for a 168 tooth flywheel.

**WIDESIDE72** · 03-09-2013, 12:50 PM

I have edited the ad to reflect the fact that I am selling the main studs and windage tray together

HotRod C/10 · 03-09-2013, 01:27 PM

Quote:

No markings on starter. I misplaced the paperwork. It is for a 168 tooth flywheel.

GM, Autozone, oreilleys?

**WIDESIDE72** · 03-09-2013, 01:37 PM

Quote:

Originally Posted by HotRod C/10

GM, Autozone, oreilleys?

eBay
Posted via Mobile Device

**tll74** · 03-09-2013, 04:10 PM

Thank you for the pics, Im looking for a different style. Thanks, Tom

HotRod C/10 · 03-09-2013, 06:10 PM

Quote:

Originally Posted by WIDESIDE72

eBay
Posted via Mobile Device

like the sharks would say........"and for that reason I'm out......

.........good luck with the sale.

**WIDESIDE72** · 03-09-2013, 07:10 PM

Quote:

Originally Posted by HotRod C/10

like the sharks would say........"and for that reason I'm out......

.........good luck with the sale.

Not sure what that is allowed to mean... I ran this starter for several years with no issues. It spun a 383 with nearly 12:1 compression over without hesitation.
Posted via Mobile Device

HotRod C/10 · 03-09-2013, 08:22 PM

Just never had much luck with ebay electronical stuff myself.......doesn't mean its bad though, how many years is several?
Posted via Mobile Device

**WIDESIDE72** · 03-09-2013, 09:42 PM

Quote:

Originally Posted by HotRod C/10

Just never had much luck with ebay electronical stuff myself.......doesn't mean its bad though, how many years is several?
Posted via Mobile Device

3 yrs or so, but the car wasn't a daily driver I replaced a standard auto parts store new starter listed for a 79 Malibu with a 350 that wouldn't turn the car over after the car got up to temp during the summer and never had any
Problems afterward.

**WIDESIDE72** · 03-13-2013, 10:52 PM

Offers?
Posted via Mobile Device

hotstuff · 03-21-2013, 08:26 PM

Whats the carburetor number? I am interested

**WIDESIDE72** · 03-21-2013, 09:12 PM

Quote:

Originally Posted by hotstuff

Whats the carburetor number? I am interested

I will check tomorrow
Posted via Mobile Device

**WIDESIDE72** · 03-23-2013, 03:33 AM

Quote:

Originally Posted by WIDESIDE72

I will check tomorrow
Posted via Mobile Device

9635SA 0953
Posted via Mobile Device

**WIDESIDE72** · 03-23-2013, 03:41 AM

The carb is a 625 cfm
Posted via Mobile Device

03-09-2013, 02:29 AM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Carb Milodon windage tray and ARP main studs for 2 bolt main block $60 Gear reduction mini starter, nearly new, spun the motor over fast and was a lot easier to fit with headers $75 Edelbrock Performer RPM Air Gap intake manifold. Looks new, no cracks or stripped holes, very clean sold locally Carter 625 cfm carburetor with electric choke $100 $300 for all of it. All prices include shipping to the lower 48 states. Please reply in the thread only, no PM's. I accept money orders and Paypal. If paying with Paypal, please send as a gift or otherwise cover the Paypal fees. I ship every Friday, so please be patient. Attached Images Last edited by WIDESIDE72; 03-23-2013 at 03:40 AM.

03-09-2013, 03:05 AM	#2
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Pics of the windage tray and stud kit? New or Used? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-09-2013, 11:05 AM	#4
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Whats the model # on the starter? Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

03-09-2013, 12:50 PM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter I have edited the ad to reflect the fact that I am selling the main studs and windage tray together Attached Images

03-09-2013, 04:10 PM	#9
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Thank you for the pics, Im looking for a different style. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

03-09-2013, 08:22 PM	#12
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Just never had much luck with ebay electronical stuff myself.......doesn't mean its bad though, how many years is several? Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

03-13-2013, 10:52 PM	#14
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Offers? Posted via Mobile Device

03-21-2013, 08:26 PM	#15
hotstuff Registered User Join Date: Mar 2013 Location: constantine,Mi. Posts: 93	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter Whats the carburetor number? I am interested

03-23-2013, 03:41 AM	#18
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: SBC windage tray, main studs, Edelbrock RPM AIr Gap intake, mini starter, Carter The carb is a 625 cfm Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.