AL Fat Motor Parts and Turbo 400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 02-26-2013, 12:59 AM

I had a friend build a mild 454 for my son's truck and I only got about 4 or 5 hundred miles out of it and spun a rod bearing. I am thinking about going LS and Od so I have a ton of stuff to sell. I have coated hooker headers, tubular motor mounts, stock bore 454 block, fresh 782 heads, performer rpm intake, cam and lifters, springs on heads setup for this cam. built turbo 400 with upgraded sprag and a Ptc Stall converter. Deep Aluminum Pan.

All parts are in this build thread http://67-72chevytrucks.com/vboard/s...d.php?t=388019

djracer · 02-26-2013, 01:00 AM

I would be interested in partial trades for ls motor and od stuff.

**thelonerife** · 02-26-2013, 02:11 AM

prices on heads,intake,cam,lifters

Critterman71 · 02-26-2013, 08:18 AM

Im interested in the headers pics and a price?

mightymouse · 02-26-2013, 08:36 AM

im interested in the tubular motor mounts

jw

**w314speed** · 02-26-2013, 09:27 AM

interested in 454 block (4 bolt main?), headers and heads w/pics and detailed description. thanks, dan

MadnessBigBlock · 02-26-2013, 10:51 AM

Whats the stall rating on the torque converter?
Posted via Mobile Device

**68350** · 02-26-2013, 03:36 PM

Interested in headers
Posted via Mobile Device

djracer · 03-17-2013, 10:42 PM

Sorry this post slipped through the cracks. I will honor the order of post on this thread. I made a shop clean out post with prices on all.
Posted via Mobile Device

J kippin · 03-18-2013, 10:13 AM

I would be interested in the brackets for the accessories if you would sell them.

Critterman71 · 03-18-2013, 12:25 PM

I am still interested in the headers as I was in line post #4.

ecgate · 03-18-2013, 06:16 PM

Please put me in line for the headers.

Critterman71 · 03-18-2013, 06:58 PM

Wish I could have gotten home earlier to see the new parts post made for all of the parts. headers are sold so much for honoring this post order of interest.

djracer · 03-18-2013, 08:07 PM

Critterman the headers are your if you want them.
Posted via Mobile Device

djracer · 03-18-2013, 08:08 PM

Quote:

Originally Posted by mightymouse

im interested in the tubular motor mounts

jw

They are yours if you want them. 75.00 shipped to the lower 48
Posted via Mobile Device

mightymouse · 03-18-2013, 08:14 PM

Quote:

Originally Posted by djracer

They are yours if you want them. 75.00 shipped to the lower 48
Posted via Mobile Device

im going to pass on the mount,s thank,s ..jw

djracer · 03-18-2013, 08:16 PM

Quote:

Originally Posted by J kippin

I would be interested in the brackets for the accessories if you would sell them.

Just Brkts or Brkts and pulleys?
Posted via Mobile Device

the_69_C10 · 03-18-2013, 10:30 PM

You have a 400 tranny? If so, I would be like to know if you're selling your 32-spline yolk.

djracer · 03-18-2013, 11:15 PM

I need to find out what kind of yolk I will need for a 4l80.
Posted via Mobile Device

ztk123 · 03-20-2013, 05:08 PM

I know I'm down the line a way, but very interested in the headers, intake, carb, valve covers and possibly other BBC stuff. Willing to do package deal possibly? I will coming through Alabama next week so there may not be need to ship.
Thanks,
Mike
Posted via Mobile Device

**w314speed** · 03-21-2013, 06:33 AM

I'm out on the headers. To hard to follow two threads for same parts?

J kippin · 03-21-2013, 07:07 AM

I would need both the brackets and pulleys could you send a photo of what you have I have a 86 serpentine setup but it puts the alternator and A/C on the wrong sides. I do want it to look somewhat stock.

the_69_C10 · 03-22-2013, 11:24 AM

Okay! Just let mw known
Posted via Mobile Device

neo1370 · 03-23-2013, 08:24 AM

how about a price on motor mounts shipped to 16145, do they use the clam shell upper or old style car upper/

02-26-2013, 12:59 AM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Fat Motor Parts and Turbo 400 I had a friend build a mild 454 for my son's truck and I only got about 4 or 5 hundred miles out of it and spun a rod bearing. I am thinking about going LS and Od so I have a ton of stuff to sell. I have coated hooker headers, tubular motor mounts, stock bore 454 block, fresh 782 heads, performer rpm intake, cam and lifters, springs on heads setup for this cam. built turbo 400 with upgraded sprag and a Ptc Stall converter. Deep Aluminum Pan. All parts are in this build thread http://67-72chevytrucks.com/vboard/s...d.php?t=388019 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-26-2013, 01:00 AM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Fat Motor Parts and Turbo 400 I would be interested in partial trades for ls motor and od stuff. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-26-2013, 02:11 AM	#3
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Fat Motor Parts and Turbo 400 prices on heads,intake,cam,lifters __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

02-26-2013, 08:36 AM	#5
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: Fat Motor Parts and Turbo 400 im interested in the tubular motor mounts jw

02-26-2013, 09:27 AM	#6
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: Fat Motor Parts and Turbo 400 interested in 454 block (4 bolt main?), headers and heads w/pics and detailed description. thanks, dan Last edited by w314speed; 02-26-2013 at 09:33 AM.

02-26-2013, 08:18 AM	#4
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Fat Motor Parts and Turbo 400 Im interested in the headers pics and a price?

02-26-2013, 10:51 AM	#7
MadnessBigBlock Registered User Join Date: May 2008 Location: Neche, North Dakota/Winnipeg, Manitoba Posts: 605	Re: Fat Motor Parts and Turbo 400 Whats the stall rating on the torque converter? Posted via Mobile Device

02-26-2013, 03:36 PM	#8
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Fat Motor Parts and Turbo 400 Interested in headers Posted via Mobile Device __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

03-17-2013, 10:42 PM	#9
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Fat Motor Parts and Turbo 400 Sorry this post slipped through the cracks. I will honor the order of post on this thread. I made a shop clean out post with prices on all. Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-18-2013, 10:13 AM	#10
J kippin Registered User Join Date: Apr 2012 Location: Cape Neddick Posts: 215	Re: Fat Motor Parts and Turbo 400 I would be interested in the brackets for the accessories if you would sell them.

03-18-2013, 12:25 PM	#11
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Fat Motor Parts and Turbo 400 I am still interested in the headers as I was in line post #4.

03-18-2013, 06:16 PM	#12
ecgate Registered User Join Date: Aug 2012 Location: Council Bluffs, Iowa Posts: 280	Re: Fat Motor Parts and Turbo 400 Please put me in line for the headers.

03-18-2013, 06:58 PM	#13
Critterman71 Registered User Join Date: Nov 2008 Location: Lansing Mi Posts: 642	Re: Fat Motor Parts and Turbo 400 Wish I could have gotten home earlier to see the new parts post made for all of the parts. headers are sold so much for honoring this post order of interest.

03-18-2013, 08:07 PM	#14
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Fat Motor Parts and Turbo 400 Critterman the headers are your if you want them. Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-18-2013, 10:30 PM	#18
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: Fat Motor Parts and Turbo 400 You have a 400 tranny? If so, I would be like to know if you're selling your 32-spline yolk. __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900



Register or Log In To remove these advertisements.

03-18-2013, 11:15 PM	#19
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Fat Motor Parts and Turbo 400 I need to find out what kind of yolk I will need for a 4l80. Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-20-2013, 05:08 PM	#20
ztk123 Registered User Join Date: Mar 2013 Location: Louisville, KY Posts: 233	Re: Fat Motor Parts and Turbo 400 I know I'm down the line a way, but very interested in the headers, intake, carb, valve covers and possibly other BBC stuff. Willing to do package deal possibly? I will coming through Alabama next week so there may not be need to ship. Thanks, Mike Posted via Mobile Device

03-21-2013, 06:33 AM	#21
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: Fat Motor Parts and Turbo 400 I'm out on the headers. To hard to follow two threads for same parts?

03-21-2013, 07:07 AM	#22
J kippin Registered User Join Date: Apr 2012 Location: Cape Neddick Posts: 215	Re: Fat Motor Parts and Turbo 400 I would need both the brackets and pulleys could you send a photo of what you have I have a 86 serpentine setup but it puts the alternator and A/C on the wrong sides. I do want it to look somewhat stock.

03-22-2013, 11:24 AM	#23
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: Fat Motor Parts and Turbo 400 Okay! Just let mw known Posted via Mobile Device __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900

03-23-2013, 08:24 AM	#24
neo1370 Registered User Join Date: Aug 2006 Location: PA Posts: 241	Re: Fat Motor Parts and Turbo 400 how about a price on motor mounts shipped to 16145, do they use the clam shell upper or old style car upper/

Register or Log In To remove these advertisements.