|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-25-2013, 02:23 PM
|
#1 |
|
Registered User
Join Date: Mar 2013
Location: Victoria, BC
Posts: 6
|
Swap "granny gear" 4speed to a m20 4 speed muncie
Hello,
I have a 1968 c10 stepside with a 350 and a 4 speed manual. I can pick up a muncie M20 for a good price. Has anyone ever installed one of these in their truck? Is it something that is fairly easy to do without any major modifications? Is there a better inexpensive transmission solution I could look at? Any advise would be greatly appreciated. Thx Posted via Mobile Device |
|
|
|
03-25-2013, 05:55 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Swap "granny gear" 4speed to a m20 4 speed muncie
What is cheap on the trans, & what rear gear are you running? crazyL
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
03-25-2013, 07:06 PM
|
#3 |
|
Registered User
Join Date: Mar 2013
Location: Victoria, BC
Posts: 6
|
Re: Swap "granny gear" 4speed to a m20 4 speed muncie
$400 for the trans, I think the rear end is running 4:11 but I'm not sure.
Posted via Mobile Device |
|
|
|
|
03-25-2013, 08:08 PM
|
#4 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: Swap "granny gear" 4speed to a m20 4 speed muncie
If the trans is in good shape, its a "smokin deal"....most likely a 3.73 gear on a 1/2 ton truck. I like to pull the gears way south on the box.....read the sig, 3.28/2.14/1.57/1.24/1 /.76 When the yougest kid had that old truck to 5700, in 5th gear....I told him either back of , or pull the next gear...she is allready @ 125
 You dont want to play with the M-21-22 (2.20 1st gear)...too tall(good on the strip, with a 4.56 or 4.88 gear), & you will row the snot out of that box, in that 1320 ft ride! crazyl
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
03-26-2013, 09:43 AM
|
#5 |
|
No No
Join Date: Jun 2005
Location: Pueblo Colorado
Posts: 1,781
|
Re: Swap "granny gear" 4speed to a m20 4 speed muncie
Minus needing a shifter for the Muncie and making a new hole for it should be a direct swap can even use the same clutch. I love m20's there a great trans with the right rear end I had one in a olds and with the rear end in that car holy crap shifting to 4th at 80 was fun dissent seem like I was reconfigure it that high either . Granted it would be better with a 5 speed but the cash they are wanting is not bad at all
Posted via Mobile Device
__________________
1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler |
|
|
|
|
03-26-2013, 10:44 AM
|
#6 |
|
Registered User
Join Date: Mar 2013
Location: Victoria, BC
Posts: 6
|
Re: Swap "granny gear" 4speed to a m20 4 speed muncie
Ok, thanks for the info that's what I needed to know!
Posted via Mobile Device |
|
|
|
|
03-26-2013, 09:34 PM
|
#7 |
|
Registered User
 
Join Date: Mar 2011
Location: Valley of the Sunstroke, Arizona
Posts: 1,210
|
Re: Swap "granny gear" 4speed to a m20 4 speed muncie
See my thread, I'm doing one now
__________________
My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131 |
|
|
|
|
| Bookmarks |
| Tags |
| 4speed, muncie, trans swap |
|
|
Linear Mode
