WA CPP Spindles & 63-72 Step Notch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leftcoast66 · 03-24-2013, 05:59 PM

Please close

leftcoast66 · 03-26-2013, 05:10 AM

Please close, my error.

hvacfatboy · 03-26-2013, 08:44 AM

are the spindles the modular spindles that dont move wheel out, if so i will take them

hvacfatboy · 03-26-2013, 08:48 AM

are these for the 67-72 models there website states that part number is for 73-87 models, if these are same i will take them thanks

**bcnya2** · 03-26-2013, 08:50 AM

Hello...are the spindles for 1/2 ton?

Thanks, Greg
Posted via Mobile Device

yellowGT · 03-26-2013, 12:44 PM

$80 shipped for the step notch?

leftcoast66 · 03-26-2013, 02:36 PM

I responded in PM's to everyone. Sorry I had spaced out that the spindles are for a 73-87 spindles for converting it to 5 lug. Here's the link to lolife99's thread on doing the conversion on the stock crossmember and control arms Link

mahanian · 03-26-2013, 04:04 PM

Do you happen to have the caliper bracket for the spindles? I'll get in line for them

leftcoast66 · 03-26-2013, 04:32 PM

Quote:

Originally Posted by mahanian

Do you happen to have the caliper bracket for the spindles? I'll get in line for them

I don't have the bracket, but it's only $75 from what I've heard. So far I haven't seen any money from anyone, first one to put up the money takes it.

**bcnya2** · 03-26-2013, 04:38 PM

Thanks for the updating....and the honesty.....I am going bow out....if they make it to me...please pass to tbe next person in line. Thanks, Greg
Posted via Mobile Device

**lolife99** · 03-26-2013, 06:18 PM

These are 73-87 HD (2" drop) spindles for 1.25" rotors.
I would close this thread and re-list them in the 73-87 parts board area.
These are $298 from Summit Racing.

The last spindles I recieved from a board member,... cost almost $60 to ship.
This is a deal!

I will leave a standing offer of $200 shipped,... and I don't even need them.
(let me know if you reduce your price that much)

**lolife99** · 03-26-2013, 06:26 PM

This bracket is required for using stock calipers on 12" rotors.
http://www.summitracing.com/parts/clp-6087dbk

hvacfatboy · 03-26-2013, 07:36 PM

i am going to pass

leftcoast66 · 03-27-2013, 02:59 AM

Sorry guys, that was my fault. I apologize for not doing my research, that's my error. Please close this thread mod's, or tell me how I can do it, I'm not sure how.

03-24-2013, 05:59 PM	#1
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	CPP Spindles & 63-72 Step Notch Please close Last edited by leftcoast66; 03-27-2013 at 03:04 AM.

03-26-2013, 05:10 AM	#2
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: CPP Spindles & 63-72 Step Notch Please close, my error. Last edited by leftcoast66; 03-27-2013 at 03:04 AM.

03-26-2013, 08:44 AM	#3
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: CPP Spindles & 63-72 Step Notch are the spindles the modular spindles that dont move wheel out, if so i will take them

03-26-2013, 08:48 AM	#4
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: CPP Spindles & 63-72 Step Notch are these for the 67-72 models there website states that part number is for 73-87 models, if these are same i will take them thanks

03-26-2013, 08:50 AM	#5
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: CPP Spindles & 63-72 Step Notch Hello...are the spindles for 1/2 ton? Thanks, Greg Posted via Mobile Device __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

03-26-2013, 12:44 PM	#6
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: CPP Spindles & 63-72 Step Notch $80 shipped for the step notch? __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

03-26-2013, 02:36 PM	#7
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: CPP Spindles & 63-72 Step Notch I responded in PM's to everyone. Sorry I had spaced out that the spindles are for a 73-87 spindles for converting it to 5 lug. Here's the link to lolife99's thread on doing the conversion on the stock crossmember and control arms Link

03-26-2013, 04:04 PM	#8
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: CPP Spindles & 63-72 Step Notch Do you happen to have the caliper bracket for the spindles? I'll get in line for them __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

03-26-2013, 04:38 PM	#10
bcnya2 Senior Member Join Date: Oct 2012 Location: New Windsor, Md (Baltimore) Posts: 945	Re: CPP Spindles & 63-72 Step Notch Thanks for the updating....and the honesty.....I am going bow out....if they make it to me...please pass to tbe next person in line. Thanks, Greg Posted via Mobile Device __________________ 72 Cheyenne Super 350 Holley EFI/700R4 67 Camaro SS/RS 68 Corvette 427 Tri-power 4-speed convertible 55 Chevy Belair Hardtop

03-26-2013, 06:18 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: CPP Spindles & 63-72 Step Notch These are 73-87 HD (2" drop) spindles for 1.25" rotors. I would close this thread and re-list them in the 73-87 parts board area. These are $298 from Summit Racing. The last spindles I recieved from a board member,... cost almost $60 to ship. This is a deal! I will leave a standing offer of $200 shipped,... and I don't even need them. (let me know if you reduce your price that much) __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-26-2013, 06:26 PM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: CPP Spindles & 63-72 Step Notch This bracket is required for using stock calipers on 12" rotors. http://www.summitracing.com/parts/clp-6087dbk Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

03-26-2013, 07:36 PM	#13
hvacfatboy Registered User Join Date: Oct 2011 Location: Timberlake NC Posts: 397	Re: CPP Spindles & 63-72 Step Notch i am going to pass

03-27-2013, 02:59 AM	#14
leftcoast66 Registered User Join Date: Sep 2006 Location: Covington, WA Posts: 770	Re: CPP Spindles & 63-72 Step Notch Sorry guys, that was my fault. I apologize for not doing my research, that's my error. Please close this thread mod's, or tell me how I can do it, I'm not sure how.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.