Woodgrain trim questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

birdistheword · 03-26-2013, 11:57 PM

Anyone know any tips or advice to get the woodgrain sticker trim off? I have all the original trim and I'm trying to redo it.

JimKshortstep4x4 · 03-27-2013, 05:27 AM

I use an industrial model "hair dryer" to heat the woodgrain and it peels off very easily. You have to play with the heat as it works better if you don't overheat it. I don't know if a regular hair dryer will work but you could try one if you have access to it.

Jim

SuperC10Tex · 03-27-2013, 06:57 AM

I used "Goof-off", just spread it out in small sigments (2 ft at a time) at a time....let sit for about five-ten minutes...off it comes (keep off the painted areas, unless you are repainting). Also get a window screen spline tool, has two different size rollers...helps roll/work out those dings in the trim while you have it off!!!

Good Luck!!!

03-26-2013, 11:57 PM	#1
birdistheword Registered User Join Date: Apr 2011 Location: Tacoma, Washington Posts: 236	Woodgrain trim questions Anyone know any tips or advice to get the woodgrain sticker trim off? I have all the original trim and I'm trying to redo it. __________________ Erik 1969 Chevy K20 6.0L/4L80E/NP205 1971 Chevy C30 Cheyenne Longhorn 454/TH400 1979 Chevy K30 dually currently in pieces

03-27-2013, 05:27 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Woodgrain trim questions I use an industrial model "hair dryer" to heat the woodgrain and it peels off very easily. You have to play with the heat as it works better if you don't overheat it. I don't know if a regular hair dryer will work but you could try one if you have access to it. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

03-27-2013, 06:57 AM	#3
SuperC10Tex Registered User Join Date: Oct 2012 Location: Texas Posts: 567	Re: Woodgrain trim questions I used "Goof-off", just spread it out in small sigments (2 ft at a time) at a time....let sit for about five-ten minutes...off it comes (keep off the painted areas, unless you are repainting). Also get a window screen spline tool, has two different size rollers...helps roll/work out those dings in the trim while you have it off!!! Good Luck!!! __________________ 1970 GMC Sierra Grande CST SWB Fleetside "Texas Touch" "An intellectual is a man who takes more words than necessary to tell more than he knows"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.