Fitting new carpet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dodger · 03-31-2013, 08:38 AM

Hey all,

Has anyone fitted an ACCMATS carpet before?

Just chasing some advice or tips before I fit a new carpet to my 50.

There are no holes cut for anything so I'm trying to work out the best way to work around the pedals and steering column.

The carpet doesn't look like it runs along the sides of the seat where that 2 or 3 inch strip is between seat and door. Any ideas on making this area look neat.

Any ideas on fixing it down would be good too if anyone has done it. Was thinking Velcro strips so I can access transmission and battery.

Cheers.
Posted via Mobile Device

03-31-2013, 08:38 AM	#1
Dodger Registered User Join Date: Mar 2013 Location: Perth, Western Australia Posts: 141	Fitting new carpet Hey all, Has anyone fitted an ACCMATS carpet before? Just chasing some advice or tips before I fit a new carpet to my 50. There are no holes cut for anything so I'm trying to work out the best way to work around the pedals and steering column. The carpet doesn't look like it runs along the sides of the seat where that 2 or 3 inch strip is between seat and door. Any ideas on making this area look neat. Any ideas on fixing it down would be good too if anyone has done it. Was thinking Velcro strips so I can access transmission and battery. Cheers. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.