Someone save this one, it doesnt deserve this - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sir_talk_alot · 04-10-2013, 02:36 PM

http://littlerock.craigslist.org/cto/3735142040.html

Broke my heart when i saw it
Posted via Mobile Device

67ChevyRedneck · 04-10-2013, 02:41 PM

Maybe its the pic angle... but that looks like a longbed to me? She looks to be a good candidate for a cab swap.
Posted via Mobile Device

MSHax · 04-10-2013, 02:43 PM

Looks like a prime donor for a convertible project to me! :P

It's about 2000 miles too far for me.

black_sheep454 · 04-10-2013, 02:59 PM

I think it's just the angle that's making it look long. Would make a sweet truck done though
Posted via Mobile Device

**LockDoc** · 04-10-2013, 03:03 PM

-
I have 3 or 4 tops I have saved from trucks I parted. Not too hard if you are a welder.

LockDoc

**CC69Rat** · 04-10-2013, 03:30 PM

Yep, could be fixed. I just hope it hasn't been sitting long enough for water / leaves and other junk to rot the floors (?)

buckskins4ever · 04-10-2013, 03:58 PM

Wow, that hurts.....wish I were able to get down there to snatch it up. I have seen a lot of nice usable shot beds come out of Arkansas.

sir_talk_alot · 04-10-2013, 04:01 PM

Quote:

Originally Posted by buckskins4ever

Wow, that hurts.....wish I were able to get down there to snatch it up. I have seen a lot of nice usable shot beds come out of Arkansas.

Yea it not a real rusty state and stuff lives long as long as its not sitting on the ground. Neighbor farmer has a solid for its age 36 chevy 1.5 ton
Posted via Mobile Device

buckskins4ever · 04-10-2013, 04:51 PM

Quote:

Originally Posted by sir_talk_alot

Yea it not a real rusty state and stuff lives long as long as its not sitting on the ground. Neighbor farmer has a solid for its age 36 chevy 1.5 ton
Posted via Mobile Device

My grandparents lived in Bearden AR, until my grandfathers passing back in 1998. Then she moved to St Louis in 2002. I think Arkansas must have sold 40% of the United States short bed trucks ever made. Seemed like no matter where I went or what brand it was, they were all shortys.

04-10-2013, 02:36 PM	#1
sir_talk_alot Registered User Join Date: May 2011 Location: Mayflower,AR Posts: 802	Someone save this one, it doesnt deserve this http://littlerock.craigslist.org/cto/3735142040.html Broke my heart when i saw it Posted via Mobile Device __________________ -Mike- '94 GMT 400 ext z71 3" body, 3 in rough country, hd mirrors, 20" motometals on 35s

04-10-2013, 02:41 PM	#2
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Someone save this one, it doesnt deserve this Maybe its the pic angle... but that looks like a longbed to me? She looks to be a good candidate for a cab swap. Posted via Mobile Device __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

04-10-2013, 02:43 PM	#3
MSHax Registered User Join Date: Mar 2013 Location: Oakland, Ca. Posts: 135	Re: Someone save this one, it doesnt deserve this Looks like a prime donor for a convertible project to me! :P It's about 2000 miles too far for me. __________________ I stopped adding up how much I spend on my builds, it only makes me doubt my sanity knowing I've spent more than 9 times it's original value new.

04-10-2013, 02:59 PM	#4
black_sheep454 Registered User Join Date: May 2011 Location: Lebanon, Mo. Posts: 1,315	Re: Someone save this one, it doesnt deserve this I think it's just the angle that's making it look long. Would make a sweet truck done though Posted via Mobile Device __________________ 1968 chevy lwb, getting ready to join forces with the 70 gmc 1970 gmc swb, getting ready to be a 68 chevy swb 1971 gmc lwb 2500 2wd Sierra Grande 1988 chevy 1-ton crew cab 2wd waiting for a 12v cummins

04-10-2013, 03:03 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,394	Re: Someone save this one, it doesnt deserve this - I have 3 or 4 tops I have saved from trucks I parted. Not too hard if you are a welder. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-10-2013, 03:30 PM	#6
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: Someone save this one, it doesnt deserve this Yep, could be fixed. I just hope it hasn't been sitting long enough for water / leaves and other junk to rot the floors (?) __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

04-10-2013, 03:58 PM	#7
buckskins4ever Registered User Join Date: Dec 2012 Location: Altoona Iowa Posts: 481	Re: Someone save this one, it doesnt deserve this Wow, that hurts.....wish I were able to get down there to snatch it up. I have seen a lot of nice usable shot beds come out of Arkansas.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.