steering column replacemen t - The 1947 - Present Chevrolet & GMC Truck Message Board Network

philB · 04-10-2013, 11:07 PM

"69 c10 2 w/d sbc, have to replace the steering column, lower bearing gone and shaft is worn, want to use an aftermarket unit, lot of um on ebay but dont have a good knowleadge of this and will be changing to power steering also. The old steering from the rag joint up is ok but there is a coupling, grease seal inbetween the column shaft and gear box, and question is do I need this joint or can it be replaced with u-joints?

04-10-2013, 11:07 PM	#1
philB Registered User Join Date: Oct 2012 Location: new orleans, la. Posts: 217	steering column replacemen t "69 c10 2 w/d sbc, have to replace the steering column, lower bearing gone and shaft is worn, want to use an aftermarket unit, lot of um on ebay but dont have a good knowleadge of this and will be changing to power steering also. The old steering from the rag joint up is ok but there is a coupling, grease seal inbetween the column shaft and gear box, and question is do I need this joint or can it be replaced with u-joints?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.