LS Cam Swap...

[Super73]

Just check the magnet tip of the pen magnets. One time I did it this way and when I pulled the pen out, the magnet stayed on the lifter.. Luckily I was able to get it out with a thin piece of square rod that we ground the tip to a point. But it little rely took us 3 hours.
Posted via Mobile Device

[Hart_Rod]

Originally Posted by 68GMCCustom

Oh yes...forgot your motor had DOD. I guess you also know you'll need new head bolts...or studs if you prefer.

I've got ARP headbolts and new head gaskets. I thought aobut going with the head studs, but they were $200 more. Hopefully I've got everything required to put it back together, .

Originally Posted by Super73

Just check the magnet tip of the pen magnets. One time I did it this way and when I pulled the pen out, the magnet stayed on the lifter.. Luckily I was able to get it out with a thin piece of square rod that we ground the tip to a point. But it little rely took us 3 hours.
Posted via Mobile Device

That suxs. At least you didn't have to pull the heads, right?