|
|
|
04-13-2013, 06:39 PM
|
#1 |
|
Registered User
 
Join Date: Mar 2011
Location: bolivar, mo
Posts: 839
|
Re: Help! Crack in frame?
Verify as best you can if the frame is straight----chek to see if the truck drives straight (flat pavement, measure front tread width then back tread width----wet tires slightly, drive it forward at least one full truck length (or more), see that it is tracking straight-----if its all straight , drill a small hole at the end of the crack to stop any growth of the crack---then lay a good bead on top and on bottom of the crack (if you can get to it). A couple Good welds and it will be stronger than before.
__________________
1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030 |
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
