turbos on inline 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mknittle · 04-17-2013, 02:17 PM

So a .02 modular piston would be .01 over stock 235 Hmmmm
They aren't cheap though.
then there is the issue of only having four main bearings vs the 250 and 292 having 7

1-ton of fun · 04-18-2013, 10:16 AM

Quote:

Originally Posted by mknittle

So a .02 modular piston would be .01 over stock 235 Hmmmm
They aren't cheap though.
then there is the issue of only having four main bearings vs the 250 and 292 having 7

Yeah, it's too bad that I have a good set of forged modular pistons in my garage, but they are the stock bore size 3.552"
Posted via Mobile Device

**1project2many** · 04-19-2013, 12:15 AM

What's the pin height on the Ford piston?

1-ton of fun · 04-19-2013, 11:59 PM

Quote:

Originally Posted by 1project2many

What's the pin height on the Ford piston?

1.1215" I believe
Posted via Mobile Device

mknittle · 04-19-2013, 11:53 AM

Quote:

Originally Posted by 1-ton of fun

Yeah, it's too bad that I have a good set of forged modular pistons in my garage, but they are the stock bore size 3.552"
Posted via Mobile Device

That figures

04-17-2013, 02:17 PM	#1
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: turbos on inline 6 So a .02 modular piston would be .01 over stock 235 Hmmmm They aren't cheap though. then there is the issue of only having four main bearings vs the 250 and 292 having 7 __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

04-19-2013, 12:15 AM	#3
1project2many Senior Member Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,217	Re: turbos on inline 6 What's the pin height on the Ford piston?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.