new torque conveter needed with new flywheel? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 11-19-2003, 02:14 AM

since my engine will be a 85-below block, i'll need a different flywheel.

the 86' flywheel was weird and i cant use that again. since i'm having to get an older style flywheel, do i have to get a new torque conveter or will the current, stock one hook up fine?

low 84 · 11-19-2003, 02:27 AM

you want a higher stall one anyways

ocbaud · 11-19-2003, 02:29 AM

Quote:

Originally posted by low 84
you want a higher stall one anyways

i'm getting a higher stall one anyways

just wondering if the old one would bolt up

*1FaastC10* · 11-19-2003, 02:43 AM

what does it matter if you're getting a new one anyways? but yes, it will bolt up.

11-19-2003, 02:14 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	new torque conveter needed with new flywheel? since my engine will be a 85-below block, i'll need a different flywheel. the 86' flywheel was weird and i cant use that again. since i'm having to get an older style flywheel, do i have to get a new torque conveter or will the current, stock one hook up fine?

11-19-2003, 02:27 AM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	you want a higher stall one anyways __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

11-19-2003, 02:43 AM	#4
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	what does it matter if you're getting a new one anyways? but yes, it will bolt up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.