Project: AREA|51 [OCD meets ADD]

[DJDAudio]

So Day1 started like this,



Then started removing parts,



Amazingly bolts came out with minimal trouble.



Expected them to be allot worse.



the inner driver fender.



Dealing with all of the past owners 'fixes' over the years was interesting.



Random old patch panels.. With one bolt almost holding it on haha



Pass side was worse...



Pulled the seat.. and wow, was not expecting it to be in such great shape, the frame and the floor where amazing.



Home made wheel puller



Everything pulled from the front, and the engine even turned over!



All things pulled from the floor.,



Gas tank also in great shape..




Back of seat frame also in good shape.



Anyone know anything about this old turn signal assembly?





Pulled the plugs to be sure the motor was clear,




Glad I got another gill, this one was pretty rough



Rad was still full of coolant!






Look at those springs and frame, amazing shape!

Think there is any resale value?



Remember those cab corners with plaster?

Um this all came out of one corner!!



And the other corner... wow




then pulled the trim, to find some good metal behind.



The old bolts did not want to budge on the bed, so out with the grinder..





And the bed off the frame. Friend of mine spent some good time dolling and straightening the metal. ... That is some thick sheet!




The 3/4 ton frame.