switching from old heads to really old heads - need pully advice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*cranknut67* · 11-19-2003, 03:47 AM

I just got the new heads in casting #3782461 cut for 1.6 2.02 valves ( 3 angle job fully tricked out ), and I noticed that they have no accessory holes. I now need the whole dang setup from an older non head mounted block. and I plan to set up the heads this weekend - anybody in az have a whole setup pullies and all, to sell? I have the power steering bracket - ordered it online tonite. still need the pullies for the water pump crank ( 3 groove I think) and the alternator bracket. - I can allready tell that this is going to be a pain in the butt

confused:

jose · 11-19-2003, 04:57 AM

I have the alternator brackets for 327 that are used with the stock exhaust manifolds 25.00 plus shipping

70ChevyLongbed · 11-19-2003, 11:33 AM

Check http://67-72chevytrucks.com/vboard/s...threadid=76667

Very solid set up, it's not running yet, but I think it will be worth the money.

Good luck!

smonty · 11-19-2003, 04:58 PM

I have the brackets you need A/C w/almost new rotary compressor w/hoses, w/power steering pump w/pulleys and nice reservoir. Just sold my 327 w/461 heads. I have the nice angled back (both) rams horn exhaust manifolds for them w/accessory mounts also. Take it all for $250.00. It is the complete package. These mount to the exhaust manifold, water pump bolt, and intake bolt. Nice set of Grove brackets. Just let me know as I am going to put all of my parts on Ebay in the next couple of days.

Ernie
smonty46@hotmail.com

70ChevyLongbed · 11-19-2003, 05:38 PM

Smonty,

That's a sweet deal. If Crank doesn't get the set you should do fine on eBay.

*cranknut67* · 11-19-2003, 05:41 PM

I need the alternator bracket, the water pump pully and the crank triple groove pulley. I don't need anything fancy or the air compressor bracket yet.
.....

smonty · 11-19-2003, 06:41 PM

I thought you might need everything since you went to a different style of heads. I have everything you need but really don't want to break up my set at the moment. Someone needs all of it. It was not easy collecting it all.

Ernie

*cranknut67* · 11-19-2003, 06:45 PM

sent you a pm. I am interested even if I have to get the whole lot.

thanks!

smonty · 11-19-2003, 07:15 PM

Sent you an email w/some pics. I can go ahead and break up some of my lot. I just don't want to separate the brackets. I do have the pulley you need.

Ernie

70ChevyLongbed · 11-20-2003, 09:25 AM

smonty,

If that leaves the A/C Compressor and hoses, I might be interested in those. I would use the Alan Grove A/C set-up if you are keeping the all the brackets together.

Let me know.

smonty · 11-20-2003, 12:23 PM

Sent you a PM.

Ernie

11-19-2003, 03:47 AM	#1
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	switching from old heads to really old heads - need pully advice I just got the new heads in casting #3782461 cut for 1.6 2.02 valves ( 3 angle job fully tricked out ), and I noticed that they have no accessory holes. I now need the whole dang setup from an older non head mounted block. and I plan to set up the heads this weekend - anybody in az have a whole setup pullies and all, to sell? I have the power steering bracket - ordered it online tonite. still need the pullies for the water pump crank ( 3 groove I think) and the alternator bracket. - I can allready tell that this is going to be a pain in the buttconfused:

11-19-2003, 04:57 AM	#2
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	I have the alternator brackets for 327 that are used with the stock exhaust manifolds 25.00 plus shipping __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

11-19-2003, 04:58 PM	#4
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply I have the brackets you need A/C w/almost new rotary compressor w/hoses, w/power steering pump w/pulleys and nice reservoir. Just sold my 327 w/461 heads. I have the nice angled back (both) rams horn exhaust manifolds for them w/accessory mounts also. Take it all for $250.00. It is the complete package. These mount to the exhaust manifold, water pump bolt, and intake bolt. Nice set of Grove brackets. Just let me know as I am going to put all of my parts on Ebay in the next couple of days. Ernie smonty46@hotmail.com __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-19-2003, 05:38 PM	#5
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,265	Smonty, That's a sweet deal. If Crank doesn't get the set you should do fine on eBay. __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

11-19-2003, 05:41 PM	#6
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	working with NON ACCESSORY HEADS? I need the alternator bracket, the water pump pully and the crank triple groove pulley. I don't need anything fancy or the air compressor bracket yet. .....

11-19-2003, 11:33 AM	#3
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,265	Here was my fix for the alternator bracket. Check http://67-72chevytrucks.com/vboard/s...threadid=76667 Very solid set up, it's not running yet, but I think it will be worth the money. Good luck! __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

11-19-2003, 06:41 PM	#7
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	Reply I thought you might need everything since you went to a different style of heads. I have everything you need but really don't want to break up my set at the moment. Someone needs all of it. It was not easy collecting it all. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-19-2003, 06:45 PM	#8
cranknut67 Account Suspended Join Date: Jun 2003 Posts: 139	smonty - sent you a pm. I am interested even if I have to get the whole lot. thanks!

11-19-2003, 07:15 PM	#9
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	cranknut67 Sent you an email w/some pics. I can go ahead and break up some of my lot. I just don't want to separate the brackets. I do have the pulley you need. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-20-2003, 09:25 AM	#10
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,265	smonty, If that leaves the A/C Compressor and hoses, I might be interested in those. I would use the Alan Grove A/C set-up if you are keeping the all the brackets together. Let me know. __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

11-20-2003, 12:23 PM	#11
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	reply to 70ChevyLongbed Sent you a PM. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.