|
05-07-2013, 08:34 PM
|
#1 |
|
Cluster King
 
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Tail gate rattle
I am happy to say that I got the 72 out this week and put some miles on it. Actually the first I have drove it with the new gate. It has a rattle that is driving me nuts already. It has a little too much clearance in the trunion/gate pocket area. I am not sure if the trunion is wore to small or the gate pocket is wore to large. I don't recall having this issue with the old gate but I also did not put many miles on it with the old gate. The top of the gate closes/latches and feels good and tight as it should.
Any one have a similar problem? How did you fix it? The gate is absolutely beautiful. I will do what I have to to make it right and cure this because I know it is not normal. Thank you for any advise, Tom |
|
|
|
05-07-2013, 08:44 PM
|
#2 |
|
Registered User
Join Date: May 2012
Location: Hickory NC
Posts: 2,351
|
Re: Tail gate rattle
Try shaking it a little with it unlatched to see if the internals are rattling or may be the side supports
|
|
|
|
|
05-07-2013, 09:03 PM
|
#3 |
|
Registered User
Join Date: Sep 2012
Location: Factory
Posts: 681
|
Re: Tail gate rattle
My folding supports were slinging side to side and banging like some kind of gypsy tambourine. I called my brother back in Georgia and he recommended wrapping the support with electrical tape in the spot that hits. I did that to both sides and voila! No mo noise.
|
|
|
|
|
05-07-2013, 09:13 PM
|
#4 |
|
Registered User
Join Date: Oct 2001
Location: Grapevine, Tx.
Posts: 2,142
|
Re: Tail gate rattle
This was one of my cheap fix's
__________________
John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS |
|
|
|
|
05-07-2013, 09:14 PM
|
#5 | |
|
Registered User
Join Date: Sep 2012
Location: Factory
Posts: 681
|
Re: Tail gate rattle
Quote:
|
|
|
|
|
|
05-07-2013, 09:45 PM
|
#6 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Tail gate rattle
Mine is the handle, It's loose and rattles when it's shut.It works fine it's just loose and you can take your hand and swat it and it just swigs without opening it.
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
05-08-2013, 09:08 AM
|
#7 |
|
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: Tail gate rattle
There are two rubber bumpers I believe to help with tail gate rattle. Are they still there? Most are long gone.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
