intake manifold me - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wittyandnitty · 05-09-2013, 02:00 PM

Posted via Mobile Device

77ChevySharkBite · 05-09-2013, 02:10 PM

Welcome to the forum, from Houston as well!

I'm not sure what your trying to find out but there's nothing posted.

wittyandnitty · 05-09-2013, 03:03 PM

Sorry . But I found a port, of what I think is a vacuum port, andi was not sure what it needs to hook up to.

Posted via Mobile Device

77ChevySharkBite · 05-09-2013, 03:05 PM

Oh okay, where in Houston you located around? I'm about 20 minutes from Downtown.

wittyandnitty · 05-09-2013, 03:07 PM

About the 30 minutes from downtown.
Posted via Mobile Device

77ChevySharkBite · 05-09-2013, 03:08 PM

North or South? I'm north of downtown headed towards Clear Lake

wittyandnitty · 05-09-2013, 03:09 PM

Northwest
Posted via Mobile Device

77ChevySharkBite · 05-09-2013, 03:12 PM

I bought my truck on that side of town actually funny.

wittyandnitty · 05-09-2013, 03:12 PM

So do ypu have an idea of where the vacuum port goes to
Posted via Mobile Device

77ChevySharkBite · 05-09-2013, 03:17 PM

What kind of motor do you have?

wittyandnitty · 05-09-2013, 03:19 PM

Chevy 350 with edelbrock 4 barrel carb and intke manifold
Posted via Mobile Device

SigFTW · 05-09-2013, 03:26 PM

Houston Boys!
I'm in Cypress.

I have the Edelbrock 4 on a 350 also. Have one line going to the distrib, one plugged one to the valve cover. That will change when I redo the vacuum lines and A/C.

77ChevySharkBite · 05-09-2013, 03:37 PM

I'm trying to find an answer for you WittyandNitty, are you trying to find out the vacuum advance goes or just where the vacuum port goes?

77ChevySharkBite · 05-09-2013, 03:38 PM

Quote:

Originally Posted by SigFTW

Houston Boys!
I'm in Cypress.

I have the Edelbrock 4 on a 350 also. Have one line going to the distrib, one plugged one to the valve cover. That will change when I redo the vacuum lines and A/C.

Man your at least an hour from me

Post a picture of your set up for us, because I'm trying to search online and can't find much of anything.

SigFTW · 05-09-2013, 03:44 PM

Quote:

Originally Posted by 77ChevySharkBite

Man your at least an hour from me

Post a picture of your set up for us, because I'm trying to search online and can't find much of anything.

I will take some pic when I get home, at work right now.

77ChevySharkBite · 05-09-2013, 03:47 PM

Quote:

Originally Posted by SigFTW

I will take some pic when I get home, at work right now.

Story of my life!

because I went and put an aftermarket filter on mine and if I remember correctly I just put a T on my carb. I just don't want to mislead our fellow Houston brother here. I want to get him the correct answer.

77ChevySharkBite · 05-09-2013, 03:49 PM

Wittyandnitty I found this, it's for an edelbrock carb so I would imagine this could be the solution to the issue your trying to find out.

http://forums.chevyhiperformance.com...rts-which-one/

SigFTW · 05-09-2013, 03:55 PM

I checked my pics and found one. Here is my setup, two vacuum lines are plugged, one in the back and one in the front.

77ChevySharkBite · 05-09-2013, 04:01 PM

Quote:

Originally Posted by SigFTW

I checked my pics and found one. Here is my setup, two vacuum lines are plugged, one in the back and one in the front.

Awesome man!!! Now that's team work from them Texas boys!

05-09-2013, 02:00 PM	#1
wittyandnitty Registered User Join Date: Apr 2013 Location: HOUSTON Posts: 17	intake manifold me Posted via Mobile Device

05-09-2013, 02:10 PM	#2
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me Welcome to the forum, from Houston as well! I'm not sure what your trying to find out but there's nothing posted. __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:03 PM	#3
wittyandnitty Registered User Join Date: Apr 2013 Location: HOUSTON Posts: 17	Re: intake manifold me Sorry . But I found a port, of what I think is a vacuum port, andi was not sure what it needs to hook up to. Posted via Mobile Device

05-09-2013, 03:05 PM	#4
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me Oh okay, where in Houston you located around? I'm about 20 minutes from Downtown. __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:07 PM	#5
wittyandnitty Registered User Join Date: Apr 2013 Location: HOUSTON Posts: 17	Re: intake manifold me About the 30 minutes from downtown. Posted via Mobile Device

05-09-2013, 03:08 PM	#6
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me North or South? I'm north of downtown headed towards Clear Lake __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:09 PM	#7
wittyandnitty Registered User Join Date: Apr 2013 Location: HOUSTON Posts: 17	Re: intake manifold me Northwest Posted via Mobile Device

05-09-2013, 03:12 PM	#8
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me I bought my truck on that side of town actually funny. __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:12 PM	#9
wittyandnitty Registered User Join Date: Apr 2013 Location: HOUSTON Posts: 17	Re: intake manifold me So do ypu have an idea of where the vacuum port goes to Posted via Mobile Device

05-09-2013, 03:17 PM	#10
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me What kind of motor do you have? __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:19 PM	#11
wittyandnitty Registered User Join Date: Apr 2013 Location: HOUSTON Posts: 17	Re: intake manifold me Chevy 350 with edelbrock 4 barrel carb and intke manifold Posted via Mobile Device

05-09-2013, 03:26 PM	#12
SigFTW Registered User Join Date: Apr 2013 Location: Texas Posts: 96	Re: intake manifold me Houston Boys! I'm in Cypress. I have the Edelbrock 4 on a 350 also. Have one line going to the distrib, one plugged one to the valve cover. That will change when I redo the vacuum lines and A/C.

05-09-2013, 03:37 PM	#13
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me I'm trying to find an answer for you WittyandNitty, are you trying to find out the vacuum advance goes or just where the vacuum port goes? __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:49 PM	#17
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: intake manifold me Wittyandnitty I found this, it's for an edelbrock carb so I would imagine this could be the solution to the issue your trying to find out. http://forums.chevyhiperformance.com...rts-which-one/ __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

05-09-2013, 03:55 PM	#18
SigFTW Registered User Join Date: Apr 2013 Location: Texas Posts: 96	Re: intake manifold me I checked my pics and found one. Here is my setup, two vacuum lines are plugged, one in the back and one in the front.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.