TX Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**WIDESIDE72** · 03-23-2013, 11:44 PM

Please reply in thread, no pm's please.

All prices include ground shipping to the lower 48 states.

I prefer paypal for payment. Please send as a gift or otherwise cover their fee. Be sure to indicate what you are buying to avoid confusion on my part. Also be sure to include your address in the notes as PayPal omits the address on gift payments. I will pm the address when i get a request.

I won't be able to ship it out til Friday as I work odd days/ hours.

Hood hinges, tight pivot pins, the hood was sitting flat on the 72 truck these were pulled from $40 sold
Parchment visors with retainer clips and all screws. no rips or tears in vinyl or threads. Starting instructions intact. visors rotate smoothly on shafts. I dusted them off and held them under the water faucet for a second, so they still need clening in the photo. $40

**WIDESIDE72** · 03-23-2013, 11:50 PM

Parchment seat belts, retractors work nice, no splits or major defects on covers, just a few marks. There is no rust on the tab on the right side in the last photo. That is a reflection of Oak leaves. The chrome is very nice.

**WIDESIDE72** · 03-23-2013, 11:53 PM

I can split the buckles up from the set below to to make the nicest set. (I didn't realize I didn't have a photo of the female buckle ends only). You would get the female ends below, the complete center lap belt shown below, but instead of the retractors with the busted boots, you would get the nicer retractors above. Sold

**WIDESIDE72** · 03-23-2013, 11:59 PM

SB frame stands $30 sold

disc prop valve w/ bracket pulled from a 72 1/2 ton w/ power disc brakes $30

fender mounted distribution block, 2 to choose from $10 each

**WIDESIDE72** · 03-24-2013, 12:02 AM

painted custom 10 emblems, there doesnt appear to be any pitting (due to paint?) HAHA $20/ pair

8-350 emblems, The one on the right has a scrape, the other is nicer, $20

HSRACER · 03-24-2013, 09:53 AM

I am interested in the hinges. I can be reached at 713 410 6715. Thanks

Moline_Puller · 03-24-2013, 10:19 AM

Hi,

How much for the parchment searbelts? Shipped to Sussex, NJ (07461)

Thanks

Chris
Posted via Mobile Device

Moline_Puller · 03-24-2013, 10:30 AM

Hehe...oh, I just saw the $75...I'm interested in them. Send me a PM with payment info.

Thanks,

Chris
Posted via Mobile Device

**WIDESIDE72** · 03-24-2013, 11:10 AM

Quote:

Originally Posted by Moline_Puller

Hehe...oh, I just saw the $75...I'm interested in them. Send me a PM with payment info.

Thanks,

Chris
Posted via Mobile Device

Pm sent
Posted via Mobile Device

**WIDESIDE72** · 03-24-2013, 11:11 AM

Quote:

Originally Posted by HSRACER

I am interested in the hinges. I can be reached at 713 410 6715. Thanks

Pm sent with payment info
Posted via Mobile Device

**WIDESIDE72** · 03-24-2013, 04:17 PM

Set belts sold to moline puller
Posted via Mobile Device

**WIDESIDE72** · 03-24-2013, 04:18 PM

Feel free to make an offer on anything you see
Posted via Mobile Device
Posted via Mobile Device

**WIDESIDE72** · 03-26-2013, 07:22 AM

Hood hinges soldBto hsracer
Posted via Mobile Device

**WIDESIDE72** · 03-28-2013, 07:38 AM

Bump
Posted via Mobile Device

**WIDESIDE72** · 03-31-2013, 09:21 PM

Hood hinges sold to Hsracer
Posted via Mobile Device

**WIDESIDE72** · 05-02-2013, 10:37 PM

I still have a rough set of parchment belts, $40 shipped
Posted via Mobile Device

**D.PASSMORE** · 05-03-2013, 09:26 AM

How about a TB 350 kickdown cable?

**WIDESIDE72** · 05-03-2013, 10:03 AM

Quote:

Originally Posted by D.PASSMORE

How about a TB 350 kickdown cable?

Sorry, no
Posted via Mobile Device

burb71 · 05-03-2013, 01:23 PM

Ill take the fender mounted wire junction block, The cleaner one with no wires.
Please PM me for payment

**WIDESIDE72** · 05-12-2013, 01:02 PM

Quote:

Originally Posted by burb71

Ill take the fender mounted wire junction block, The cleaner one with no wires.
Please PM me for payment

Pm sent
Posted via Mobile Device

03-23-2013, 11:44 PM	#1
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Please reply in thread, no pm's please. All prices include ground shipping to the lower 48 states. I prefer paypal for payment. Please send as a gift or otherwise cover their fee. Be sure to indicate what you are buying to avoid confusion on my part. Also be sure to include your address in the notes as PayPal omits the address on gift payments. I will pm the address when i get a request. I won't be able to ship it out til Friday as I work odd days/ hours. Hood hinges, tight pivot pins, the hood was sitting flat on the 72 truck these were pulled from $40 sold Parchment visors with retainer clips and all screws. no rips or tears in vinyl or threads. Starting instructions intact. visors rotate smoothly on shafts. I dusted them off and held them under the water faucet for a second, so they still need clening in the photo. $40 Attached Images Last edited by WIDESIDE72; 05-02-2013 at 10:36 PM.

03-23-2013, 11:50 PM	#2
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Parchment seat belts, retractors work nice, no splits or major defects on covers, just a few marks. There is no rust on the tab on the right side in the last photo. That is a reflection of Oak leaves. The chrome is very nice. Attached Images

03-23-2013, 11:53 PM	#3
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve I can split the buckles up from the set below to to make the nicest set. (I didn't realize I didn't have a photo of the female buckle ends only). You would get the female ends below, the complete center lap belt shown below, but instead of the retractors with the busted boots, you would get the nicer retractors above. Sold Attached Images Last edited by WIDESIDE72; 03-26-2013 at 07:21 AM.

03-23-2013, 11:59 PM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve SB frame stands $30 sold disc prop valve w/ bracket pulled from a 72 1/2 ton w/ power disc brakes $30 fender mounted distribution block, 2 to choose from $10 each Attached Images Last edited by WIDESIDE72; 05-02-2013 at 10:35 PM.

03-24-2013, 12:02 AM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve painted custom 10 emblems, there doesnt appear to be any pitting (due to paint?) HAHA $20/ pair 8-350 emblems, The one on the right has a scrape, the other is nicer, $20 Attached Images

03-24-2013, 09:53 AM	#6
HSRACER Registered User Join Date: Sep 2007 Location: Katy TX Posts: 1,268	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve I am interested in the hinges. I can be reached at 713 410 6715. Thanks __________________ HSRACER Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS

03-24-2013, 10:19 AM	#7
Moline_Puller Registered User Join Date: Dec 2012 Location: Sussex, NJ Posts: 202	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Hi, How much for the parchment searbelts? Shipped to Sussex, NJ (07461) Thanks Chris Posted via Mobile Device

03-24-2013, 10:30 AM	#8
Moline_Puller Registered User Join Date: Dec 2012 Location: Sussex, NJ Posts: 202	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Hehe...oh, I just saw the $75...I'm interested in them. Send me a PM with payment info. Thanks, Chris Posted via Mobile Device

03-24-2013, 04:17 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Set belts sold to moline puller Posted via Mobile Device

03-24-2013, 04:18 PM	#12
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Feel free to make an offer on anything you see Posted via Mobile Device Posted via Mobile Device

03-26-2013, 07:22 AM	#13
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Hood hinges soldBto hsracer Posted via Mobile Device

03-28-2013, 07:38 AM	#14
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Bump Posted via Mobile Device

03-31-2013, 09:21 PM	#15
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Hood hinges sold to Hsracer Posted via Mobile Device

05-02-2013, 10:37 PM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve I still have a rough set of parchment belts, $40 shipped Posted via Mobile Device

05-03-2013, 09:26 AM	#17
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve How about a TB 350 kickdown cable? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

05-03-2013, 01:23 PM	#19
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Hood hinges, Parchment visors & seat belts, frame stands, power block, prop valve Ill take the fender mounted wire junction block, The cleaner one with no wires. Please PM me for payment

Register or Log In To remove these advertisements.