MO BBC stainles steel headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 04-28-2013, 07:02 PM

SOLD,,,, THANKS.... These are the headers we had on the Cheap Bastard truck when it was a big block. They will fit in really well as long as you don't still have that three speed manual crossmember right behind the engine block. Just do not need them anymore as we are going small block and am selling these to offset the cost of stainless ones for that build. $155.00 shipped. Thanks, Fred

vidman · 04-28-2013, 07:11 PM

Interested, what size are the tubes and the flange thickness and who makes them...And what year truck

**specialtyretail** · 04-28-2013, 08:30 PM

Hey there. Not sure who the manufacturer is. They are not Hookers or Schoefelds. I think the tubes are 1 3/4 but I can measure them and be sure Monday evening. Flange thickness is 3/8. They were on our 1968 C10.

BigDaddyV · 04-29-2013, 11:17 AM

Pm in comin

BigDaddyV · 04-29-2013, 12:17 PM

Quote:

Originally Posted by BigDaddyV

Pm in comin

due to rules, Ill get in line for them pending out come of qstion in pm.

**specialtyretail** · 04-29-2013, 01:06 PM

Quote:

Originally Posted by BigDaddyV

due to rules, Ill get in line for them pending out come of qstion in pm.

Not a problem. Got to have respect for people that follow the rules like you are. Thanks, Fred.

vidman · 04-29-2013, 02:13 PM

Hey Fred.. could you also let me know how the fit was around the motor mounts and spark plug access...Thanks Rick

**specialtyretail** · 04-29-2013, 06:40 PM

Quote:

Originally Posted by vidman

Hey Fred.. could you also let me know how the fit was around the motor mounts and spark plug access...Thanks Rick

Tube size is 1 3/4, flanges are 3/8. Spark plug access was great, nothing to it. Motor mounts weren't an issue either with this set. i made the mistake of buying a set of block huggers before i got these and butchered up a set of good stands (cosmetically, they were still structurally sound) trying to make them work. These were a breeze compared to most. Thanks, Fred.

vidman · 04-29-2013, 07:54 PM

Tube size is a little small...I,ll have to pass, These will go fast. thanks fred

**specialtyretail** · 04-29-2013, 08:19 PM

Quote:

Originally Posted by vidman

Tube size is a little small...I,ll have to pass, These will go fast. thanks fred

Not a problem. Thanks for the interest. Fred.

BigDaddyV · 04-30-2013, 06:21 AM

Pm sent Ill take them.

**specialtyretail** · 04-30-2013, 02:53 PM

Sold pending payment. Thanks, Fred.

BigDaddyV · 05-04-2013, 04:12 PM

payment sent.

**specialtyretail** · 05-04-2013, 04:43 PM

Quote:

Originally Posted by BigDaddyV

payment sent.

Got it. They should go out Monday. Thanks, Fred.

BigDaddyV · 05-04-2013, 06:46 PM

awesome. thanks

**specialtyretail** · 05-06-2013, 05:28 PM

They went out this morning. We found and included the header bolts as well. Thanks, Fred.

BigDaddyV · 05-06-2013, 05:39 PM

Awesome thanks so much Fred!

BigDaddyV · 05-11-2013, 12:23 PM

Got them in last night! Love it! Thanks Fred for the awesome headers!

**specialtyretail** · 05-11-2013, 01:06 PM

Quote:

Originally Posted by BigDaddyV

Got them in last night! Love it! Thanks Fred for the awesome headers!

Glad they are what you expected. Keep me in mind if you need anything else. Thanks, Fred.

BigDaddyV · 05-12-2013, 02:01 PM

will do Fred Thanks again

04-28-2013, 07:02 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	BBC stainles steel headers SOLD,,,, THANKS.... These are the headers we had on the Cheap Bastard truck when it was a big block. They will fit in really well as long as you don't still have that three speed manual crossmember right behind the engine block. Just do not need them anymore as we are going small block and am selling these to offset the cost of stainless ones for that build. $155.00 shipped. Thanks, Fred Attached Images Last edited by specialtyretail; 05-04-2013 at 04:44 PM.

04-28-2013, 07:11 PM	#2
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: BBC stainles steel headers Interested, what size are the tubes and the flange thickness and who makes them...And what year truck __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

04-28-2013, 08:30 PM	#3
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: BBC stainles steel headers Hey there. Not sure who the manufacturer is. They are not Hookers or Schoefelds. I think the tubes are 1 3/4 but I can measure them and be sure Monday evening. Flange thickness is 3/8. They were on our 1968 C10.

04-29-2013, 11:17 AM	#4
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers Pm in comin __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

04-29-2013, 02:13 PM	#7
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: BBC stainles steel headers Hey Fred.. could you also let me know how the fit was around the motor mounts and spark plug access...Thanks Rick __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

04-29-2013, 07:54 PM	#9
vidman Registered User Join Date: Jun 2012 Location: Fitchburg,Mass Posts: 737	Re: BBC stainles steel headers Tube size is a little small...I,ll have to pass, These will go fast. thanks fred __________________ 62 Willys 4wd Pickup : 72 C-10 swb 504 stroker 09 Taco 3" lift 33" tires: 90 K-5 blazer (plow truck): RIP Ross Little brother

04-30-2013, 06:21 AM	#11
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers Pm sent Ill take them. __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

04-30-2013, 02:53 PM	#12
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: BBC stainles steel headers Sold pending payment. Thanks, Fred.

05-04-2013, 04:12 PM	#13
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers payment sent. __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

05-04-2013, 06:46 PM	#15
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers awesome. thanks __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

05-06-2013, 05:28 PM	#16
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Re: BBC stainles steel headers They went out this morning. We found and included the header bolts as well. Thanks, Fred.

05-06-2013, 05:39 PM	#17
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers Awesome thanks so much Fred! __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

05-11-2013, 12:23 PM	#18
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers Got them in last night! Love it! Thanks Fred for the awesome headers! __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

05-12-2013, 02:01 PM	#20
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: BBC stainles steel headers will do Fred Thanks again __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.