|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-19-2013, 12:23 PM
|
#1 |
|
Registered User
Join Date: Dec 2012
Location: Arkansas
Posts: 55
|
Ole near oil filter and oil pressure switch.
Hey guys,
I'm rebuilding my 305 out of an 83, and i cant for the life of me remember if anything went into that bolt hole just above the oil pressure switch. The only reason im worried is because i cant see where the hole ends, which makes me think some kind of fluid runs to it. Any idea if the hole needs to be plugged, and what its originally for?  Posted via Mobile Device
__________________
1983 Chevy C10 LWB 305 SBC bored .030 with cast dished pistons Summit RV Camshaft 204/214 .424/.444 416 Iron Heads Performer Intake, Quadrajet, and Flowtech Long Tubes TH350 2.73 10 Bolt |
|
|
|
05-19-2013, 05:09 PM
|
#2 |
|
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: Ole near oil filter and oil pressure switch.
I just looked at both my 350's. one is plugged and it doesn't go all the way through... But my other 350 (both. 010 castings both 4 bolts) goes all the way through and is open... It's just an open hole to flywheel / bellhousing area... Hope this helps.
Posted via Mobile Device
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
