Pics of dropped pickups - The 1947 - Present Chevrolet & GMC Truck Message Board Network

newsalem2004 · 10-27-2003, 07:27 PM

Im looking to buy some dropped coils for my 69 chevy. But undecided what height to drop it. Im looking into a 4-2 drop. Can you guys show me some pics of your dropped pickups. Preferrably a 4-2 so I can see how it makes the pickup sit. That is what Im all about is stance. It has to sit right for me. Thanks

miket · 10-27-2003, 07:55 PM

May want to check in the "pictures" forum and at Early Classic Enterprises website...they have pics of various drops.

Hotrod70C10 · 10-27-2003, 10:25 PM

here's a shot of a 2/4 on my truck and then a shot of a 4/4 drop... I swaped out the 2 inch drop springs for 1 1/2 inch springs when I did the disc brake conversion. Hope this helps!

Hotrod70C10 · 10-27-2003, 10:27 PM

after

I now have the hood and cowl, cleaned up and primed

Alexis · 10-27-2003, 10:29 PM

4/6

gashog · 10-28-2003, 12:56 AM

2.5 front and 4.5 rear.

miket · 10-28-2003, 01:02 AM

Gashog thats a beautiful truck!

70short · 10-28-2003, 07:22 AM

Damn gashog I to think that is cool looking!!

70c10 · 10-28-2003, 08:17 AM

They all look good!. I need to lower mine.

TsgtE662 · 10-28-2003, 10:35 AM

Gashog - that is a real beauty! I had to save the pic for the collection! I can only dream, until mine is done. Someday.

sactoC10 · 10-28-2003, 11:54 AM

gashog,

What drop combination (parts) did you use and what tire size you have there?

hotrod70,

Same question for you.

Hotrod70C10 · 10-28-2003, 12:03 PM

sactoC10, I have in front, Mcghauy's 6 lug disc and 2 1/2 drop spidle kit. I also have Early Classic 1 1/2" drop springs in the front. For rear I have Early Classic 4" drop springs and their adjustable tracking bar. Tire sizes are 255/60/15 front and 275/60/15 rear.

**smitty62** · 10-28-2003, 03:05 PM

Hotrod;
With that setup, how does it ride and handle?

Hotrod70C10 · 10-28-2003, 03:27 PM

It rides great! I can't compare it to totally stock suspension because my springs were sagging and most of the bushings were shot before I did the swap. But with the new springs, shocks and, bushings It rides and handles smooth, instead of the jolting bangs and bumps that I used to get with the wore out stock stuff.

REDNEKID · 10-28-2003, 04:31 PM

Here is a pic of mine. I really have no idea how low it is compared to stock since it was this way when I bought it.

gashog · 10-29-2003, 01:17 AM

thanks for the complements you guys, I'm running McGaughys (www.mcgaughysclassic.com) 2.5" drop spindles and 6 lug disc brake set up, 3" drop rear coils and 1.5" lowering blocks and an ajustable track bar. I'm running 8x15 front with 255 60 tires, rears are 15x10 and 275 60,s

Keith

Hooter · 10-29-2003, 02:04 AM

dropped the front 2.5 inches

I am dropping the back four inches in time for spring, oooh I cant wait!

Gene · 10-29-2003, 09:40 AM

This is my 2.5/3 drop

sasquatch58 · 05-19-2013, 08:14 PM

by the way Kieth i mean't to ask you about the track bar..im putting the exact drop combo on my truck.was it neccesay to install the adjustible track bar or can i use the new stock one i have now..thanks again in advance...wayne

sasquatch58 · 05-19-2013, 08:27 PM

hey kieth could you post pics of the interior.i would really appreciate it,,thanks.now i will stop bugging you..{lol}.and did'nt i say you had a nice truck.{lol}

Fldawg · 05-19-2013, 08:52 PM

here's mine with 2 1/2 drop spindles and 4" coils in the rear

**Boog** · 05-19-2013, 10:23 PM

Sasquatch you do realize this is a 10 year old thread right?

sasquatch58 · 05-19-2013, 10:36 PM

yeah.but i was hoping he still tunes in .i guess i'll find out if he does'nt chime in.thanks boog for watching my back.i appeciate it.have a good night.

richards72chevy · 05-19-2013, 11:06 PM

Name: trucks034.jpg
Views: 208
Size: 96.6 KB

Name: truck%20on%20lawn%20002.jpg
Views: 205
Size: 52.3 KB

Name: TexMex0149.jpg
Views: 205
Size: 59.2 KB

10-27-2003, 07:27 PM	#1
newsalem2004 Registered User Join Date: Feb 2002 Posts: 46	Pics of dropped pickups Im looking to buy some dropped coils for my 69 chevy. But undecided what height to drop it. Im looking into a 4-2 drop. Can you guys show me some pics of your dropped pickups. Preferrably a 4-2 so I can see how it makes the pickup sit. That is what Im all about is stance. It has to sit right for me. Thanks

10-27-2003, 07:55 PM	#2
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	May want to check in the "pictures" forum and at Early Classic Enterprises website...they have pics of various drops. __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

10-27-2003, 10:25 PM	#3
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	here's a shot of a 2/4 on my truck and then a shot of a 4/4 drop... I swaped out the 2 inch drop springs for 1 1/2 inch springs when I did the disc brake conversion. Hope this helps! __________________ 70' C-10 LWB Fleetside 4.5/6 drop

10-27-2003, 10:27 PM	#4
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	after I now have the hood and cowl, cleaned up and primed __________________ 70' C-10 LWB Fleetside 4.5/6 drop

10-28-2003, 12:56 AM	#6
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	2.5 front and 4.5 rear. Attached Images __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

10-27-2003, 10:29 PM	#5
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	4/6

10-28-2003, 01:02 AM	#7
miket Registered User Join Date: Jan 2003 Location: Seattle WA Posts: 1,466	Gashog thats a beautiful truck! __________________ FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection

10-28-2003, 07:22 AM	#8
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Damn gashog I to think that is cool looking!! __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

10-28-2003, 08:17 AM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	They all look good!. I need to lower mine. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-28-2003, 10:35 AM	#10
TsgtE662 2A674 Tank Rat Join Date: Jul 2003 Location: Maryland Heights, Mo. Posts: 626	Gashog - that is a real beauty! I had to save the pic for the collection! I can only dream, until mine is done. Someday. __________________ '92 GMC Sierra, Sportside, 2wd, 350, Black '92 Chevy Silverado Extended Cab 4 x 4, Blue USAFR = 2A674 = Aircraft Fuel Systems Maintenance i.e. Tank Rat

10-28-2003, 11:54 AM	#11
sactoC10 71 DELUX Join Date: Sep 2003 Location: Northern CA / Sac Posts: 1,056	gashog, What drop combination (parts) did you use and what tire size you have there? hotrod70, Same question for you. __________________ 5/4 drop LWB wood bed - 15x8 front 235/60 - 15x10 rear 295/50 2003 FORD Escape 1998 Honda VTR1000

10-28-2003, 12:03 PM	#12
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	sactoC10, I have in front, Mcghauy's 6 lug disc and 2 1/2 drop spidle kit. I also have Early Classic 1 1/2" drop springs in the front. For rear I have Early Classic 4" drop springs and their adjustable tracking bar. Tire sizes are 255/60/15 front and 275/60/15 rear. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

10-28-2003, 03:05 PM	#13
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Hotrod; With that setup, how does it ride and handle? __________________ Stepsides look like real trucks! Smitty

10-28-2003, 03:27 PM	#14
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	It rides great! I can't compare it to totally stock suspension because my springs were sagging and most of the bushings were shot before I did the swap. But with the new springs, shocks and, bushings It rides and handles smooth, instead of the jolting bangs and bumps that I used to get with the wore out stock stuff. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

10-28-2003, 04:31 PM	#15
REDNEKID Who said that? Join Date: Aug 2003 Location: HOUSTON, TX. Posts: 106	A Little Late Here is a pic of mine. I really have no idea how low it is compared to stock since it was this way when I bought it. Attached Images



Register or Log In To remove these advertisements.

10-29-2003, 01:17 AM	#16
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	thanks for the complements you guys, I'm running McGaughys (www.mcgaughysclassic.com) 2.5" drop spindles and 6 lug disc brake set up, 3" drop rear coils and 1.5" lowering blocks and an ajustable track bar. I'm running 8x15 front with 255 60 tires, rears are 15x10 and 275 60,s Keith __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

10-29-2003, 02:04 AM	#17
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,083	dropped the front 2.5 inches I am dropping the back four inches in time for spring, oooh I cant wait! __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

10-29-2003, 09:40 AM	#18
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	This is my 2.5/3 drop Attached Images __________________ 1971 SWB 4X4 Build BOARD MEMBER #5448 BOOMER SOONER!!!!

05-19-2013, 08:14 PM	#19
sasquatch58 Registered User Join Date: Aug 2012 Location: bowie maryland Posts: 165	Re: Pics of dropped pickups by the way Kieth i mean't to ask you about the track bar..im putting the exact drop combo on my truck.was it neccesay to install the adjustible track bar or can i use the new stock one i have now..thanks again in advance...wayne

05-19-2013, 08:27 PM	#20
sasquatch58 Registered User Join Date: Aug 2012 Location: bowie maryland Posts: 165	Re: Pics of dropped pickups hey kieth could you post pics of the interior.i would really appreciate it,,thanks.now i will stop bugging you..{lol}.and did'nt i say you had a nice truck.{lol}

05-19-2013, 08:52 PM	#21
Fldawg Registered User Join Date: Jan 2011 Location: Lynn Haven Florida Posts: 1,019	Re: Pics of dropped pickups here's mine with 2 1/2 drop spindles and 4" coils in the rear Attached Images

05-19-2013, 10:23 PM	#22
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,099	Re: Pics of dropped pickups Sasquatch you do realize this is a 10 year old thread right? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

05-19-2013, 10:36 PM	#23
sasquatch58 Registered User Join Date: Aug 2012 Location: bowie maryland Posts: 165	Re: Pics of dropped pickups yeah.but i was hoping he still tunes in .i guess i'll find out if he does'nt chime in.thanks boog for watching my back.i appeciate it.have a good night.

05-19-2013, 11:06 PM	#24
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,650	Re: Pics of dropped pickups

Register or Log In To remove these advertisements.