Project "Tiffany"

[N2TRUX]

All of this while he spent several days at the hospital welcoming home his grandson. Congratulations on the new addition to the fam.

[BossHogg69]

x2 - congrats on the new grandson!

Do you have any pics on what needs to be cut out of the factory front fenders to run the Hill's Hot Rods inners?

[Hart_Rod]

Originally Posted by BossHogg69

x2 - congrats on the new grandson!

Do you have any pics on what needs to be cut out of the factory front fenders to run the Hill's Hot Rods inners?

There are some pretty good pictures posted in this thread:

http://67-72chevytrucks.com/vboard/s...d.php?t=465046

[n2billet]

Originally Posted by BucksSS

With the Vintage Air compact A/C system vs the factory heat and A/C equipment is there empty space in the center of the firewall behind the dash? Wondering if that would be a good spot for LS swappers to mount an ecm.

I put the a/c unit up as high and as close to the firewall as possible but it did leave me enough room to make a shallow glove box that could house the ecm.

Originally Posted by N2TRUX

All of this while he spent several days at the hospital welcoming home his grandson. Congratulations on the new addition to the fam.

Thank you sir......

Originally Posted by BossHogg69

x2 - congrats on the new grandson!

Do you have any pics on what needs to be cut out of the factory front fenders to run the Hill's Hot Rods inners?

I don't at this point but I'm going to try and make a template this week so I can cut my fenders and test.....I'll let you know how it goes.

[C10_ustacould]

Originally Posted by n2billet

I put the a/c unit up as high and as close to the firewall as possible but it did leave me enough room to make a shallow glove box that could house the ecm.

I built a glove box and mounted the ecm on the back of it (out of sight) but it may be in the way of the A/C unit. However, relocating the ecm to the center above the tunnel may be an option if the space is freed up. Thanks

[TXPinstriper]

Lookin good Keith ......