|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-15-2013, 09:44 PM
|
#1 |
|
Senior Member
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,049
|
Will 33x12.50's fit on a stock height 70 K20?
Came across a great deal on some 33x12.50's for my stock 16x8.25 steelies. Will they fit without any rubbing issues on my stock height 70 k20? Thanks in advance guys.
__________________
1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins |
|
|
|
05-16-2013, 02:57 AM
|
#2 |
|
Registered User
Join Date: Feb 2013
Location: Watsonville California
Posts: 47
|
Re: Will 33x12.50's fit on a stock height 70 K20?
I have 35x12.5's on a stock 69 k20 and had to notch out the front fenders about ~2.5" due to rubbing when turning. I think offset has a lot to do with it. I know its not necessarily what you were looking for but hopefully it serves as a guide as more people post.
|
|
|
|
|
05-16-2013, 12:19 PM
|
#3 |
|
Registered User
Join Date: Aug 2010
Location: Albuquerque, NM
Posts: 26
|
Re: Will 33x12.50's fit on a stock height 70 K20?
my 68 k20 has 33x12.5's and they fit fine when it was stock height. These tires are cheapo's though and are only 32" tall.
__________________
Leon '68 K20 fleetside, 400sb/sm465/np205, 4" lift, 32" tires. |
|
|
|
|
05-16-2013, 12:36 PM
|
#4 |
|
Senior Member
Join Date: Aug 2010
Location: North Alabama
Posts: 1,049
|
Re: Will 33x12.50's fit on a stock height 70 K20?
Thanks guys. Plan on doing a 2.5 inch lift eventually anyway so, if they don't fit I guess it will give me an excuse to lift it sooner
Posted via Mobile Device
__________________
1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins |
|
|
|
|
05-16-2013, 11:44 PM
|
#5 |
|
Registered User
Join Date: Oct 2007
Location: Wendell, Idaho
Posts: 608
|
Re: Will 33x12.50's fit on a stock height 70 K20?
I had 33 1250 on stock rally' s with no lift, on my 69, it was a 1/2 ton though
__________________
1969 4x4 Nothing beats a good rock drill and some dynamite |
|
|
|
|
05-19-2013, 08:28 PM
|
#6 |
|
Registered User
Join Date: Oct 2012
Location: bent mountian, virginia
Posts: 13
|
Re: Will 33x12.50's fit on a stock height 70 K20?
my k20 fit 33/12.5/16.5 groundhawgs with no rubbing stock
__________________
72 c10 frame off- put on hold 72 cheyenne 20 super -under construction 72 k10 short bed 6 inch lift- under construction 79 gmc 1 ton 4x4 plow truck |
|
|
|
|
05-20-2013, 05:58 PM
|
#7 |
|
Senior Member
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
Re: Will 33x12.50's fit on a stock height 70 K20?
They'll fit so long as the offset isn't hugely negative.
Posted via Mobile Device
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
|
|
|
|
05-20-2013, 06:14 PM
|
#8 |
|
Registered User
Join Date: Nov 2005
Location: Midland Michigan
Posts: 5
|
Re: Will 33x12.50's fit on a stock height 70 K20?
67-72's benefit from this because of the larger rounded wheelwells.
|
|
|
|
|
05-23-2013, 12:23 AM
|
#9 |
|
Registered User
Join Date: Jan 2012
Location: San Diego, CA
Posts: 25
|
Re: Will 33x12.50's fit on a stock height 70 K20?
Stock '71 K20 with flat/no arch front springs. Been running BFG all terrain 33's on 16.5 x 9.75 Kelsey Hayes steel wheels, no problem.
|
|
|
|
|
05-23-2013, 06:57 AM
|
#10 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
Re: Will 33x12.50's fit on a stock height 70 K20?
With 8.25s,no problem at all for sure. My front springs are weak and with 9.75s they "could" rub just a bit. But,wasn't an issue and did no damage to tire or fender. I did eventually change to 8.25 Vectors when I was trying to sell because I wanted to keep the wheels. Those never rubbed. Ended up selling another truck,keeping this one,and selling those wheels. Ya just never know!
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
