Napco on ebay - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972K20 · 05-25-2013, 11:19 PM

Pretty cool:

http://www.ebay.com/itm/Chevy-Napco-...33f2d5&vxp=mtr

*Peanutbutter* · 05-25-2013, 11:36 PM

I've been watching this truck for quite some time, I could really use the locking hubs off of it and some other things but this thing is rusty. Even the front axle is very pitted, I would like to have it for parts but its to far away. Look at how thin the frame is, is this typical of maine, WOW.

C10 - C90 Bill · 05-26-2013, 01:04 PM

Yeah, they use a lot of Road Salt up there. Being a former Wrecker it probably saw a lot of winter time use.

If the 24,000 miles are possibly original, it saw a whole lot of winter time use.

Bill

**special-K** · 05-26-2013, 09:36 PM

Yeah,seen that before a while back,too,but thanks for posting. Damn shame about the rust worms.

Here's the one I saw recently that I wish I coulda bought. What a truck for it's time!

alsriv2 · 05-28-2013, 12:29 PM

Quote:

Originally Posted by special-K

Yeah,seen that before a while back,too,but thanks for posting. Damn shame about the rust worms.

Here's the one I saw recently that I wish I coulda bought. What a truck for it's time!

I think this one had an automatic trans in it if I remember right.

As for the Ebay listing, I grew up in Maine and most all the older vehicles got eaten alive by the salt gremlins. Even if the body somehow survived, the frames were too far gone to fix. I had an old '70 Dodge D200 up there that I had to replace 3 cross members on once to pass yearly inspection.

**richard2717** · 05-28-2013, 06:37 PM

Dang Tim is that one for sale?

jjzepplin · 05-28-2013, 06:47 PM

Quote:

Originally Posted by special-K

Yeah,seen that before a while back,too,but thanks for posting. Damn shame about the rust worms.

Here's the one I saw recently that I wish I coulda bought. What a truck for it's time!

That looks tough! Me likey!

**special-K** · 05-29-2013, 06:44 AM

Yeah Richard, it was. I think it was Craigslist. That one had an Allison and a Toroflow. Ok, we may not be so fond of that motor in hind sight. But, back then? It's a truck for today ordered over 40 years ago*. I never saw an Napco conversion on an automatic before. I'd be pokin' a 4-53 in that husky thang and have just what the doctor ordered

. I'm not sure how that motor would like working with the automatic,though.

*I still prefer rowin' but the unusual nature is cool

05-25-2013, 11:19 PM	#1
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Napco on ebay Pretty cool: http://www.ebay.com/itm/Chevy-Napco-...33f2d5&vxp=mtr

05-25-2013, 11:36 PM	#2
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: Napco on ebay I've been watching this truck for quite some time, I could really use the locking hubs off of it and some other things but this thing is rusty. Even the front axle is very pitted, I would like to have it for parts but its to far away. Look at how thin the frame is, is this typical of maine, WOW.

05-26-2013, 01:04 PM	#3
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,087	Re: Napco on ebay Yeah, they use a lot of Road Salt up there. Being a former Wrecker it probably saw a lot of winter time use. If the 24,000 miles are possibly original, it saw a whole lot of winter time use. Bill __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

05-26-2013, 09:36 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Napco on ebay Yeah,seen that before a while back,too,but thanks for posting. Damn shame about the rust worms. Here's the one I saw recently that I wish I coulda bought. What a truck for it's time! Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-28-2013, 06:37 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Napco on ebay Dang Tim is that one for sale? __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-29-2013, 06:44 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Napco on ebay Yeah Richard, it was. I think it was Craigslist. That one had an Allison and a Toroflow. Ok, we may not be so fond of that motor in hind sight. But, back then? It's a truck for today ordered over 40 years ago. I never saw an Napco conversion on an automatic before. I'd be pokin' a 4-53 in that husky thang and have just what the doctor ordered . I'm not sure how that motor would like working with the automatic,though. I still prefer rowin' but the unusual nature is cool __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.