Door Window part question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64GMCHorsepower · 05-29-2013, 10:47 AM

I have a 1964 GMC Fleetside.

Inside the drivers door, there is a metal rail that the window felt lays in and lets the door slide up and down. It is bolted to the door in 2 places, top and bottom. It is on the end of the door that has the door handle on it, not on the hinge side of the door. Mine broke at the bottom bolt, and now when I roll my window down, it slides out of the felt, does not align, and its a major PITA to get the window back up.

Is this called the division bar? I really could not find a good pic anywhere of it in the LMC catalog, so I'm hoping someone here can help.

Thanks,

Chad

63burban · 05-29-2013, 10:54 AM

Rear glass guide, not reproduced. If the two pieces are there it can be welded back together. I have several in parts trucks but I have repaired them before no problem.

64GMCHorsepower · 05-29-2013, 04:32 PM

Just awesome....Well, at least I can weld. I guess I'll have to take it apart and fix it.

Thanks for the help 63burban!

ChuckW · 05-29-2013, 05:47 PM

That part is eaisly removed for repair..... Your felt window runner may be a different story though???

64GMCHorsepower · 05-30-2013, 07:13 PM

I got the piece out, and took it to work. Our welder is going to TIG it for me, since I only weld sometimes, and he does it for a living....

It being thin metal, I thought it best not to MIG it.

05-29-2013, 10:47 AM	#1
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Door Window part question I have a 1964 GMC Fleetside. Inside the drivers door, there is a metal rail that the window felt lays in and lets the door slide up and down. It is bolted to the door in 2 places, top and bottom. It is on the end of the door that has the door handle on it, not on the hinge side of the door. Mine broke at the bottom bolt, and now when I roll my window down, it slides out of the felt, does not align, and its a major PITA to get the window back up. Is this called the division bar? I really could not find a good pic anywhere of it in the LMC catalog, so I'm hoping someone here can help. Thanks, Chad __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

05-29-2013, 10:54 AM	#2
63burban Chevy addict Join Date: May 2012 Location: Iron Ridge, WI Posts: 1,085	Re: Door Window part question Rear glass guide, not reproduced. If the two pieces are there it can be welded back together. I have several in parts trucks but I have repaired them before no problem.

05-29-2013, 04:32 PM	#3
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Door Window part question Just awesome....Well, at least I can weld. I guess I'll have to take it apart and fix it. Thanks for the help 63burban! __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

05-29-2013, 05:47 PM	#4
ChuckW Registered User Join Date: Mar 2011 Location: Alameda, CA. Posts: 173	Re: Door Window part question That part is eaisly removed for repair..... Your felt window runner may be a different story though???

05-30-2013, 07:13 PM	#5
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Door Window part question I got the piece out, and took it to work. Our welder is going to TIG it for me, since I only weld sometimes, and he does it for a living.... It being thin metal, I thought it best not to MIG it. __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.