89 Blazer Seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dallred · 05-06-2013, 06:39 PM

I just got a 89 Blazer. It is awesome.... I need one more seat so i can fit the entire family. I want to put a bench seat up front. Anyone done this? What vehicle would be a suitable donor? I want it to be as easy of a swap as I can.
Thanks
David

tobiahr · 05-07-2013, 04:11 AM

I currently have what adds up to a split bench in mine. the 2 front buckets from a 00 Tahoe and the center console/ jump seat from a 90's Silverado crew cab. I had to drill a couple of holes in the floor to add nuts to hold it down but, I've also seen people adapt the adjusters instead. either way not that difficult. you could probably pass with just the center console / jump seat option. mine even came with its own seat belt

blazer2007 · 05-07-2013, 10:14 AM

I,m just finishing mine but I had to make all new brackets.wasn,t hard, a afternoons work.I like the old look bench in mine

Outlaw86 · 05-07-2013, 10:27 AM

I bought mine with a 40/20/40 qualitex unit in the front of mine;

**special-K** · 05-08-2013, 11:09 PM

Just built-in a pickup or Suburban seat from a square body. Use the two outer brackets from your buckets

Low87 · 05-09-2013, 04:43 PM

01+ Silverado/Sierra 40/20/40 will give you an extra seat up front & won't make everyone get out to let someone in the back (as a bench would).

Ski-me · 05-14-2013, 08:05 PM

Quote:

Originally Posted by Low87

01+ Silverado/Sierra 40/20/40 will give you an extra seat up front & won't make everyone get out to let someone in the back (as a bench would).

I'd do this. They are more rare (I believe) but are comfortable too. My dad had a set in his early Tahoe and they were nice.

dallred · 05-14-2013, 08:44 PM

Right on. I just need to find one of the 40\20\40 seats.

tobiahr · 05-14-2013, 10:40 PM

http://qualitex.com/

RoughKuntry · 05-26-2013, 07:16 AM

I have a 1979 High Sierra Jimmy with a Custom Job, I hold up to 8 People, legally with seat belt for everyone. I cut the floor from the back of the rig over the gas tank and put in a 87 Suburban back seat, then welded the other floor into my rig. Went from a 6 Passenger to an 8. I'll get you some pictures.

_______________________
73 GMC 2500
79 GMC High Sierra Jimmy
84 Chevy Dully

dallred · 05-26-2013, 11:09 AM

T Rokk That sounds like a nice setup.
Looking forward to pictures

RoughKuntry · 05-27-2013, 08:43 AM

Here ya Go, Dallred, Below is a video. well The Link is

http://s1192.photobucket.com/user/To...af7aa.mp4.html
Back Bench Seat

Middle Seat

Front Seats with Console

LH Side Rough Country Suspension Lift 6" 38x15.50R16 Aluminum Alloy Rims

72shorbox · 06-01-2013, 12:37 PM

Dallred, did you get a bench seat for your blazer? If you have the factory buckets I may have a seat that would interest you. maybe we could make some kind of trade. PM me if you are interested.

05-06-2013, 06:39 PM	#1
dallred Registered User Join Date: May 2013 Location: tremonton Utah Posts: 28	89 Blazer Seat I just got a 89 Blazer. It is awesome.... I need one more seat so i can fit the entire family. I want to put a bench seat up front. Anyone done this? What vehicle would be a suitable donor? I want it to be as easy of a swap as I can. Thanks David

05-07-2013, 04:11 AM	#2
tobiahr Registered User Join Date: Nov 2007 Location: Lincoln NE Posts: 513	Re: 89 Blazer Seat I currently have what adds up to a split bench in mine. the 2 front buckets from a 00 Tahoe and the center console/ jump seat from a 90's Silverado crew cab. I had to drill a couple of holes in the floor to add nuts to hold it down but, I've also seen people adapt the adjusters instead. either way not that difficult. you could probably pass with just the center console / jump seat option. mine even came with its own seat belt __________________ Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=511830

05-07-2013, 10:14 AM	#3
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: 89 Blazer Seat I,m just finishing mine but I had to make all new brackets.wasn,t hard, a afternoons work.I like the old look bench in mine Attached Images

05-07-2013, 10:27 AM	#4
Outlaw86 Registered User Join Date: Mar 2013 Location: 843, SC Posts: 16	Re: 89 Blazer Seat I bought mine with a 40/20/40 qualitex unit in the front of mine;

05-08-2013, 11:09 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: 89 Blazer Seat Just built-in a pickup or Suburban seat from a square body. Use the two outer brackets from your buckets __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-09-2013, 04:43 PM	#6
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Re: 89 Blazer Seat 01+ Silverado/Sierra 40/20/40 will give you an extra seat up front & won't make everyone get out to let someone in the back (as a bench would). __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

05-14-2013, 08:44 PM	#8
dallred Registered User Join Date: May 2013 Location: tremonton Utah Posts: 28	Re: 89 Blazer Seat Right on. I just need to find one of the 40\20\40 seats.

05-14-2013, 10:40 PM	#9
tobiahr Registered User Join Date: Nov 2007 Location: Lincoln NE Posts: 513	Re: 89 Blazer Seat http://qualitex.com/ __________________ Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=511830

05-26-2013, 07:16 AM	#10
RoughKuntry Registered User Join Date: Mar 2013 Location: Washington Posts: 238	Re: 89 Blazer Seat I have a 1979 High Sierra Jimmy with a Custom Job, I hold up to 8 People, legally with seat belt for everyone. I cut the floor from the back of the rig over the gas tank and put in a 87 Suburban back seat, then welded the other floor into my rig. Went from a 6 Passenger to an 8. I'll get you some pictures. _______________________ 73 GMC 2500 79 GMC High Sierra Jimmy 84 Chevy Dully __________________ RoughKuntry 73 GMC 25 HUNDRED :Sold 79 GMC High Sierra 4x4 (Ma-Duece) :Sold 99 Chevrolet LS 4.8l/5 Speed Manual 4x4 :Selling 88 Chevrolet Burban 2500 4x4 :Buying

05-26-2013, 11:09 AM	#11
dallred Registered User Join Date: May 2013 Location: tremonton Utah Posts: 28	Re: 89 Blazer Seat T Rokk That sounds like a nice setup. Looking forward to pictures

05-27-2013, 08:43 AM	#12
RoughKuntry Registered User Join Date: Mar 2013 Location: Washington Posts: 238	Re: 89 Blazer Seat Here ya Go, Dallred, Below is a video. well The Link is http://s1192.photobucket.com/user/To...af7aa.mp4.html Back Bench Seat Middle Seat Front Seats with Console LH Side Rough Country Suspension Lift 6" 38x15.50R16 Aluminum Alloy Rims __________________ RoughKuntry 73 GMC 25 HUNDRED :Sold 79 GMC High Sierra 4x4 (Ma-Duece) :Sold 99 Chevrolet LS 4.8l/5 Speed Manual 4x4 :Selling 88 Chevrolet Burban 2500 4x4 :Buying Last edited by RoughKuntry; 05-27-2013 at 08:57 AM.

06-01-2013, 12:37 PM	#13
72shorbox Registered User Join Date: Sep 2009 Location: Clinton, ut Posts: 63	Re: 89 Blazer Seat Dallred, did you get a bench seat for your blazer? If you have the factory buckets I may have a seat that would interest you. maybe we could make some kind of trade. PM me if you are interested.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.