Does one of these exist ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Steve Cole · 05-31-2013, 09:27 PM

I'm looking for a gas tank that will fit between the frame rails with a filler neck that you can access from behind the license plate like the 69 camaro tank. Something that doesn't cost a fortune either. Is there such a thing??

Thanks.
Posted via Mobile Device

SS Tim · 05-31-2013, 10:03 PM

Do a search for "camaro tank". There are a couple of installations like that IIRC using a 69 Camaro tank.

**Boog** · 06-01-2013, 06:31 AM

I think Ryan Manson just did a camaro tank install on his truck in Custom Classic Trucks magazine. Just a couple months back. Rear filler neck and all.

jondancer · 06-01-2013, 06:33 AM

It has to sit under the frame to be filled at the license plate.
Posted via Mobile Device

ChevLoRay · 06-01-2013, 10:53 AM

Quote:

Originally Posted by Boog

I think Ryan Manson just did a camaro tank install on his truck in Custom Classic Trucks magazine. Just a couple months back. Rear filler neck and all.

Get a copy of the April 2013 issue of Custom Classic Trucks magazine. Turn to page 10. If a picture is worth 10,000 words, then there are almost a quarter-million words worth of pictures, plus the written words in that "how-to". He started with an Aeromotive, Inc "Stealth" tank for an F-body (67-69 Camaro/Firebird). The link is to their website. They show tanks for '67-8, and a tank for a '69. My old '67 Firebird had the type tank you want. You just have to remember that any tanks that old and unused, are probably worse than the tank in your cab, since the F-body tanks are beneath the body and closer to the ground (and moisture) so rust in/out may be an issue.

http://aeromotiveinc.com/products-pa...lth-fuel-tank/

Steve Cole · 06-01-2013, 09:00 PM

Quote:

Originally Posted by jondancer

It has to sit under the frame to be filled at the license plate.
Posted via Mobile Device

Thanks, I was afraid of that.
Posted via Mobile Device

diabloceto · 06-01-2013, 09:10 PM

http://www.customclassictrucks.com/t..._tank_install/

Steve Cole · 06-04-2013, 09:05 AM

I saw that article. I like the idea but I don't like how low the tank has to sit in order to get the fill neck to be at the license plate area. My filler neck is in the wood bed and I hate that. Just looking for another option. I guess there are only so many places to put it in a stepper.

05-31-2013, 09:27 PM	#1
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Does one of these exist ??? I'm looking for a gas tank that will fit between the frame rails with a filler neck that you can access from behind the license plate like the 69 camaro tank. Something that doesn't cost a fortune either. Is there such a thing?? Thanks. Posted via Mobile Device

05-31-2013, 10:03 PM	#2
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Does one of these exist ??? Do a search for "camaro tank". There are a couple of installations like that IIRC using a 69 Camaro tank. __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

06-01-2013, 06:31 AM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,531	Re: Does one of these exist ??? I think Ryan Manson just did a camaro tank install on his truck in Custom Classic Trucks magazine. Just a couple months back. Rear filler neck and all. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

06-01-2013, 06:33 AM	#4
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,194	Re: Does one of these exist ??? It has to sit under the frame to be filled at the license plate. Posted via Mobile Device

06-01-2013, 09:10 PM	#7
diabloceto Registered User Join Date: Dec 2010 Location: Byron, Ga Posts: 92	Re: Does one of these exist ??? http://www.customclassictrucks.com/t..._tank_install/

06-04-2013, 09:05 AM	#8
Steve Cole Registered User Join Date: May 2012 Location: Faith,NC Posts: 1,626	Re: Does one of these exist ??? I saw that article. I like the idea but I don't like how low the tank has to sit in order to get the fill neck to be at the license plate area. My filler neck is in the wood bed and I hate that. Just looking for another option. I guess there are only so many places to put it in a stepper.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.