OR 100's of misc parts from the last 6 trucks parted out

[Lazzardkng]

Lazzardkng
Registered User

Join Date: Aug 2011
Location: Kalama Wa
Looking for 1970 chev grille in good condition
Posted via Mobile Device
__________________
1970 Chevrolet + 2003 GMC Duramax 4x4 = Awesome
Posted via Mobile Device

[Hard_Rain420]

I'm looking for a pair of 69-70 amber reflector markers. How much shipped? They have to be in good condition w/o any fading or cracks. I'll have to check I might need two amber pairs.

[tll74]

Originally Posted by downbytheriver

How many 8" 6-lug truck Rallye wheels do you have left, if any?

Probably 25 or so..

Originally Posted by 1967BURB

Do you still have the right side 2wd exhaust manifold? How much shipped to 28023?

Yes, shipping cost to come first of the week

Originally Posted by Lazzardkng

Lazzardkng
Registered User

Join Date: Aug 2011
Location: Kalama Wa
Looking for 1970 chev grille in good condition
Posted via Mobile Device
__________________
1970 Chevrolet + 2003 GMC Duramax 4x4 = Awesome
Posted via Mobile Device

I have a nice inner and a driver quality outer. The outer is in a truck that I may fix up so it is pending.

Originally Posted by Hard_Rain420

I'm looking for a pair of 69-70 amber reflector markers. How much shipped? They have to be in good condition w/o any fading or cracks. I'll have to check I might need two amber pairs.

I should have but can't check till Monday.

Sorry for the delay. Been offline for vacation.
Thanks, Tom

[cudaman]

Tom:
I see this it is an old post, just checking to see if you have a few things left.
1- RH outside door handle with screws
2- 1 window crank handle
3- Windshield washer hose set, Does this come with the rubber groumet

[Lazzardkng]

If you come across a good outer 70 grill let me know. I have a driver quality one now but need a nice one.
Posted via Mobile Device

[69SCSS]

Hey Tom,

Wondering if you have 67-71 BB mounts? I have the stands but I need the other hardware (pad, sleeve, bolt, washers). let me know if you do and what you'd want for them.

Thanks, Al

[HuntUSMC]

Do any of the ashtrays have sliders instead of ball bearings (72)?

May I get a quote for a telescopic antennae and an ashtray to 72758?

Thanks in advance!
Posted via Mobile Device

[Evaded]

pmd....

[tll74]

Originally Posted by Hard_Rain420

I'm looking for a pair of 69-70 amber reflector markers. How much shipped? They have to be in good condition w/o any fading or cracks. I'll have to check I might need two amber pairs.

15.00 for a pair of nice ones. 8.00 shipping.

Originally Posted by cudaman

Tom:
I see this it is an old post, just checking to see if you have a few things left.
1- RH outside door handle with screws
2- 1 window crank handle
3- Windshield washer hose set, Does this come with the rubber groumet

RH outer handle 15.00, window crank handle 2.50, washer hose w/groumet 12.50. 15.00 shipping

Originally Posted by Lazzardkng

If you come across a good outer 70 grill let me know. I have a driver quality one now but need a nice one.
Posted via Mobile Device

Will do.

Originally Posted by 69SCSS

Hey Tom,

Wondering if you have 67-71 BB mounts? I have the stands but I need the other hardware (pad, sleeve, bolt, washers). let me know if you do and what you'd want for them.

Thanks, Al

Sorry just the stands at this time.

Originally Posted by HuntUSMC

Do any of the ashtrays have sliders instead of ball bearings (72)?

May I get a quote for a telescopic antennae and an ashtray to 72758?

Thanks in advance!
Posted via Mobile Device

Yes, I have many of the plastic slide ashtrays. 15.00 with the mount bracket 6.00 shipping.
No antenna right now.

Thanks, Tom

[69 MOD]

I'm looking for a heater control in black or chrome

Do you still have any of tail light harnesses left?

[tll74]

Originally Posted by 69 MOD

I'm looking for a heater control in black or chrome

Do you still have any of tail light harnesses left?

40.00 plus shipping on a chrome one and yes on the tail light harness (from firewall to bumper). Thanks, Tom

[69 MOD]

PM sent...

[valentini]

Is there any chance you have the filler panel that attaches to the top of a 67-68 GMC grill? If so, I am interested in buying it. If not, do you know who might have one for me?

Thank you,
Ed

[HuntUSMC]

Thanks for the response "Re: ashtray and antennae"...I actually found one while you were away.

Sorry if any inconvenience. Thanks again!
Posted via Mobile Device

[mikegrauer]

any complete ignition switches with bezzle and a key? k10 front driveshaft? 71

[tll74]

Originally Posted by valentini

Is there any chance you have the filler panel that attaches to the top of a 67-68 GMC grill? If so, I am interested in buying it. If not, do you know who might have one for me?

Thank you,
Ed

Ed, Sorry, I don't have one separate from a grill at this time. Check with teeitup he may have one.

Originally Posted by mikegrauer

any complete ignition switches with bezzle and a key? k10 front driveshaft? 71

Yes, 40.00 for ign switch assy with the matching door clyinders. 25.00 w/o door clyinders. 6.00 shipping


Thanks, Tom

[swamp rat]

Do you have any short water pump pulleys for a 350?

[tll74]

Originally Posted by swamp rat

Do you have any short water pump pulleys for a 350?

Yes, single or double groove on both crank and water pump? Do you need the P/S pulley? What year are you working on?

[swamp rat]

72 chev 350, short water pump

What i need is a 1.5 bolt pattern ctr to ctr, back space is 2.75 measured from the inside of the pulley where it contacts the water pump flange to the back edge of the pulley, diameter will be about 6.25 or a little larger.

It can be single or double groove but not running air conditioning.

definitely need a water pump pulley but also interested in the whole set, how much for just the water pump pulley? and how much for a complete set including crank and P/S pulley's?

[tll74]

Originally Posted by swamp rat

72 chev 350, short water pump

What i need is a 1.5 bolt pattern ctr to ctr, back space is 2.75 measured from the inside of the pulley where it contacts the water pump flange to the back edge of the pulley, diameter will be about 6.25 or a little larger.

It can be single or double groove but not running air conditioning.

definitely need a water pump pulley but also interested in the whole set, how much for just the water pump pulley? and how much for a complete set including crank and P/S pulley's?

I have the water pump single groove pulley, matching single groove crank, and crank shaft P/S pulley. P/S pulley would be the steel pulley which is correct for the 71-72. I do have the 70-down P/S cast iron pulley if needed. 47.50 shipped on all three. Thanks, Tom

[swamp rat]

Originally Posted by tll74

I have the water pump single groove pulley, matching single groove crank, and crank shaft P/S pulley. P/S pulley would be the steel pulley which is correct for the 71-72. I do have the 70-down P/S cast iron pulley if needed. 47.50 shipped on all three. Thanks, Tom

Did these come off the same engine?

Long as there in good shape and for a short water pump then I'll take the set.

[Don Brace]

looking for the splash guards that mount on the bed behind the rear tires. Only need the passenger side but will take a pair if necessary.
Thanks
Don Brace MN

[swamp rat]

Originally Posted by tll74

I have the water pump single groove pulley, matching single groove crank, and crank shaft P/S pulley. P/S pulley would be the steel pulley which is correct for the 71-72. I do have the 70-down P/S cast iron pulley if needed. 47.50 shipped on all three. Thanks, Tom

PM Sent last night. Need pmt info.

[tll74]

Originally Posted by Don Brace

looking for the splash guards that mount on the bed behind the rear tires. Only need the passenger side but will take a pair if necessary.
Thanks
Don Brace MN

Yes I have both or just the RH. Acid dipped, media blasted and ready for paint. 25.00 each plus shipping. Probably about 15.00 shipping.

Originally Posted by swamp rat

Did these come off the same engine?
Long as there in good shape and for a short water pump then I'll take the set.

PM returned. Yes they would be off the same engine, a 72 C20 350. Just to be clear this would be three pulleys: water pump, crank pulley for water pump and alt, and P/S pulley on the crank.


Thanks, Tom

[docflower]

Hey
Looking for a couple of items for 72 c20 Lwb...

Tan steering wheel
White with blue dog dishes
Tow hooks
Under bed spare assembly

And can you please take a couple of photos of the white mirrors?
84401

Cheers
Posted via Mobile Device