The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-20-2013, 05:27 PM   #1
ozkiwi
Registered User
 
Join Date: Nov 2012
Location: melbourne australia
Posts: 196
Running cold.Correct thermostat fan switch combination?

I have a new 330hp crate motor and a champion 2 row 1inch tube radiator with twin 14 inch thermo fans mounted in a shroud.For some reason the guy who installed the motor paired a 160 thermostat with a 160 turn on fan switch and the motor never runs past 140 in normal driving and fans kick in city driving so it never goes past 150 on the dial.
I have ordered a 180 thermostat with a fan switch that kicks on at 200 and off at 185 is that the correct combination?
The mechanic who installed the motor said SBC like to run cool but I cannot find any support for that theory anywhere on the internet.
ozkiwi is offline   Reply With Quote
Old 06-20-2013, 07:28 PM   #2
LONGHAIR
just can't cover up my redneck
 
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
Re: Running cold.Correct thermostat fan switch combination?

Sounds like you are on the right track......ignore the "cool guy".
It needs to get hot enough to "burn off" any condensation that can build up internally. The heat and a properly functioning PCV system work together to remove the vapor that can become sludge.
__________________
You can review the site's rules here.



Quote:
Originally Posted by Longhorn Man View Post
As for reading directions...
The directions are nothing but another man's opinion.
Learn from the mistakes of others, you won't live long enough to make them all yourself...

Bad planning on your part does not necessarily constitute an instant emergency on my part....

The great thing about being a pessimist is that you are either pleasantly surprised or right.
LONGHAIR is offline   Reply With Quote
Old 06-20-2013, 07:42 PM   #3
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: Running cold.Correct thermostat fan switch combination?

+1
Rufton is offline   Reply With Quote
Old 06-21-2013, 01:10 AM   #4
ozkiwi
Registered User
 
Join Date: Nov 2012
Location: melbourne australia
Posts: 196
Re: Running cold.Correct thermostat fan switch combination?

Thanks .I only became concerned when the run in oil i changed after 300 miles was really black.
ozkiwi is offline   Reply With Quote
Old 06-21-2013, 09:09 AM   #5
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: Running cold.Correct thermostat fan switch combination?

PCV and t-stat could be defective; not much to replace both.
Where is fan switch?
Rufton is offline   Reply With Quote
Old 06-21-2013, 07:42 PM   #6
ozkiwi
Registered User
 
Join Date: Nov 2012
Location: melbourne australia
Posts: 196
Re: Running cold.Correct thermostat fan switch combination?

Quote:
Originally Posted by Rufton View Post
PCV and t-stat could be defective; not much to replace both.
Where is fan switch?
thermostat is new fan switch new and on inlet manifold.
ozkiwi is offline   Reply With Quote
Old 06-21-2013, 10:10 PM   #7
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: Running cold.Correct thermostat fan switch combination?

Quote:
Originally Posted by ozkiwi View Post
I have ordered a 180 thermostat with a fan switch that kicks on at 200 and off at 185 is that the correct combination?
This works for me:
I like the adjustable thermostatic fan control w/ radiator drain port thermocouple probe (actually have redundant overkill fan control but thats another story). Lower radiator should be free of steam and provide a stable reference point. Mine has been reliable since 1998. I prefer 195F t-stat. I like to have the flexibility of tuning fan set point. It is likely one of those ask 10 people get 10 answers kinda thing.

I think your setup w/ TC on intake manifold will work. My intake typically runs 195F per IR gun. Yours may run 180 on hwy and 185-200 at red light. Lot of people roll like that; I just prefer a little more heat to help drive off condensate and have seen data to support somewhat lower wear at 195.
Rufton is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com