MN Original 72 2wd blazer chassis, roll bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 05-23-2013, 08:31 AM

I got this a few years ago and intended to use it for a future project, but changed my mind. Its been sandblasted and painted, rear frame horns replaced, axle is an open 12 bolt with fairly new brakes and 3.73 gears that I had in my C-10, front suspension is in good condition. $500 Sold

Roll bar was taken out of a 69-71 blazer. I will post pics tonight. $125 SOLD

I am located in Sleepy Eye, MN which is south central. Couple hour drive from the twin cities, about 2.5 hours from Sioux Falls, about 4 hours from Des Moines.

I also have a lot of truck body parts listed for sale on the truck board.

**Thealien** · 05-23-2013, 09:59 AM

If only you were closer!! Or good thing you're not?

Good luck shouldn't last long.

**DREW67** · 05-23-2013, 10:08 AM

Do you have a title and vin tag for the frame?

boonedogs72 · 05-23-2013, 10:19 AM

Yep wish you were out in ca....
Posted via Mobile Device

hgs_notes · 05-23-2013, 04:01 PM

Quote:

Originally Posted by DREW67

Do you have a title and vin tag for the frame?

I have a title and VIN plate for a 4x4 body.
Posted via Mobile Device

larryd · 05-26-2013, 11:35 PM

is the roll bar the same that would be in a 72?

hgs_notes · 05-27-2013, 12:51 AM

Quote:

Originally Posted by larryd

is the roll bar the same that would be in a 72?

Yes. And I can deliver it to you week after next. I'll be heading down to the St Louis area to visit some friends and planned on taking Hwy 61 to Hannibal. I have some tailgates I'm already hauling with me. I will post pics tomorrow.

briank · 05-27-2013, 10:37 AM

Hgs notes what route are you taking? Didnt know if you would be coming close to me or not? May be interested in the roll bar
Posted via Mobile Device

briank · 05-27-2013, 10:38 AM

Just read all posts, taking highway 61....duh
Posted via Mobile Device

hgs_notes · 05-27-2013, 11:14 AM

Roll bar pics now in the first post.

trucks72 · 06-03-2013, 12:02 PM

I will take the roll bar if you would ship it. I will pay shipping.

hgs_notes · 06-03-2013, 01:52 PM

Quote:

Originally Posted by trucks72

I will take the roll bar if you would ship it. I will pay shipping.

The only way I could ship it would be by greyhound to Knoxville. That would cost $85. And I wouldn't have time to do it until next week.

trucks72 · 06-04-2013, 03:06 PM

I will take it. Pm sent

hgs_notes · 06-26-2013, 01:28 PM

Chassis still available. Also gonna try ebay cause I need to get it out of the yard.

da-burb · 06-26-2013, 04:27 PM

Mike, are you going to be around this weekend? I am going to be in Springfield one day and can take a look.
Posted via Mobile Device

hgs_notes · 06-26-2013, 05:42 PM

Quote:

Originally Posted by da-burb

Mike, are you going to be around this weekend? I am going to be in Springfield one day and can take a look.
Posted via Mobile Device

PM sent. Even if I'm not here you can stop and look. It's in the backyard by the alley. I'll text you my address if we don't talk before then.

05-23-2013, 08:31 AM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Original 72 2wd blazer chassis, roll bar I got this a few years ago and intended to use it for a future project, but changed my mind. Its been sandblasted and painted, rear frame horns replaced, axle is an open 12 bolt with fairly new brakes and 3.73 gears that I had in my C-10, front suspension is in good condition. $500 Sold Roll bar was taken out of a 69-71 blazer. I will post pics tonight. $125 SOLD I am located in Sleepy Eye, MN which is south central. Couple hour drive from the twin cities, about 2.5 hours from Sioux Falls, about 4 hours from Des Moines. I also have a lot of truck body parts listed for sale on the truck board. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 07-06-2013 at 10:34 PM.

05-23-2013, 09:59 AM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: Original 72 2wd blazer chassis, roll bar If only you were closer!! Or good thing you're not? Good luck shouldn't last long. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

05-23-2013, 10:08 AM	#3
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: Original 72 2wd blazer chassis, roll bar Do you have a title and vin tag for the frame? __________________ DREW67

05-23-2013, 10:19 AM	#4
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: Original 72 2wd blazer chassis, roll bar Yep wish you were out in ca.... Posted via Mobile Device

05-26-2013, 11:35 PM	#6
larryd Registered User Join Date: Apr 2007 Location: quincy il Posts: 44	Re: Original 72 2wd blazer chassis, roll bar is the roll bar the same that would be in a 72?

05-27-2013, 10:37 AM	#8
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Original 72 2wd blazer chassis, roll bar Hgs notes what route are you taking? Didnt know if you would be coming close to me or not? May be interested in the roll bar Posted via Mobile Device

05-27-2013, 10:38 AM	#9
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: Original 72 2wd blazer chassis, roll bar Just read all posts, taking highway 61....duh Posted via Mobile Device

05-27-2013, 11:14 AM	#10
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Original 72 2wd blazer chassis, roll bar Roll bar pics now in the first post. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

06-03-2013, 12:02 PM	#11
trucks72 trucks72 Join Date: Jul 2002 Location: Crossville Posts: 315	Re: Original 72 2wd blazer chassis, roll bar I will take the roll bar if you would ship it. I will pay shipping.

06-04-2013, 03:06 PM	#13
trucks72 trucks72 Join Date: Jul 2002 Location: Crossville Posts: 315	Re: Original 72 2wd blazer chassis, roll bar I will take it. Pm sent

06-26-2013, 01:28 PM	#14
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Original 72 2wd blazer chassis, roll bar Chassis still available. Also gonna try ebay cause I need to get it out of the yard. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

06-26-2013, 04:27 PM	#15
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: Original 72 2wd blazer chassis, roll bar Mike, are you going to be around this weekend? I am going to be in Springfield one day and can take a look. Posted via Mobile Device __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.