NC Driveshafts, long and short - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GCncsuHD · 06-10-2013, 04:23 PM

I have four driveshafts for sale.

From left to right
Two piece longbed drive shaft with HD carrier bearing $Sold
Two piece longbed drive shaft $Sold
Two piece shortbed drive shaft $Sold
One piece shortbed drive shaft $100

Prices are local pickup, shipping would be added to the price above.
I can get measurements by request.

ecgate · 06-10-2013, 09:01 PM

Can you get me the measurement of the one piece drive shaft. And how much shipped to 51503.

Bhelton · 06-10-2013, 09:10 PM

$30 for short bed 2 piece? I'll take it
Posted via Mobile Device

GCncsuHD · 06-10-2013, 10:48 PM

Quote:

Originally Posted by ecgate

Can you get me the measurement of the one piece drive shaft. And how much shipped to 51503.

The one piece is 55" center of u-joint to center of u-joint, and 60.5" from center of u-joint to the tip of the yoke. Let me know if you need any other measurements. I just happen to have a large cardboard tube that it will fit in if I take the yoke off (and pack it down inside the tube with the shaft). I will have to check on shipping and I'll get back to you.

Quote:

Originally Posted by Bhelton

$30 for short bed 2 piece? I'll take it
Posted via Mobile Device

Sure, should have nabbed it at the C10 Cruise In on Saturday

If you want to figure out a time to come pick it up, I'm located right off I40 exit 162, but I have a class Tuesday and Thursday nights this week, Wednesday or Friday night, or Saturday or Sunday afternoons work for me.

Bhelton · 06-10-2013, 11:02 PM

Yeah I know I should've grabbed it! Lol
I'll shoot ya a pm
Posted via Mobile Device

ecgate · 06-12-2013, 08:54 PM

Quote:

Originally Posted by GCncsuHD

The one piece is 55" center of u-joint to center of u-joint, and 60.5" from center of u-joint to the tip of the yoke. Let me know if you need any other measurements. I just happen to have a large cardboard tube that it will fit in if I take the yoke off (and pack it down inside the tube with the shaft). I will have to check on shipping and I'll get back to you.

Sure, should have nabbed it at the C10 Cruise In on Saturday

If you want to figure out a time to come pick it up, I'm located right off I40 exit 162, but I have a class Tuesday and Thursday nights this week, Wednesday or Friday night, or Saturday or Sunday afternoons work for me.

Thanks for getting the length on the one piece for me. Sorry to say it is gonna be a couple inches short of what I need so im gonna have to pass.

GCncsuHD · 06-13-2013, 12:07 AM

Quote:

Originally Posted by ecgate

Thanks for getting the length on the one piece for me. Sorry to say it is gonna be a couple inches short of what I need so im gonna have to pass.

No problem

ihssalky · 06-13-2013, 02:30 AM

I will take heavy two piece long shaft as long as shipping to 15301 is not too crazy.
Posted via Mobile Device

GCncsuHD · 06-13-2013, 07:45 AM

Quote:

Originally Posted by ihssalky

I will take heavy two piece long shaft as long as shipping to 15301 is not too crazy.
Posted via Mobile Device

I will disassemble it and ship in two pieces, I'll try to have you a shipping quote by tomorrow.

ihssalky · 06-19-2013, 08:08 AM

Any luck on shipping quote?
Posted via Mobile Device

GCncsuHD · 06-19-2013, 08:35 AM

Quote:

Originally Posted by ihssalky

Any luck on shipping quote?
Posted via Mobile Device

Looks like shipping will be about $35, so $65 shipped.

rmv23887 · 06-19-2013, 01:09 PM

You still have Two piece longbed drive shaft $30 ?? i am in North FLA zip 32259

rmv23887 · 06-19-2013, 01:17 PM

The non-HD second one over, get me shipping quote for zip 32259 i'll take it!

Randy

GCncsuHD · 06-19-2013, 01:17 PM

Quote:

Originally Posted by rmv23887

You still have Two piece longbed drive shaft $30 ?? i am in North FLA zip 32259

Which one? Ihssalky has first dibs on the heavy longbed shaft, still have the standard long bed shaft.

$65 shipped on that one as well.

rmv23887 · 06-19-2013, 04:43 PM

I need standard long bed. How do you want payment PayPal!
Posted via Mobile Device

GCncsuHD · 06-19-2013, 04:45 PM

Quote:

Originally Posted by rmv23887

I need standard long bed. How do you want payment PayPal!
Posted via Mobile Device

PM sent.

ihssalky · 06-19-2013, 08:59 PM

I will take the hd shaft. Pm me for paypal info
Posted via Mobile Device

GCncsuHD · 06-19-2013, 11:00 PM

Quote:

Originally Posted by ihssalky

I will take the hd shaft. Pm me for paypal info
Posted via Mobile Device

PM Sent.

Longbed standard 2 piece sold.
Longbed HD 2 piece pending sale
Shortbed 2 piece pending sale

Shortbed 1 piece still for sale.

GCncsuHD · 06-27-2013, 04:53 PM

Bump for a one piece short shaft!

06-10-2013, 04:23 PM	#1
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Driveshafts, long and short I have four driveshafts for sale. From left to right Two piece longbed drive shaft with HD carrier bearing $Sold Two piece longbed drive shaft $Sold Two piece shortbed drive shaft $Sold One piece shortbed drive shaft $100 Prices are local pickup, shipping would be added to the price above. I can get measurements by request. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s Last edited by GCncsuHD; 06-24-2013 at 01:09 PM.

06-10-2013, 09:01 PM	#2
ecgate Registered User Join Date: Aug 2012 Location: Council Bluffs, Iowa Posts: 280	Re: Driveshafts, long and short Can you get me the measurement of the one piece drive shaft. And how much shipped to 51503.

06-10-2013, 09:10 PM	#3
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshafts, long and short $30 for short bed 2 piece? I'll take it Posted via Mobile Device

06-10-2013, 11:02 PM	#5
Bhelton Registered User Join Date: May 2012 Location: Hickory NC Posts: 2,351	Re: Driveshafts, long and short Yeah I know I should've grabbed it! Lol I'll shoot ya a pm Posted via Mobile Device

06-13-2013, 02:30 AM	#8
ihssalky Registered User Join Date: Sep 2012 Location: washington pa Posts: 217	Re: Driveshafts, long and short I will take heavy two piece long shaft as long as shipping to 15301 is not too crazy. Posted via Mobile Device

06-19-2013, 08:08 AM	#10
ihssalky Registered User Join Date: Sep 2012 Location: washington pa Posts: 217	Re: Driveshafts, long and short Any luck on shipping quote? Posted via Mobile Device

06-19-2013, 01:09 PM	#12
rmv23887 Registered User Join Date: Mar 2013 Location: St Johns FL Posts: 24	Re: Driveshafts, long and short You still have Two piece longbed drive shaft $30 ?? i am in North FLA zip 32259

06-19-2013, 01:17 PM	#13
rmv23887 Registered User Join Date: Mar 2013 Location: St Johns FL Posts: 24	Re: Driveshafts, long and short The non-HD second one over, get me shipping quote for zip 32259 i'll take it! Randy

06-19-2013, 04:43 PM	#15
rmv23887 Registered User Join Date: Mar 2013 Location: St Johns FL Posts: 24	Re: Driveshafts, long and short I need standard long bed. How do you want payment PayPal! Posted via Mobile Device

06-19-2013, 08:59 PM	#17
ihssalky Registered User Join Date: Sep 2012 Location: washington pa Posts: 217	Re: Driveshafts, long and short I will take the hd shaft. Pm me for paypal info Posted via Mobile Device

06-27-2013, 04:53 PM	#19
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Driveshafts, long and short Bump for a one piece short shaft! __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.