Core Support Mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Car'n'Guitars · 07-14-2013, 11:26 PM

Where can I buy support mounts? I have looked at LMC and Brothers truck and I can't find anything. Someone please help me ASAP, thanks.

INSIDIOUS '86 · 07-14-2013, 11:36 PM

For the bushings or grill mounts or hood mounts?
Posted via Mobile Device

Car'n'Guitars · 07-14-2013, 11:48 PM

This. Hope this helps.

DREAMER1 · 07-15-2013, 12:07 AM

Wow that's serious. Looks like you might have to cut one off a frame at your local salvage yard
Posted via Mobile Device

Car'n'Guitars · 07-15-2013, 12:11 AM

Quote:

Originally Posted by DREAMER1

Wow that's serious. Looks like you might have to cut one off a frame at your local salvage yard
Posted via Mobile Device

I may, I was going to buy a perfect 88-91 style Suburban front end but I can't find mounts so I have to hold off until I can find the mounts.

king-918 · 07-15-2013, 12:17 AM

Salvage
Posted via Mobile Device

Car'n'Guitars · 07-15-2013, 12:19 AM

The only problem I will have with that is I can't get air tools into the local yard and its the only one around.

INSIDIOUS '86 · 07-15-2013, 12:31 AM

Well idk about your yards but I use a battery powered grinder and three batteries. Usually does the trick for me
Posted via Mobile Device

Car'n'Guitars · 07-15-2013, 12:36 AM

The closet I can get is a Milwaukee Sawzaw that has 2 batteries.

INSIDIOUS '86 · 07-15-2013, 08:13 AM

http://m.lowes.com/pd_160444-79992-P...ductId=3108359

This is what I have. Lith/ion batteries are very nice to have.
Posted via Mobile Device

SamsAutoParts73-87 · 07-15-2013, 09:17 AM

If you don't have any luck in the junk yard I would try some of the members that are parting entire trucks in the for sale section on the board. They also pop up on eBay from time to time.

-Sam

DREAMER1 · 07-15-2013, 10:22 AM

If a grinders not available, I'd cut the entire horn off the front end and then grind it off at the house
Posted via Mobile Device

mrolds88 · 07-15-2013, 03:11 PM

Is the wole mount thin? If not, I would trim them back until there was enough meat and weld in a new section.

Car'n'Guitars · 07-16-2013, 12:41 AM

Quote:

Originally Posted by mrolds88

Is the wole mount thin? If not, I would trim them back until there was enough meat and weld in a new section.

Not really sure, I thought about doing that but then I couldn't figure a way to keep the sides level.

izzy_Britton · 07-16-2013, 12:46 AM

I work at a salvage yard. we have 3 burbs, I could cut some mounts off for you if you are unable to locate some on your own.

Car'n'Guitars · 07-16-2013, 01:09 AM

I wish I worked at a salvage yard haha.

izzy_Britton · 07-16-2013, 01:30 AM

although i work at a salvage yard, i am only in the yard 1 hour per day, I am the tow truck driver and delivery driver. I am not there enough to round up all the parts that i wish i could hoard. but, I dont. a huge bummer. but it is what it is and when i have the opportunity to help i will.

-Izzy

Quote:

Originally Posted by Car'n'Guitars

I wish I worked at a salvage yard haha.

07-14-2013, 11:26 PM	#1
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Core Support Mounts Where can I buy support mounts? I have looked at LMC and Brothers truck and I can't find anything. Someone please help me ASAP, thanks. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

07-14-2013, 11:36 PM	#2
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Core Support Mounts For the bushings or grill mounts or hood mounts? Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-14-2013, 11:48 PM	#3
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Core Support Mounts This. Hope this helps. Attached Images __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

07-15-2013, 12:07 AM	#4
DREAMER1 Registered User Join Date: Dec 2010 Location: baytown, texas Posts: 310	Re: Core Support Mounts Wow that's serious. Looks like you might have to cut one off a frame at your local salvage yard Posted via Mobile Device

07-15-2013, 12:17 AM	#6
king-918 Registered User Join Date: Nov 2011 Location: Oklahoma City Oklahoma Posts: 1,056	Re: Core Support Mounts Salvage Posted via Mobile Device __________________ <----Christopher My Tardis Oh yeah I'm really a Toyota guy, but had some stuff sitting around. Oklahoma

07-15-2013, 12:19 AM	#7
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Core Support Mounts The only problem I will have with that is I can't get air tools into the local yard and its the only one around. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

07-15-2013, 12:31 AM	#8
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Core Support Mounts Well idk about your yards but I use a battery powered grinder and three batteries. Usually does the trick for me Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-15-2013, 12:36 AM	#9
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Core Support Mounts The closet I can get is a Milwaukee Sawzaw that has 2 batteries. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257

07-15-2013, 08:13 AM	#10
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Core Support Mounts http://m.lowes.com/pd_160444-79992-P...ductId=3108359 This is what I have. Lith/ion batteries are very nice to have. Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-15-2013, 09:17 AM	#11
SamsAutoParts73-87 Registered User Join Date: Feb 2013 Location: Rome PA Posts: 340	Re: Core Support Mounts If you don't have any luck in the junk yard I would try some of the members that are parting entire trucks in the for sale section on the board. They also pop up on eBay from time to time. -Sam __________________ 1987 Chevy R30 CC 454/4spd Work Truck 1979 Chevy K10 SWB 350/4spd/NP205, 1979 Chevy C10 LWB 350/TH350 Project 1981 Chevy K30 350/Th400/NP205 1986 Chevy K30 CUCV 6.2L/TH400/NP208

07-15-2013, 10:22 AM	#12
DREAMER1 Registered User Join Date: Dec 2010 Location: baytown, texas Posts: 310	Re: Core Support Mounts If a grinders not available, I'd cut the entire horn off the front end and then grind it off at the house Posted via Mobile Device

07-15-2013, 03:11 PM	#13
mrolds88 Registered User Join Date: Jul 2011 Location: WV Posts: 946	Re: Core Support Mounts Is the wole mount thin? If not, I would trim them back until there was enough meat and weld in a new section. __________________ 72 GMC C2500 402/Th400 first truck (still have) 77 GMC C3500 CC dually Sold 70 C50 dump truck "Rusty" 87 K10 Suburban Sold 93 K2500 xcab 6.5TD 96 GMC K2500 Suburban 6.5 TD

07-16-2013, 12:46 AM	#15
izzy_Britton Registered User Join Date: Apr 2013 Location: Nor-Cal Posts: 632	Re: Core Support Mounts I work at a salvage yard. we have 3 burbs, I could cut some mounts off for you if you are unable to locate some on your own. __________________ WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too Cream Puff - LS'd Square - Slow going on the back burner Tripple Threat - 3 Wrecks for the price of one build thread Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.

07-16-2013, 01:09 AM	#16
Car'n'Guitars Registered User Join Date: Dec 2011 Location: Elkhart, IN Posts: 1,308	Re: Core Support Mounts I wish I worked at a salvage yard haha. __________________ 1985 Chevrolet K10 Custom Deluxe---SOLD 1997 Ram 2500 5.9 Cummins 1985 Chevrolet Camaro Z28 1987 Chevrolet K10 Silverado "The Beast" build 1987 Silverado http://67-72chevytrucks.com/vboard/s...=1#post6150257



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.